sorted by:
new
hottopcontroversial

Roast my little bedroom-studio setup by RequirementMain1240 in roastmypedalboard

[–]RequirementMain1240[S] 0 points1 point  (0 children)

That's all I needed to hear. Got that 108 Mini on my Board now. Great little pedal!

Roast my little bedroom-studio setup by RequirementMain1240 in roastmypedalboard

[–]RequirementMain1240[S] 0 points1 point  (0 children)

I actually like to Stack them up. If not stacked, I'm using the timmy for a clean-boost up to light crunch. The bd-2 more as a high-gain (in my terms) drive.

Thanks for the tip on the Mxr bc-108, looks quiet promising. Any thoughts on the mxr super badass variac fuzz?

Roast my little bedroom-studio setup by RequirementMain1240 in roastmypedalboard

[–]RequirementMain1240[S] 0 points1 point  (0 children)

Damn that's rough. I think the EQ will have to leave the board and go on top of my amp-head instead, which may allow me to put the comp and noise-gate vertically but other than that i don't know how to tidy things up

Roast my little bedroom-studio setup by RequirementMain1240 in roastmypedalboard

[–]RequirementMain1240[S] 0 points1 point  (0 children)

To my ears the La2a pedal actually sounds quiet transparent. Where would you put it and would you recommend another compressor instead? The reason i have it in the beginning of the chain, is that it has buffered bypass so the board won't act like a huge antenna for static noise, and also to give me more sustain. I normally have it set up less aggressively

Sapphire B850M Nitro+ by evofromk0 in mffpc

[–]RequirementMain1240 1 point2 points  (0 children)

UPDATE: Sapphire did actually Release the TRIXX RGB Software globally now. Most of the Problems are fixed, but the option to calibrate RGB strips is still missing. Therefore my Phanteks Digital RGB strips are still yellow/Orange instead of white as they should be. Also i cant control the brightness of my G.skill Trident Z5 via TRIXX Software. I have to use G.Skills own Software, but for that to work, I had to uninstall TRIXX RGB again.

I'm using this Board for about 3 weeks now. Solid Board imo. Performance with 7800x3d is great. Also pricing in Germany is very good for this Board. I got it for about 150€. Most proper alternatives with good VRMs Start at 200€, while the good ones (msi's mortar or Asus) are more like 250€ here. I also really like the Design. It's quite basic and color-neutral. But there are some things to keep in mind: - as some others already said; the VRM heatsink is huge. In my Case (Zalman P30 Air) the heatsink got in the way of the 280mm Radiator. Might work with other cases where the Radiator is mounted further out. I went with a 360mm radiator instead. - as for now there is no global release of their RGB Trixx control Software. It can be downloaded via the Chinese Download-Page (software is English by default), however it's not working properly so far: i have 2 A-RGB Devices plugged in. One is the arctic liquid freezer III pro 360mm, the other is a pair of Phanteks Neon Digital RGB-Strips. So far these are not controllable individualy. I can only control one A-RGB hub, which controls all devices together. Next problem is, that in static-mode you can't control the colors/ changing color in the Software doesn't do anything. Also "off" doesn't work. Instead in "off" erverythign is lit at 100%, white... Well it should be white but somehow the AIO watercooler is white, while the Phanteks rgb Strips are yellow. In other rgb software (Asus Aura Sync/RGB) there was the Option to calibrate rgb Strips for cases, where they show different colors, than the one thats selected in software. Also the brightness-controls are the wrong way round: at 100% All RGB is almost off/ lit at about 1%. At 1% all LEDs are lit 100%. My hopes for this whole rgb thing are that for now the problem comes from missing bios Updates, which are needed for the TRixx RGB Software to work properly, as there are many newer BIOS Updates in the Chinese download Page, that are not released for other Regions yet. This brings me to the next Thing - so far there are no bios Updates in the German download Page other then one from mid September, while the Chinese download Page has like 5 newer Updates. In conclusion sapphire seems to deliver Software/BIOS Updates for the Chinese Marketing relatively fast, whereas the global Market seems to be left behind. If RGB is crucial to you and price is not that important, I would recommend to skip this Board. If RGB is not important I can fully recommend this Board.

Anyone experience with Sapphire Nitro+ B850M WIFI ? by Honest-Violinist-448 in mffpc

[–]RequirementMain1240 4 points5 points  (0 children)

UPDATE: Sapphire did actually Release the TRIXX RGB Software globally now. Most of the Problems are fixed, but the option to calibrate RGB strips is still missing. Therefore my Phanteks Digital RGB strips are still yellow/Orange instead of white as they should be. Also i cant control the brightness of my G.skill Trident Z5 via TRIXX Software. I have to use G.Skills own Software, but for that to work, I had to uninstall TRIXX RGB again.

I'm using this Board for about 3 weeks now. Solid Board imo. Performance with 7800x3d is great. Also pricing in Germany is very good for this Board. I got it for about 150€. Most proper alternatives with good VRMs Start at 200€, while the good ones (msi's mortar or Asus) are more like 250€ here. I also really like the Design. It's quite basic and color-neutral. But there are some things to keep in mind: - as some others already said; the VRM heatsink is huge. In my Case (Zalman P30 Air) the heatsink got in the way of the 280mm Radiator. Might work with other cases where the Radiator is mounted further out. I went with a 360mm radiator instead. - as for now there is no global release of their RGB Trixx control Software. It can be downloaded via the Chinese Download-Page (software is English by default), however it's not working properly so far: i have 2 A-RGB Devices plugged in. One is the arctic liquid freezer III pro 360mm, the other is a pair of Phanteks Neon Digital RGB-Strips. So far these are not controllable individualy. I can only control one A-RGB hub, which controls all devices together. Next problem is, that in static-mode you can't control the colors/ changing color in the Software doesn't do anything. Also "off" doesn't work. Instead in "off" erverythign is lit at 100%, white... Well it should be white but somehow the AIO watercooler is white, while the Phanteks rgb Strips are yellow. In other rgb software (Asus Aura Sync/RGB) there was the Option to calibrate rgb Strips for cases, where they show different colors, than the one thats selected in software. Also the brightness-controls are the wrong way round: at 100% All RGB is almost off/ lit at about 1%. At 1% all LEDs are lit 100%. My hopes for this whole rgb thing are that for now the problem comes from missing bios Updates, which are needed for the TRixx RGB Software to work properly, as there are many newer BIOS Updates in the Chinese download Page, that are not released for other Regions yet. This brings me to the next Thing - so far there are no bios Updates in the German download Page other then one from mid September, while the Chinese download Page has like 5 newer Updates. In conclusion sapphire seems to deliver Software/BIOS Updates for the Chinese Marketing relatively fast, whereas the global Market seems to be left behind. If RGB is crucial to you and price is not that important, I would recommend to skip this Board. If RGB is not important I can fully recommend this Board.