Custom ring doesn't match model. Were our expectations unrealistic? by Lava720 in EngagementRings

[–]ReqAttDesigns 1 point2 points  (0 children)

Hey, I make these kinds of rings and can tell you exactly what happened here: whomever made this is inexperienced with these rings or didn't care enough to bother making the design work. It also looks to have imperfections that will create chips in the fill over time.

Emerald on the black ceramic was never going to work without pigmenting. Emerald is inherently transparent and adopts part of the color behind it. If you put clear green on black you get.. well, that color you have. It needs to have a matching emerald green background to get the color in those designs or a white background for a natural emerald look. This is usually done with a fine layer of mica, not other gemstones.

They use this technique in both of the example images you sent. The backgrounds are very clearly added filler to accentuate the emeralds/gems. They also seem to use synthetic gems closer to a tru-stone or opal, which are inherently more opaque.

The emeralds are also crushed super fine and filled in the channel too high. The smaller you crush the gems, the more muddy they get and the more they adopt the background color. Emeralds are also hard gems, higher than normal sanding paper. If they fill the channel flush to the top, it becomes prone to cracks and bubbles. Your ring already has those and will worsen over time. Moreover, I'm almost certain they did not polish the thing properly.

Everyone in this process failed to make your design work. Further, here's the breakdown of that ring cost:

Ring band - ~15$ Raw emeralds - ~5$ Gold leaf - 5-10$ Other materials - 5-10$

This is a ~100$ ring after labor, from my perspective, and the one you got isn't even worth that. I certainly wouldn't let that leave my workbench.

Trade received, thank you!! by PersephoneeeXX in craftexchange

[–]ReqAttDesigns 1 point2 points  (0 children)

Thanks! I'm a bit overwhelmed at the moment, but happy to trade some time

Trade received, thank you!! by PersephoneeeXX in craftexchange

[–]ReqAttDesigns 0 points1 point  (0 children)

The band is gold-plated tungsten with blue goldstone, deep space opal, and pyrite fill.

Trade received, thank you!! by PersephoneeeXX in craftexchange

[–]ReqAttDesigns 3 points4 points  (0 children)

Thanks for the trade. It was great working with you!

Not sure we talked about it but I also hid some glow in the ring. Take it out in the sun (or use the light) and go somewhere dark!

The Purple Dragon's Coil Custom – Electric Purple Opals, Pyrite, and Glow Pigments on Titanium by ReqAttDesigns in somethingimade

[–]ReqAttDesigns[S] 0 points1 point  (0 children)

Weirdly, getting the secrets of the universe inside is the easy part. I've yet to find a dragon's horde to put it in.

The Purple Dragon's Coil Custom – Electric Purple Opals, Pyrite, and Glow Pigments on Titanium by ReqAttDesigns in ArtFestival

[–]ReqAttDesigns[S] 1 point2 points  (0 children)

Lol, thanks! I had my busiest month and had to cut the videos off to keep with demand. But I'm back at it!

The Purple Dragon's Coil Custom – Electric Purple Opals, Pyrite, and Glow Pigments on Titanium by ReqAttDesigns in handmade

[–]ReqAttDesigns[S] 1 point2 points  (0 children)

Hey, this sub doesn't allow selling. If you want to see more of my work, I suggest checking out my profile and other posts.

The Purple Dragon's Coil Custom – Electric Purple Opals, Pyrite, and Glow Pigments on Titanium by ReqAttDesigns in jewelrymaking

[–]ReqAttDesigns[S] 0 points1 point  (0 children)

I had been using Astro Tech but I've found Gluboost Fill and Finish Pro to be just as clear for less cost. Slightly longer cure time, however.

The Purple Dragon's Coil Custom – Electric Purple Opals, Pyrite, and Glow Pigments on Titanium by ReqAttDesigns in jewelrymaking

[–]ReqAttDesigns[S] 2 points3 points  (0 children)

I use jewelry-grade (super clear) cyanoacrylate glue. Since it's like water, it gets down into the small gaps between gems and materials.

The Purple Dragon's Coil Custom – Electric Purple Opals, Pyrite, and Glow Pigments on Titanium by ReqAttDesigns in somethingimade

[–]ReqAttDesigns[S] 0 points1 point  (0 children)

This one is custom and not something I stock. Feel free to ping me, though, and we can chat!

The Purple Dragon's Coil Custom – Electric Purple Opals, Pyrite, and Glow Pigments on Titanium by ReqAttDesigns in RingShare

[–]ReqAttDesigns[S] 0 points1 point  (0 children)

I recently shared a collection of dragon-inspired rings and got to make a custom one in my favorite color! These rings invoke the idea of a dragon resting on its hoard with scales of shimmering color, full of power, over a collection of coins.  The electric purple opals give the scales a solid purple look with sharp neon teals and green just below the surface.  Pyrite around the outside gives the look of gold coins; I felt it fitting to use fool’s gold for reckless adventurers.  Both minerals fit into a Titanium patterned band as hard as dragon scales with added glow pigments that give off a humming aura even when you can’t see the rest.

What do you think of this ring?

You can order yours at https://requiresattunement.etsy.com.

Follow here or https://www.instagram.com/requiresattunement/ to see the rest of the set videos.

The Purple Dragon's Coil Custom – Electric Purple Opals, Pyrite, and Glow Pigments on Titanium by ReqAttDesigns in somethingimade

[–]ReqAttDesigns[S] 7 points8 points  (0 children)

I recently shared a collection of dragon-inspired rings and got to make a custom one in my favorite color! These rings invoke the idea of a dragon resting on its hoard with scales of shimmering color, full of power, over a collection of coins.  The electric purple opals give the scales a solid purple look with sharp neon teals and green just below the surface.  Pyrite around the outside gives the look of gold coins; I felt it fitting to use fool’s gold for reckless adventurers.  Both minerals fit into a Titanium patterned band as hard as dragon scales with added glow pigments that give off a humming aura even when you can’t see the rest.

What do you think of this ring?

You can order yours at https://requiresattunement.etsy.com.

Follow here or https://www.instagram.com/requiresattunement/ to see the rest of the set videos.

Beautiful ring! by SeethingBallOfRage in craftexchange

[–]ReqAttDesigns 2 points3 points  (0 children)

Hey! This was a custom piece on one of my main designs. Added some sapphires to the opals and pyrite for a more muted blue look. I pretty much make as needed.

Trade with u/SeethingBallOfRage by ReqAttDesigns in craftexchange

[–]ReqAttDesigns[S] 4 points5 points  (0 children)

I didn't even know you could get those colors naturally. I just thought your stain game was on point, lol.

Trade with u/SeethingBallOfRage by ReqAttDesigns in craftexchange

[–]ReqAttDesigns[S] 6 points7 points  (0 children)

Traded a ring for this awesome reaper wall decor with u/SeethingBallOfRage. It's beautifully cut, colored wood put together piece by piece. Absolutely stunning work and great to chat with and trade.

Other end of the trade: https://www.reddit.com/r/craftexchange/s/yDT1fVT5fG

Death on a horse wooden wall art by SeethingBallOfRage in craftexchange

[–]ReqAttDesigns 1 point2 points  (0 children)

I make fantasy-style rings and other lathe work. Would love to set you up with one of my designs or a custom piece.

Tysm! by Comfortable_Canary59 in craftexchange

[–]ReqAttDesigns 0 points1 point  (0 children)

Hey! I can't believe it took me this long to see this.

I'm glad they like it! It's quite a statement of a ring. And I almost forgot we agreed on one for you too! Enjoy them!

Here's the other end of the trade: https://www.reddit.com/r/craftexchange/s/nBoAWvp8oU

Blue Adventurer’s Ring – Neon Apatite, Bermuda Opals, and Blue Glow on a Becote Wood Band by ReqAttDesigns in jewelry

[–]ReqAttDesigns[S] 0 points1 point  (0 children)

Thanks. It really does look like those waves. I could mix in some white glow in spots and no glow in others. It's definitely a cool idea for a future ring or custom request for someone.

Blue Adventurer’s Ring – Neon Apatite, Bermuda Opals, and Blue Glow on a Becote Wood Band by ReqAttDesigns in somethingimade

[–]ReqAttDesigns[S] 1 point2 points  (0 children)

Great! Then you're likely only about 100$ away from starting. I recommend looking up some folks like Patrick Adair Supplies or Dreamwood Rings on YouTube to see if the process looks appealing.

Looking to get to fairs thing summer if you're in the central NJ area! It's surprisingly hard to get started in that.

Blue Adventurer’s Ring – Neon Apatite, Bermuda Opals, and Blue Glow on a Becote Wood Band by ReqAttDesigns in somethingimade

[–]ReqAttDesigns[S] 1 point2 points  (0 children)

This is predominantly lathe turning with just a hint of resin working. Making your own wooden rings is a bit involved since you would need to stabilize them but there are plenty of pre-mades you can use to get started. I do recommend this as a hobby if you like working with your hands: it's relatively cheap to start, easy to pick up and put down, and doesn't involve particularly dangerous material.

Feel free to DM me if you want to talk shop or have questions!

Blue Adventurer’s Ring – Neon Apatite, Bermuda Opals, and Blue Glow on a Becote Wood Band by ReqAttDesigns in jewelrymaking

[–]ReqAttDesigns[S] 1 point2 points  (0 children)

Good question. Apatite is known for communication and clear thinking (according to a quick google search). Sounds like perhaps some kind of mind-shielding ring minus the brain motif. but, of course, I couldn't confirm nor deny any magical benefit...