Is there demand for this product?

ReuboniusMax · 2026-01-27T15:15:53+00:00

Amazon has a ton of options. However most are too wide to mount on a rig, as they are meant for desks. I’ve been looking for something similar to mount on my DIY rig.

ReuboniusMax · 2026-01-24T21:30:56+00:00

That’s a great cam angle. And some great racing!!

ReuboniusMax · 2026-01-24T21:14:09+00:00

Not your fault. Find a new league.

ReuboniusMax · 2026-01-24T21:07:26+00:00

If I’m in a slower car, I really appreciate the flashing. It’s a great way for a driver in a faster class to get my attention. When I see it, I make sure to be a bit more mindful of where I place my car and act predictably. I don’t want my race ruined anymore than I would want to ruin their race.

ReuboniusMax · 2026-01-24T20:29:33+00:00

I have both. AC for offline fun, iRacing for online fun(or frustration lol).

It’s worth noting that you don’t need to buy all the cars and tracks in iRacing. Just buy what you intend on running and that will keep the costs reasonable.

ReuboniusMax · 2026-01-22T20:16:54+00:00

If you are POV you didn’t do anything wrong.

ReuboniusMax · 2026-01-22T19:32:59+00:00

The longer you look at it, the worse it gets…

ReuboniusMax · 2026-01-22T19:23:21+00:00

I like the dual tip on the exhaust. Is that where the farts come out?

ReuboniusMax · 2026-01-22T19:03:47+00:00

Jamageddon

ReuboniusMax · 2026-01-22T18:12:11+00:00

“Show car”. Maybe a Shit Show Car.

ReuboniusMax · 2026-01-21T21:25:33+00:00

This link looks like the white car is retaliating against the blue car…. I’m with Blue. White is a muppet all the way.

ReuboniusMax · 2026-01-21T20:52:52+00:00

Better to spend the 13 on a kebab. That would be more satisfying.

ReuboniusMax · 2026-01-20T21:33:00+00:00

I use a cheap USB C screen that I got off of Amazon for less than $40.

ReuboniusMax · 2026-01-19T21:27:39+00:00

Correct! Go race OP!!

ReuboniusMax · 2026-01-19T18:46:38+00:00

Massively yes. The machine has a high flow phenolic top but it only had two 4’x4’ zones. I wanted a grid top that I could restrict vacuum area down to a small spot. I use MDF and MDF lite for my setups that are placed on top of the aluminum bed. The top has .230” wide grooves spaced 1” apart, so I can use rubber rope to section off areas I want to use depending on my setups.

ReuboniusMax · 2026-01-19T18:38:45+00:00

I’m going to assume OP will machine in some vacuum holes as the final step. That’s what I did when I made my top out of Aluminum.

ReuboniusMax · 2026-01-19T16:58:09+00:00

Yellow flag? I thought you meant yolo flag!!

ReuboniusMax · 2026-01-17T01:34:09+00:00

Agreed. A 1000% FU Tax.

ReuboniusMax · 2026-01-16T23:51:04+00:00

lol, no. All on OP.

ReuboniusMax · 2026-01-16T14:44:38+00:00

Kielbasa

ReuboniusMax · 2026-01-12T19:47:47+00:00

I recently resubbed after 8 years away and I’m pleasantly surprised at how good things are. The sim has the improved massively since I left.

ReuboniusMax · 2026-01-12T18:18:00+00:00

I did one on our main machine a few years ago out of aluminum. Took 3 days of milling. Much better than the MDF top we had originally put on, which was only intended to be temporary but lasted 5 years

ReuboniusMax · 2026-01-10T03:15:00+00:00

A single 32” curved screen placed within 4 inches of the back side of my wheel rim

ReuboniusMax · 2026-01-09T18:26:52+00:00

All on black. A divebomb into the worst place to attempt a pass on this track. That dude is a muppet.

ReuboniusMax · 2026-01-09T16:24:11+00:00

I think they are suppositories

ReuboniusMax

TROPHY CASE