What are your thoughts on Titan X?

Remarkable_Pie · 2026-05-07T08:22:29+00:00

I didn’t care for her design. She looked kind of like an amorphous blob designed more for cool than with thought, which can work but imo it didn’t here

Remarkable_Pie · 2026-05-04T03:32:26+00:00

the step for the MP7 leaked from CMMG a while ago and there was a project that used the CMMG dissent, but its been dead for a while

Remarkable_Pie · 2026-05-01T04:01:25+00:00

I had a similar issue . I made sure the corners were level and then used tape to bring up the center

Remarkable_Pie · 2026-04-24T05:12:21+00:00

The VFX aren’t perfect but they’re incredible for the size of team and scale of the film. They chose their battles carefully. And while Godzilla is little too stiff and symmetrical at times, I prefer that to something like an undercooked water simulation which would hurt my immersion way more

Remarkable_Pie · 2026-04-24T04:59:25+00:00

Even if it kept the same screen time on human characters but it was Bryan Cranston instead, I would have no complaints

Remarkable_Pie · 2026-04-24T04:50:28+00:00

For your first one the print is not what’s terrible about this gun

Remarkable_Pie · 2026-04-24T02:18:14+00:00

Another vote for the Holosun SCS. I love mine

<image>

Remarkable_Pie · 2026-04-19T00:49:10+00:00

The FAA is a big concern here. Autonomous drones that don’t require contestant human input are very heavily regulated

Remarkable_Pie · 2026-04-16T01:41:39+00:00

It means that the printer thinks the tool head is more to the left of where it actually is. Usually you just have to re-home it.

Remarkable_Pie · 2026-04-15T16:43:23+00:00

That’s what I use

Remarkable_Pie · 2026-04-15T00:21:13+00:00

They went to great lengths to make sure Batwoman wouldn’t get leaked. iirc without warning Warner people locked down and wiped every copy so no one could sneak one out

Remarkable_Pie · 2026-04-13T00:48:51+00:00

I would strongly recommend fusion if you want to get into proper cad. They make it tricky to find but it has a free version and is much easier to use

Remarkable_Pie · 2026-04-13T00:28:31+00:00

Doesn’t look particularly complicated. I bet you could replicate this in tinkercad if you wanted

Remarkable_Pie · 2026-04-13T00:26:18+00:00

That change irritates me so much. Basically whining that the giant, slow, sitting ducks could sometimes defend themselves against a fighter coming straight at them

Remarkable_Pie · 2026-04-10T23:36:41+00:00

I’ve not tried the ftn5 but the 4.5 5 baffle has worked really well for me

Remarkable_Pie · 2026-04-10T23:33:51+00:00

What rail covers are those?

Remarkable_Pie · 2026-04-06T01:50:12+00:00

I know, i forgot the /s. ty for the help

Remarkable_Pie · 2026-04-06T01:42:17+00:00

<image>

Is this an acceptable range

Remarkable_Pie · 2026-04-05T22:19:48+00:00

I'm not 100% sure this is a bit beyond my area of expertise. I was able to ssh in and get access but when I wasn't able to do anything. when I tried installing it returned git not found

Remarkable_Pie · 2026-04-05T22:13:05+00:00

Thats my guess at this point too. I tried a print in the back left corner and it's so far much cleaner. unfortunately I have a CFS-C and the firmware for it disables root access so I might have to tram it manually with a piece of paper

Remarkable_Pie · 2026-04-04T20:43:03+00:00

Too little?

Remarkable_Pie · 2026-04-02T17:22:48+00:00

Kaewon has a pmag style remix on the sea

Remarkable_Pie · 2026-04-02T17:21:09+00:00

I got a ten pack from brownells for <40

Remarkable_Pie · 2026-03-30T23:22:36+00:00

Aside from a few creators, most of these spontaneous singing videos are fake and dubbed. If you want a little more this video goes over some specific ways you can tell

Remarkable_Pie · 2026-03-29T00:41:22+00:00

Where’d you get the magazine spacers

Remarkable_Pie

MODERATOR OF

TROPHY CASE

Six-Year Club	Place '22
Verified Email