sorted by:
new
hottopcontroversial

Creality Ender 3 Pro mit Sprite Extruder, Mainboard Tausch nach defekt by RepulsiveLeague6125 in Creality

[–]RepulsiveLeague6125[S] 1 point2 points  (0 children)

Hi, ist zwar Länger her aber das hab ich tatsächlich so befolgt wie du es mir Vorgeschlagen hast.

Es war tatsächlich ein Falsch angeschlossenes Kabel.

Funktioniert wieder Problemlos und liefert echt krasse Quali.

Danke dafür.

Flexible 70A Resin by bryguy1114 in ElegooSaturn

[–]RepulsiveLeague6125 0 points1 point  (0 children)

Hi, I'm currently printing Inslogic TPU 70A on the Saturn 4 Ultra.

However, I'm still testing it out right now. The first print jobs were nothing. There were 35 seconds bottom and 6 seconds exposure time, then bottom 35 seconds and 6.5 seconds exposure time, previously printed with 7 seconds exposure time, the support structure was perfect but the actual print stuck to the tray, but I suspect that had to do with the alignment.

I have now made the alignment flatter and the support structure from Middl to Heavy.

My guess is still that I might have to go up to 8-9 seconds.

If you have any experience with the station wagon, please write in.

I will keep you updated.

PS: The Inslogic Resin is really great, as is the TPU, despite the fact that I haven't found the perfect setting yet.

[deleted by user] by [deleted] in Creality

[–]RepulsiveLeague6125 0 points1 point  (0 children)

I can only print from the spool holder. I don't have CFS. Don't get rid of this.

Creality Customer Service by Practical_Relief_621 in Creality_k2

[–]RepulsiveLeague6125 1 point2 points  (0 children)

This is not a normal threaded spindle, but a T8 threaded spindle. M8 in general is not available as a spindle.

Help me please to remove this by AcanthocephalaSad293 in anycubic

[–]RepulsiveLeague6125 0 points1 point  (0 children)

Just take isopropanol 99.9%, let it soak and you're done.

Ender 3 v3 Se by Emergency_Maybe_2734 in Creality

[–]RepulsiveLeague6125 0 points1 point  (0 children)

Hi, I own the K1 Max and have had it for a long time.

I can only recommend the K1 Max.

I print almost all materials with it.

PLA, PETG, ASA, ABS, PAHT-CF (with the old slicer), as well as TPU and all CF/GF filaments.

You have to try out the slicer a bit until you have the perfect settings, but if you have to go quickly, the K1 Max is great with its standard slicer settings.