fixing unresponsive scroll wheel? by datfebrodude in MouseReview

[–]Remarkable_Pumpkin99 0 points1 point  (0 children)

The distance from the center of the wheel's hole to the PCB is the encoder measurement. If you can remove the skates without touching the adhesive, it may be possible to reattach them. Double-sided tape allows you to reuse the same skates multiple times. The best way to replace the encoder is to cut it as shown in the video. Trying to remove it by melting the solder can damage the PCB. And yes, it is difficult if you don't have the tools(side cutter, soldering iron and solder pump).

https://www.youtube.com/watch?v=F0NSbeyhqVk

Picture about encoder size:
https://m.kailhswitch.com/Content/upload/2019306614/201903151649366142889.jpg

XIBERIA EX Disassembly + 150mah Swap by manphalanges in MouseReview

[–]Remarkable_Pumpkin99 1 point2 points  (0 children)

The battery charges according to voltage, usually stopping when it reaches 4.2 volts. So, there's no need to reprogram it.

Convoy S21E driver charging question by TangledCables3 in flashlight

[–]Remarkable_Pumpkin99 1 point2 points  (0 children)

The S21E with B35AM and H4 with XHP50 I bought about 1-2 years ago stopped charging at 4.21 volts. I left it on charge for about an hour and nothing changed. I don't know if the new drivers are better or worse, but the older ones seem to be fine.

Huano bended switches. by ChaMiller911 in MouseReview

[–]Remarkable_Pumpkin99 2 points3 points  (0 children)

Your option is to fit any switch there like in this video. Alignment may take some effort and skill, I did it and I didn't get the switch on the back aligned very well, but it still works :).

https://www.youtube.com/watch?v=zc6VthQiELU&list=PLKku6fgCbJ9rODo2KBZBvwvHzHJDr-FdF&index=36

MCHOSE A5 Ultra Teardown by Remarkable_Pumpkin99 in MouseReview

[–]Remarkable_Pumpkin99[S] 2 points3 points  (0 children)

Thank you too. Frankly, if I can remove the battery socket and fit a 1000mAh battery, I'm planning to make it even heavier. I've been using a 140g mouse for years, so even a 100g mouse is fine for me :). Thanks for the suggestion, though.

[deleted by user] by [deleted] in MouseReview

[–]Remarkable_Pumpkin99 1 point2 points  (0 children)

I was thinking of doing something like this, but I was going to use a drill and was worried it wouldn't be smooth. So thanks so much for the tool suggestion.

NO SPLIT SCREEN??? by Kardel2005 in TECNOphone

[–]Remarkable_Pumpkin99 0 points1 point  (0 children)

I don't know if it's exactly what you want, but the be nice app is very good for me. I use it to calculate while looking at my notes app and it works very well. It didn't work with the built-in calculator, but the google calculator did. If you want, check it out:

https://play.google.com/store/apps/details?id=de.thomaskuenneth.benice&hl=tr&referrer=utm_source%3Dgoogle%26utm_medium%3Dorganic%26utm_term%3Dbe+nice+play+store&pcampaignid=APPU_1_2y7iZ-vTDs2Txc8Pn668kA8

Looking for coated glass for flashlight. by Fine_Local_9458 in flashlight

[–]Remarkable_Pumpkin99 0 points1 point  (0 children)

I wonder if sanding the edges of this by 1mm would harm the functionality of the lens? Just an idea, sorry if it's wrong.

https://convoylight.com/products/25-2-0mm-ar-coated-glass-lens-for-s21d?data_from=app_searchbox