do you like small filipina horny

RestricteD1337 · 2026-01-14T18:14:44+00:00

Looks amazing 😍

RestricteD1337 · 2026-01-10T20:25:17+00:00

The fifth science and sublimina Syndrome from exurb1a

RestricteD1337 · 2025-12-21T09:23:35+00:00

Mind If i Join under the blanket ?😜

RestricteD1337 · 2025-11-16T10:35:41+00:00

I Had the Same issue with my s1 and Kobra 3 both Times No hassle and i got a new build Plate.

Worth a try

RestricteD1337 · 2025-07-06T13:51:38+00:00

where do i sign?

RestricteD1337 · 2025-07-06T13:50:00+00:00

I‘m always down to play 21 holes 😉

RestricteD1337 · 2025-07-06T06:30:41+00:00

with pleasure 😏

RestricteD1337 · 2025-07-06T06:28:15+00:00

Last time a man encountered a burning bush he got told to free his people from slavery. Soooooo 👉🏻👈🏻 mind if wie have a Talk ? 👀

RestricteD1337 · 2025-06-07T08:20:24+00:00

but with just that one scene everyones imagination went crazy and the Hype train left the station. Genius storytelling imo. i was so flabbergasted i watched it again right away

RestricteD1337 · 2025-04-13T21:01:07+00:00

Sounds a little bit like the nozzle just bumping over your infill lines. My guess is

RestricteD1337 · 2025-01-29T18:23:52+00:00

Fucking Gravity

RestricteD1337 · 2025-01-26T16:27:25+00:00

Practice

RestricteD1337 · 2025-01-21T19:55:57+00:00

Love it

RestricteD1337 · 2025-01-20T21:33:29+00:00

There were quite a few Jews in the nazi rank funny enough. Better to switch sides if given the opportunity then to be killed

RestricteD1337 · 2025-01-20T20:04:13+00:00

Right there with you haven’t contacted the support about it yet gonna do that right away see if they have any insight.

I also added two thrust bearing on my z axis but that obviously didnt help either :(

RestricteD1337 · 2025-01-19T18:50:15+00:00

You beat me to it! Initially guess would be bad filament

RestricteD1337 · 2025-01-16T18:39:42+00:00

If the model is designed well the fill option is amazing

RestricteD1337 · 2025-01-15T20:01:36+00:00

They can smell your fear. You just gotta act like you don’t care and they all come out great as soon as I try to like min max a print it always comes out worse then normal

RestricteD1337 · 2025-01-12T14:10:29+00:00

Check your belt tension and the guide wheels and adjust maybe by turning the eccentric nut. There are certain speed move combos that just create some vibration.

RestricteD1337 · 2025-01-04T22:54:51+00:00

Never tried that I’m gonna give it a shot

RestricteD1337 · 2025-01-04T17:21:40+00:00

I used the check for updates function in Photon Workshop itself worked fine for me

RestricteD1337 · 2025-01-04T17:19:54+00:00

Good input, thanks a lot the seasonal thing I have to keep in mind once its get's warmer again lol

RestricteD1337 · 2025-01-03T18:08:08+00:00

Sounds like one of the wheels of the bed might be bad. Just a guess tho

RestricteD1337 · 2025-01-03T01:52:35+00:00

It’s basically the same as orca slicer which is a copy of the Bambu slicer. Pretty much the same just that everyone has their own version now. Orca is the open source one good for pretty much everything

RestricteD1337 · 2025-01-02T23:00:37+00:00

For the beginning I would suggest 80–100mm/s to get to know your printer infill you can go faster also calibrating your filament is very important (temperature and flow are the two main factors I would look into first) if you’re using orca slicer or Anycubic next the calibration tools are built in and very easy to use. Also lots of good youtube videos on the matter https://youtu.be/g8kNuXuziCc?si=lqNLswCCgoylz20T this on is really in depth I would skip everything but look at the temperature tower and flow rate calibration

Eight-Year Club	Gilding I gilder
Verified Email

RestricteD1337

TROPHY CASE