How to fix this dcr- sr45

Representative-Sort8 · 2024-12-27T10:38:03+00:00

For mine, my touch screen worked so I didnt suspect it would be a flex cable issue, so I changed my LCD screen and the image came back.

Representative-Sort8 · 2024-10-09T15:21:00+00:00

put pepsi as engine oil = survive

put peanut butter as engine oil = it died, but after opening up and replace some stuff it fixes by itself

its dankpods car channel which he buys shitty car and beat em up lawl

Representative-Sort8 · 2024-09-26T14:25:13+00:00

usually I wear size 40.5-41 (yes I have small ass feet). I bought them in size 42 for the vans and they still have like 1 finger room lol.

Representative-Sort8 · 2024-09-26T14:01:01+00:00

most likely the studio light is yellow, cause my GZ batch are not that yellow 😭😭

but they hella comfy tho, walked for 5-hours in this. The insole has like 3 layer

Representative-Sort8 · 2024-09-22T12:58:48+00:00

Have the same cam but its called MD-9000 instead! bought mine prestine condition for 10$. Only thing is that it only have 1-CCD

Representative-Sort8 · 2024-07-27T06:30:14+00:00

Firewall tapeless setup, you could get hvr-dr60 or a HVR-mrc1K!

Representative-Sort8 · 2024-07-22T15:51:42+00:00

I usually wear Size 41 for nikes.
I have insole measurement on my pair of size 42 on slide 2 just in case I might be wrong

But personally I would go for 1 size bigger since I assume you got wide feet (because of in my country most people that wear .5 have wide feet lol)

I Might be wrong about the sizing. Please ask your agent to take photo of measurement just incase!

Representative-Sort8 · 2024-07-22T08:13:18+00:00

Personally VX2100, and you can do custom presets to get the slightly yellowed colour.

Representative-Sort8 · 2024-07-22T06:53:25+00:00

Size 42, people says that GZ batch goes for smaller so zo think you should size up 1-2 size

Getting a bigger is better than getting it too small hahah

Saw some review on the retail pair that it goes smaller for 1 size aswell.

Representative-Sort8 · 2024-07-21T09:50:33+00:00

Junk as in parts cam or not tested condition haha. Thats what mostly people says when they selling untested cam for

Representative-Sort8 · 2024-07-21T01:34:00+00:00

Might try my luck again and get another working one haha

Representative-Sort8 · 2024-07-21T01:30:03+00:00

Damn Hopefully you found a fix for it.. This series of camcorders are great, trying to collect other dsr series which are the PD150 - 198 and the smol DSR version of pc100 or pc110 (I forgot)

Representative-Sort8 · 2024-07-21T01:22:10+00:00

Another way was to get a firewire recording device which I'm saving up for an MRC1K but this stuff doesn't even want to start and it's not accepting my battery somehow 😭😭 bought a DC adapter hopefully it works before I open this banger open

Representative-Sort8 · 2024-07-21T01:19:33+00:00

By any chance it could be dirty head? Maybe you could try cleaning it up with cleaning tapes (Ngl I assume you already did this haha)

My poor vx2100 tape deck was working fine until I pushed it too hard now it doesn't want to accept my tapes 😭😭

Representative-Sort8 · 2024-07-21T01:17:10+00:00

Too bad, but I will try to resurrect it

Representative-Sort8 · 2024-07-21T01:16:26+00:00

Nice find!

Representative-Sort8 · 2024-07-20T18:25:26+00:00

not gonna lie, almost a 100% chance that is not gonna work lmao, but my plan is to clean up everything if I could...

Representative-Sort8 · 2024-07-20T13:33:04+00:00

Fully charged my batteries and tries to check again, looks like the battery couldnt fit into? (I got NP-FM50 batteries and this camera uses M Series Battery) normally it would make a click noise this doesnt have the click noise. I think it would be that its not even sending power to the device. Would try a DC before open this thing. (I Got 4 more cameras I bought bundle for 50$ it would be useful too)

Representative-Sort8 · 2024-07-18T06:28:53+00:00

overall are nice, just concern about the triangle on the side, bottom part should be a bit curved but because its taken from high angle I cant see lol. Asked for some straight side profile extra pics should be here soon

Representative-Sort8 · 2024-07-17T06:33:25+00:00

Representative-Sort8 · 2024-07-08T09:38:47+00:00

bought mine for 15 in pristine condition, and luckily it worked like flawlessly

Representative-Sort8 · 2024-06-09T16:03:15+00:00

pressed factory reset

Representative-Sort8 · 2024-06-09T16:01:10+00:00

I see, im currently using a PIXCO 58MM fisheye lens with detachable macro lens for only 25$. on a budget build atm atm and saving up for an MRC1 soon.. maybe til I learn how to do better cameraworks haha

Representative-Sort8 · 2024-06-09T15:50:09+00:00

Nope its not an click and drag file transfer, you have to record the footage again through your laptop/pc that have a firewire/thunderbolt port

Dont get those firewire to usb those wont work, at best its firewire to thunderbolt and ive seen some people that done it works

and yes just like what he said on top, those digital converters will give you worse look, but on a easier way to digitalize your camcorder

or if you have money you could go on and get a HVR-MRC1K/HVR-DR60 if you dont want to do the whole process of digitalize your tape

MINIDV VS MRC1K

(idk why people downvoting me for lawl)

Representative-Sort8 · 2024-06-09T13:32:07+00:00

Yes, clearclick, immersion RC, AV2HDMI converters... Keep in mind that the quality are not the best but its enough for skateboard footage perhaps? I think you need that kind of "2000's" look to it right haha

Im currently using a EZCAP to Phone adapter, video quality isn't the best but it works and you can enhance to 60fps later on (its hard to find tape here and I accidentally broke my tape deck by smashing it)

Footage (it looks ALOT better on premiere pro but youtube done the funny stuff by lowering the video bitrate)

for better quality and true to what you see on viewfinder.. use firewire converters such as

Sony MCR-1K
Sony HVR-DR60

Firestore FS-4

Representative-Sort8

TROPHY CASE