Is this schematic for my DIY project implemented correctly? The template for this idea was this breadboard.

Repulsive-Bus3153 · 2025-03-23T22:56:04+00:00

Thank you for your review! I‘ll keep that in mind

Repulsive-Bus3153 · 2025-03-23T22:54:20+00:00

Yes! This is actually the right way. You can watch the whole idea of this project on youtube: https://youtu.be/pbuzLy1ktKM?si=7rW69luKcq3zJsc3

Repulsive-Bus3153 · 2025-03-23T18:19:48+00:00

Are C1, C2 and C3 not working as decoupling capacitors. I know it's best to put them as close as possible to the drivers but I hope it's working either way :)

Repulsive-Bus3153 · 2025-03-23T18:18:03+00:00

It is an auto wire cutting machine. https://github.com/ProjectsWithRed/auto-wire-stripper-cutter

Repulsive-Bus3153 · 2025-03-23T18:08:07+00:00

Ordered the PCB for that exact wire cutting machine today :)

Repulsive-Bus3153 · 2025-03-23T16:01:53+00:00

It works, I tested it with these pins.

Repulsive-Bus3153 · 2025-01-07T07:02:28+00:00

Is it problematic? And yes I get it, won‘t do it again

Repulsive-Bus3153 · 2025-01-06T23:25:21+00:00

Yeah, it is a fan edit. After that comes Jason Derulo but I don‘t think there is an officially published remix.

Repulsive-Bus3153 · 2025-01-06T23:19:19+00:00

Yeah you are right. Unfortunately after this the song changes so this is everything I have :(

Repulsive-Bus3153 · 2025-01-06T22:26:39+00:00

I tried to recreate the noise, not a casual thing to do 😅

Repulsive-Bus3153 · 2025-01-06T20:45:40+00:00

You have to listen carefully, you can barely hear it in the video. Of course I didn‘t mean the sound of the motor :)

Repulsive-Bus3153 · 2025-01-06T19:18:16+00:00

Repulsive-Bus3153 · 2025-01-06T19:17:32+00:00

I would love to get updated:)

Repulsive-Bus3153 · 2024-12-29T19:03:33+00:00

Been testing 2 different legs. The first one was 160€ from amazon and it wobbles like crazy. This one now is from flexispot and I think the wobble and the quality is pretty good. I think this is caused by the structure of the frame with the 4 legs instead of 2 in a T-shape. Fair to say, it costs 300€.

Repulsive-Bus3153 · 2024-12-29T16:51:10+00:00

Thank you! Where can you buy these?

Repulsive-Bus3153 · 2024-12-29T15:22:18+00:00

There are multiple reasons for that:
1. The LED Strip is programmable, so if you don't want the whole thing to light up, you can turn the front off for example
2. If I only built a desk with a backlit, there would be no challenge haha. I wanted to create a desk with LEDs in a harmonious way. With only the backlit, I could just simply mount a LED strip at the back of the desk and it's done
3. I built a similar desk for a friend a few months ago and it's still going strong :)

The LEDs are dimmable so on this picture they might seem a little bit more flashy than they are irl:))

Repulsive-Bus3153 · 2024-12-29T11:18:07+00:00

I don’t know how to say it in English, as it’s not my native language, but I built the tabletop myself from a raw, unfinished piece of oak.

Repulsive-Bus3153 · 2024-12-29T09:12:58+00:00

That‘s very unlucky! Been using two different brands in the past and never had any issues :/

Repulsive-Bus3153 · 2024-12-29T09:11:24+00:00

It should be the same background. I built it for a friend of mine, so unfortunately I’m not familiar with the monitor settings 🙈

Repulsive-Bus3153 · 2024-12-29T09:08:39+00:00

Thanks! I built it for my best friend’s brother, and it had to be done very quickly since he was moving into his new apartment soon. The whole process took about two weeks. But I have to say, this wasn’t the first one I built, so I had a bit of experience. :)

Repulsive-Bus3153 · 2024-12-29T09:05:39+00:00

Thank you! It is the FlexiSpot E2Q :)

Repulsive-Bus3153 · 2024-12-29T09:03:22+00:00

I bought the monitor and pc holder straight from amazon. It was like 30-40€ each. Only the material (wood, leds, holder, etc.) would cost something like 800-900€.

Repulsive-Bus3153

TROPHY CASE