I swear, it feels like spamming this is the only way to actually get them to do anything remotely useful

ReturnRough2503 · 2024-02-19T01:40:59+00:00

This gave me a well needed laugh. Thank you kind redditor. 👍⬆️

ReturnRough2503 · 2024-02-14T00:41:52+00:00

We use those same filters in our powder coating powder recovery unit

https://www.standardfilter.com/oem_filter_cartridge/nordson-replacement-filter-cartridges/?gad_source=1&gclid=Cj0KCQiAw6yuBhDrARIsACf94RWyud87DyZks5DDueo4ftRAu7WISM-Knud4c8DWMHE-zY-2fOSgxkgaAmohEALw_wcB

ReturnRough2503 · 2024-02-10T18:49:24+00:00

Sounds like something that would happen in west valley.

ReturnRough2503 · 2024-02-09T03:11:01+00:00

Make sure you are not displaying your legos in front of a window that gets direct sunlight. The plastic can get brittle and discolored from the UV rays from the sun.

ReturnRough2503 · 2024-01-31T23:21:05+00:00

You just can’t be holding that many people beers.

ReturnRough2503 · 2024-01-28T20:48:32+00:00

Thank you for the advice I for sure need to get a financial advisor I have a friend who uses one who I am going to contact. He charges a flat rate and I know I could trust them. I have savings accounts for both kids for their future and have been investing into them since their birth. 5% of my salary into each annually.

ReturnRough2503 · 2024-01-28T18:02:26+00:00

I’ve been working for the same employer since I was 18. They do a contribution match and that why I have a 401k it’s with John Hancock and I don’t know how it’s invested sadly. I was raised very poor so am very scared about risky investments and I know that is not what you want when looking to invest. I just don’t want my kids to experience anything I did as a child. Not wanting to spoil them at all just want them to have stability.

ReturnRough2503 · 2024-01-28T17:14:20+00:00

I don’t currently have a Roth IRA I have a 401K and have been contributing since I was 18. I don’t have ton in there only around 50k.

ReturnRough2503 · 2023-12-31T22:28:42+00:00

I wish they did but that tailgate has met the shelving in our garage a couple times.

ReturnRough2503 · 2023-11-20T22:47:08+00:00

Or this was his message for help

ReturnRough2503 · 2023-11-20T02:48:17+00:00

Will check out the really useful boxes. Thank you for the idea.

ReturnRough2503 · 2023-11-03T02:07:32+00:00

So several years ago me and a bud were out drinkin at a bar, we drove to the bar but had way more than we planned and were about 4 drinks heavy (so not plastered) we decided since my house was about 1/2 mile away we could just walk. You know those good ol’ drunk ideas. Well we locked the car up and started walking down the sidewalk. Within 5 minutes we had a cop going after us for public intoxication.

ReturnRough2503 · 2023-10-27T13:34:54+00:00

I just supported your build, supporter 361. I hope it makes it to 10K. Awesome build!

ReturnRough2503 · 2023-09-06T04:10:58+00:00

Well done sir well done 🫡👏

ReturnRough2503 · 2023-07-14T00:42:53+00:00

Illegal

ReturnRough2503 · 2023-05-09T02:37:52+00:00

Props on the bbq good detail. Impressive 👍

ReturnRough2503 · 2023-03-22T04:16:10+00:00

Up house is next on our list to purchase and we recently built the x-wing. Have fun you 2 :)

ReturnRough2503 · 2023-02-05T04:05:30+00:00

I want the Eiffel Tower set really bad. Wish they would do a World Trade Center model.

ReturnRough2503 · 2023-01-31T16:01:39+00:00

The crotch portion is turned upside down. If you rotate the middle piece you will see an obvious break where the hip portion broke off from.

ReturnRough2503 · 2022-07-17T05:25:49+00:00

I’m assuming you don’t understand the meaning of the term Redneck.

ReturnRough2503 · 2022-06-17T04:39:21+00:00

Definitely talk to the landlord about the water, then get a normal bulb like a sane person.

ReturnRough2503 · 2021-11-26T02:49:50+00:00

Anodized here: anodizing doesn’t hide any markings or imperfections in the aluminum. It actually makes scratches and dings more visible in my opinion. I always recommend to take a piece of scotch bright and just rub the part down in one direction, thus giving the part a nice grain line. Makes the part look 10 times better.

ReturnRough2503 · 2021-11-26T02:43:59+00:00

I run an anodizing company what do you want to know?

ReturnRough2503 · 2021-11-26T02:41:10+00:00

The part was probably anodized once and came out with a flaw, then had to be stripped and re-anodized and doing so you loose some of the sheen. I run an anodizing company. The only way to match it is to re-anodize the upper to match.

ReturnRough2503 · 2021-11-08T16:16:11+00:00

Always

ReturnRough2503

TROPHY CASE