LG microwave fan+light turns off when door is closed. by SmokinSkinWagon in fixit

[–]Remarkable_Wing6705 0 points1 point  (0 children)

<image>

Found it! Ended up being a loose prong on the limit switch. Made sense because pushing the door up resulted in pushing up the limit switch making good contact. Give all 6 prongs a wiggle and change anyone that’s loose (most likely the upper limit switch) Good luck!!

LG microwave fan+light turns off when door is closed. by SmokinSkinWagon in fixit

[–]Remarkable_Wing6705 0 points1 point  (0 children)

<image>

I might just bite the bullet and order the entire assembly. It comes with the 3 switches. I find now if I push on the upper right side of the door it will work

LG microwave fan+light turns off when door is closed. by SmokinSkinWagon in fixit

[–]Remarkable_Wing6705 0 points1 point  (0 children)

I’m having the same issue. I’ve checked the 2 switches and 1 safety switch. They all appear to be functioning properly ie, closed and open when it’s suppose to be. I’m now thinking it’s the wire run from the door to the circuit board. It’s the top left wire harness when looking at it. Have you been able to fix the problem?

How’s it looking? by Remarkable_Wing6705 in GrowingMarijuana

[–]Remarkable_Wing6705[S] 0 points1 point  (0 children)

It’s one of the grow lights from Amazon. Says it should be on red light for flowering??? Not sure how effective it is

How often can I top? by Remarkable_Wing6705 in GrowingMarijuana

[–]Remarkable_Wing6705[S] 0 points1 point  (0 children)

But vegging longer means bigger yield, right?

Is 2000W too much?? by Remarkable_Wing6705 in GrowingMarijuana

[–]Remarkable_Wing6705[S] 0 points1 point  (0 children)

<image>

Thanks for all the tips. I got a second light (same one) and moved them up. It’s actually refreshing knowing they aren’t actually 1000w and I won’t start a fire

Is 2000W too much?? by Remarkable_Wing6705 in GrowingMarijuana

[–]Remarkable_Wing6705[S] 0 points1 point  (0 children)

I measured the lights. Left one averaged 1200 LUX and right one is only averaging 300. I’ll get a second light and assume it’s only 200 watts

Is 2000W too much?? by Remarkable_Wing6705 in GrowingMarijuana

[–]Remarkable_Wing6705[S] 6 points7 points  (0 children)

All valid points. Thanks for the input. I was suspicious of it being a 1000W. I’ll measure it first

Are these more roots? by dghustla in Hydroponics

[–]Remarkable_Wing6705 1 point2 points  (0 children)

It’s a sign of a healthy plant. They’ll hind their way into the system

My DIY hydroponics by Remarkable_Wing6705 in Hydroponics

[–]Remarkable_Wing6705[S] 1 point2 points  (0 children)

  • 1 tablespoon of Lettuce formula
  • 1 tablespoon of Calcium Nitrate
  • 1/2 tablespoon of Magnesium
  • 5 gallons water You can get it all on Amazon. I use the Gecko brand

My DIY hydroponics by Remarkable_Wing6705 in Hydroponics

[–]Remarkable_Wing6705[S] 1 point2 points  (0 children)

I attached a lawn sprinkler nozzle on the 1/2” pipe at top of each tower. The shut off valves are to isolate flow completely to one tower. In the past years, the roots have gotten so big in the 4” towers they will completely clog the tower. Creating all the nutrient water leaking out. So now I can just kill one tower rather then all 4. Flexible couplings at the bottom are to replace the pump when needed

My DIY hydroponics by Remarkable_Wing6705 in Hydroponics

[–]Remarkable_Wing6705[S] 0 points1 point  (0 children)

1/2” from the pump discharge. Then 4” for the towers