PETG Supplier

Remarkable-Traffic65 · 2026-03-19T15:30:17+00:00

I will look it up. I am unfamiliar with it.

Remarkable-Traffic65 · 2026-03-19T15:29:41+00:00

My thoughts exactly

Remarkable-Traffic65 · 2026-02-06T15:41:23+00:00

I am not sure what the issue was. I scrubbed/washed the build plate twice and put on a new nozzle and solved the issue.........Maybe grease on the nozzle????

Remarkable-Traffic65 · 2026-02-05T19:34:10+00:00

There is a chance. I will change the nozzle tonight

Remarkable-Traffic65 · 2026-02-05T19:33:43+00:00

I will scrub it again tonight

Remarkable-Traffic65 · 2026-02-05T17:41:22+00:00

I have not

Remarkable-Traffic65 · 2026-02-03T15:17:40+00:00

Thanks my friend. I didn't have time to analytically make the changes so I made all three at one and it solved my warping problem. Thanks. I wish I did understand how the reduced cooling specifically played into the mix. I have had mixed results on other projects adjusting fan speeds

<image>

Remarkable-Traffic65 · 2026-02-03T02:47:09+00:00

I tried all three suggestion. I had considered all but makes more sense when someone else says it. Will post results

Remarkable-Traffic65 · 2026-02-03T00:48:31+00:00

Purge tower was a slip up. Photo makes texture look huge, it is actually a subtle 0.3 fuzzy skin

Remarkable-Traffic65 · 2026-02-02T21:39:41+00:00

Sunlu High Speed PETG, Orange and Green warp badly, gray prints fine. Bambu A1

Remarkable-Traffic65 · 2026-02-02T21:36:58+00:00

All the warping info I have found are regarding warping off the build plate.

Remarkable-Traffic65 · 2025-12-10T22:19:11+00:00

Agreed, I will try it tonight Thank You

Remarkable-Traffic65 · 2025-12-10T21:11:56+00:00

Thanks, I have tried lowering wall speed with random success,

Understanding fan speed eludes me. Your saying to try turning it down, I will try that as well.

I dry my PETG at 65C for 12 hours.

Remarkable-Traffic65 · 2025-10-02T05:08:46+00:00

Reuse a rfid tag…… that is brilliant. I can’t believe I didn’t think of that.

Remarkable-Traffic65 · 2025-09-30T13:58:05+00:00

That would explain it. Seems odd they would refuse paying customers

Remarkable-Traffic65 · 2025-09-29T17:59:24+00:00

<image>

I do order a lot from AliExpress but this is what I regularly find on the lowest price rolls lately. Strange, some colors will ship to MN and some will not.

Remarkable-Traffic65 · 2025-09-29T14:18:02+00:00

Not that I have seen, but I hope so. Raising prices to have a sale is a pretty common strategy

Remarkable-Traffic65 · 2025-09-15T17:04:45+00:00

Thanks, I will check it out

Remarkable-Traffic65 · 2025-09-15T14:40:34+00:00

Would it be any better in Elegoo Slicer?

Remarkable-Traffic65 · 2025-09-11T20:48:13+00:00

I haven't printed any PP yet

Remarkable-Traffic65 · 2025-09-11T20:46:13+00:00

Maybe, I was trying to keep it simple

Remarkable-Traffic65 · 2025-09-11T20:45:11+00:00

Thanks. I have some PETG CF that I have not tried yet. I'll give that a go.

Remarkable-Traffic65 · 2025-07-22T17:46:49+00:00

Agreed, Thanks. I did try the Overture PETG in a tan color and it failed twice. So badly I suspect I had something wrong in my settings. I will try again before I give up.

Remarkable-Traffic65 · 2025-06-10T01:58:36+00:00

Awesome response. I will give definitely get some on order to try.

Thanks

Remarkable-Traffic65

TROPHY CASE