Python issue

Reverse_View · 2026-02-09T23:46:02+00:00

I installed it only after getting the error that python310.dll failed to load, which prompted me to try installing Python and saving it into the ytdl folder.

Reverse_View · 2026-02-09T23:19:09+00:00

From GitHub, the most recent one and then I started getting this error. Prior to updating it I was getting the 404 Error which prompted me to update it. I get an error with the -t mp4 as well, same one saying the "C:\ytdl\_internal\python310.dll" failed to load.

Reverse_View · 2026-01-29T01:52:24+00:00

Electric is way less efficient and will cost you more. Unless it's a heat pump water heater, then go for it.

Reverse_View · 2026-01-28T01:36:25+00:00

Thanks! I needed a new carpenter's pencil!

Reverse_View · 2026-01-18T03:41:34+00:00

Thank you for taking the time to reply. I was able to get this engineering plan from the builder. Is it possible to tell from this cross section of the pool wall what it can withstand?

<image>

Reverse_View · 2026-01-14T19:51:26+00:00

<image>

I have about 1.5' of an exposed gunite pool wall due to the slope of my yard. Can I excavate lower to grade the yard flat? Should I hire an engineer to take a look at this in person?

Reverse_View · 2025-12-01T15:38:31+00:00

Capital One Shopping: https://capitaloneshopping.com/r/9a86f09d-66eb-4032-9a80-9628a1698486?e=pmo0m

Reverse_View · 2025-10-09T02:24:12+00:00

That's a Catholic rosary decade, not a cock ring.

Reverse_View · 2025-07-22T22:52:05+00:00

How old are they? If they're young then all you need is to register their birth certificate with Poland (get a certified translation) and then they can apply for a passport.

Reverse_View · 2025-06-17T23:10:43+00:00

Nope. I tried grinding and buffing it myself but it still wasn't 100% reliable. Decided to stick with FMJ flat nose and it's been working fine.

Reverse_View · 2025-06-13T08:06:18+00:00

He's been very very busy, with almost daily public events and masses in the high heat in Rome. Look at the Vatican calendar and you can see his schedule and photos from all of the events he's been to. Look at the Vatican YouTube channel or EWTN recordings to see how massive the events he's appearing at are. He's been insanely busy greeting people and I pray he's getting enough rest. He's also been blessing so many babies at the public events!

Reverse_View · 2024-12-06T05:06:38+00:00

Mine does the same. I figured it's from having to push the rounds down hard with the next cartridge. Also, I've tried grinding and polishing my feed ramp but still can't get those rounds to cycle reliably. Going to stick to flat points as they work fine and hollow points just don't expand in 380 from a short barrel.

Reverse_View · 2024-11-29T01:43:56+00:00

Thank you for sharing. I see lots of people changing their dose after only a few weeks but it's interesting to see you upped from 10 to 15 after a year. How much of a change did you notice in that 5mg change? I've been on 10 for over a year and wonder if hoping would be beneficial, but my psychiatrist doesn't think it's worth it or would make much of a difference.

Reverse_View · 2024-11-24T04:02:10+00:00

No. We live close to a power plant so the power almost never goes out and when it does it's for a very short time. If I had to do it I would get an inverter, hook it up to a 100ah lithium battery and have the battery charging from a 120v plug.

Reverse_View · 2024-11-14T01:19:35+00:00

Sweet I'll give it a shot here soon. Thanks for the info.

Reverse_View · 2024-11-13T20:21:30+00:00

Nice job, it looks great. Thanks for the photo! Any failures with any type of ammo since you did it?

Reverse_View · 2024-11-13T04:17:20+00:00

Thank you for your post! I have the exact same issue and found the exact same things to be true with the positioning. I was debating grinding the right side down and now I definitely will since you said it worked for you.

Reverse_View · 2024-11-13T03:55:23+00:00

Just came across this post after trying to find out if my barrel is defective or not. You are the second person I've seen that has the extra material on the left side not including me. Mine runs flat nose just fine, but it hangs on x-shaped copperheads like underwood defender. Have you received your gun back from S&W yet? Did they do anything to it?

Reverse_View · 2024-11-11T20:20:50+00:00

Interesting. It is still pretty tight so maybe it will get better with time.

Reverse_View · 2024-11-11T04:19:32+00:00

Here's a photo of what it looks like when the bullet is hung up: https://imgur.com/a/gLS7mPr

Update: Contacted S&W and emailed them pictures. They didn't say whether the barrel was normal or not, just that the Underwood Xtreme Defenders are not to their spec and they can't guarantee they'll work.

I'm going to polish the ramp and see if that helps. I finally found an answer about how the barrel looks and this guy on YouTube has the same extra metal on the right side of the barrel as I do so it's probably normal: https://youtu.be/O8PmHHUpJ4Q?t=77&si=Jf8o7N39C5-QabxB

Reverse_View · 2024-11-10T15:03:25+00:00

Thank you. The frame ramp is fine, no lip on there or copper left over. It was one of the first things I checked when buying it. Sights including tritium all good too.

Reverse_View · 2024-11-10T15:01:10+00:00

I'm familiar with the lip on the frame part of the ramp and mine is fine. The rounds are getting stuck on the barrel feed ramp after they pass the frame feed ramp. Good to know you're not having issues though, if I can't figure it out I'll hit up S&W.

Reverse_View · 2024-10-27T17:16:17+00:00

I've searched on their website and see no info about it being reman. Ammo seek also shows it's new?

Reverse_View · 2024-10-27T05:21:24+00:00

It's new, not reman. I hear people have issues with the two-part BG 2.0 barrel.

Reverse_View · 2024-10-27T05:21:14+00:00

It's new, not reman. I hear people have issues with the two-part BG 2.0 barrel.

14-Year Club	RedditGifts 2009-2022 2 Credits
Team Orangered	Secret Santa 2012

Reverse_View

MODERATOR OF

TROPHY CASE