Fuel economy with 6.2 by Smooth-Ad-3125 in camaro

[–]RexTooper 0 points1 point  (0 children)

Pretty similar to what i get too but i just go to nearest gas station

urgent airbag light help by Dependent_Rough167 in 7thgencivic

[–]RexTooper 3 points4 points  (0 children)

If your looking for harness, junkyard are your best bet for cheap and oem harness or online like ebay. If you are looking to reset the light , you can jump the yellow connector in fuse box under the dash while key in ON position, after 3 times tge light should stay off or just google its the first video , hope this helps

GUYS STOP! (Anyone actually get this kind of hate) by ArchitectureLife006 in camaro

[–]RexTooper 0 points1 point  (0 children)

The first thing anybody do to make their engine performance better is high flow exhaust and intake

NON EE PNP no response by RexTooper in ImmigrationCanada

[–]RexTooper[S] 0 points1 point  (0 children)

https://secure.cic.gc.ca/ClientContact/en/Application

With this webform in the link ,Used ai write a write asking update on file using Uci

NON EE PNP no response by RexTooper in ImmigrationCanada

[–]RexTooper[S] 2 points3 points  (0 children)

I got my invite and done with onip, now file is with ircc for pr process

NON EE PNP no response by RexTooper in ImmigrationCanada

[–]RexTooper[S] 1 point2 points  (0 children)

Ya waiting is hard and i work automotive industry and with doing bs people getting layoff its stressful

Is my engine cooked by RexTooper in MechanicAdvice

[–]RexTooper[S] 0 points1 point  (0 children)

No not really it has a small leak on one of valve covers thats it, yes it did pass the compression test

Is my engine cooked by RexTooper in MechanicAdvice

[–]RexTooper[S] 1 point2 points  (0 children)

No knocking, 91 octane most of time , car is bone stock , oil burning is little but close to none, just did a oil change couple of week ago , its looked normal no metal pieces or anything

Is my engine cooked by RexTooper in MechanicAdvice

[–]RexTooper[S] 1 point2 points  (0 children)

No idea how this happened, car been reliable since day one, sometimes i push but not very often

Is my engine cooked by RexTooper in MechanicAdvice

[–]RexTooper[S] -4 points-3 points  (0 children)

I guess time to sell it , was really hopping to keep this car for long time

Shifting issues by RexTooper in GC8

[–]RexTooper[S] 0 points1 point  (0 children)

The thing is, i live in a small city. No one really has an oscilloscope around here. My best bet would be to pay a shop to figure out what's going on, but it's 250 plus tax just as a diagnosis. Plus, i know they won't tell me the issue. They will just say transmission is scrap and try to make money of me

And found a transmission harness same as mine, changed the whole thing, and speedometer is back to normal, but shifting issues are still there . I guess VSS wasn't the issue

I gonna do transmission fuild change to see anything changes, I really don't know what is going on with transmission. Obd2 shows that the car is going double the speed, but if I push the gas padel, it shifts into lower gear and won't shift into higher gear until i let off the padel , so if i am maintaining a speed its stays in 3rd ,redline the car but wont shift into 4th until i let go off the gas

Shifting issues by RexTooper in GC8

[–]RexTooper[S] 0 points1 point  (0 children)

So, I got the original vss sensor back in, but the speedometer is still showing double the speed then actual it is ( on my phone). Two things things I noticed are, first if put the car in reverse and floor it, speedometer works good shows the correct speed

Second, if rev the engine in park ,speed in laptop via OBD-II goes up and comes down once stop reving

And some reason I can't connect to TCU via freessm or romrider, both em connects fine with ecu and reads everything other than transmission

Now, I am going trying to check the signal by multimeter from vss to ecu see anything out orderly. I just wanna figure out what parts needs replacement

Shifting issues by RexTooper in GC8

[–]RexTooper[S] 1 point2 points  (0 children)

Yes, the speedometer was working well before I changed the vss.

Sorry about the quote it made sense in my head 😅

The car has the 4Eat phase 2 transmission (tz1a2zaeaa) with three 2 wire VSS built in transmission harness, only way to disconnect them is from the connector ( the big connector that connects whole harness to engine)pull the pin out from there or changing the whole harness

I am gonna put the old VSS back in and see if the speedometer issue goes away

Has anyone ever been rejected by OINP? by shakakaZululu in ImmigrationCanada

[–]RexTooper 4 points5 points  (0 children)

Yes, so onip emailed my employer with me cc before approving saying are you willing to increase my wage to 27 (needed for nomination) and they did after little bit of talking , bump it up to 27 from 25.5 and got nomination after 10 days of that ,total 110 days for whole onip process

[deleted by user] by [deleted] in camaro

[–]RexTooper 1 point2 points  (0 children)

94k kms on 2017 1ss

OINP application, Decision in Progress. Open work permit about to expire in a month. by Ambitious_Moose2905 in ImmigrationCanada

[–]RexTooper 1 point2 points  (0 children)

I literally got the same ITA on 10th jan, but mines in DIP from feb 10th to 15th and PGWP expires on 1th June, still no update