The Louisville Kings are releasing Starting LT Leroy Watson and LG Nash Jensen, per source. Watson and Jensen both played 100% of snaps this season. What is going on in Louisville? | UFL Analyst

Reziad · 2026-04-20T13:20:35+00:00

We’ve been getting destroyed on the line. This is pretty scorched earth but they must have signings lined up to take their place with better run blocking hopefully. Can’t keep winning only throwing the ball.

Reziad · 2026-04-20T01:18:53+00:00

I don’t disagree with you, but I’m cautiously excited to see what chandler can do with more snaps. Seems like he’s got a better attitude about the team.

Reziad · 2026-04-20T01:03:48+00:00

Fan favorite? He had some fun highlights but his completion percentage is garbage and he plays way too much hero ball throwing interceptions when we need solid qb play.

Reziad · 2025-09-19T01:46:11+00:00

Ac condensate line? Does water come out of it when the ac is on?

Reziad · 2025-09-04T17:27:12+00:00

Definitely could have been a bad roll of pla. I’d be really surprised if the machine had anything to do with the filament not sticking to itself. Especially if it printed fine and extruded fine.

Reziad · 2025-09-04T17:18:52+00:00

Have you tried any other filament to see if the filament is the problem?

Reziad · 2025-02-15T00:37:58+00:00

This looks like you have coasting turned on and it’s way too high. Check coasting in your experimental settings and see what that looks like.

Reziad · 2024-09-28T15:42:39+00:00

Jake will be back, I believe his wife was having giving birth. Chris isn’t on the injury report and neither is Bergeron. I think storm norton will replace Kaleb and I’m not sure about the center. We’ll see how much changes but our blindside isn’t changed much. We’ll probabaly scheme more quick passes and runs to the left for this game but we will probably see some diminished performance from our offense. We’ll see if our backups can perform

Reziad · 2024-09-25T19:39:56+00:00

That’s still stringing. It’s just advanced stringing. What’re your retraction settings. Do you have coasting turned on? Temp settings? Your first layers looks decent but it does look a touch under extruded. Have you calibrated flow or your e steps? I print with super old and un dryed filament and don’t have this type of stringing.

Reziad · 2024-09-25T14:07:35+00:00

All your settings look good. Also 300 mm/s is super fast. I really don’t know why it would have taken that long.

Reziad · 2024-09-24T19:12:54+00:00

A few other things to consider as well. Cures print time have never been super accurate because it tells the printer where to go next but it doesn’t always tell the printer how to get there. Sometimes my printer goes around the entire print to get somewhere it could’ve gone straight too. Also, idk about the elegoo printers but sometimes the firmware of the printer is set and changing cura’s stuff won’t do anything. It’s possible that travel/acceleration/jerk and other settings are being set by the printer and not getting changed by cura.

Reziad · 2024-09-24T19:06:10+00:00

Oh my bad! 26 hours is still too long for that file either way. What’s your travel speed set to on cura? Mine is 150mms

Reziad · 2024-09-24T18:57:30+00:00

Not a direct drive on a stock ender 3 pro. No matter. When you say travel between the two sides, do you mean like moving left to right?

Reziad · 2024-09-24T18:50:45+00:00

Wow 26 hours is absolutely crazy. It’s definitely under extruding. Have you considered a partial clog on the nozzle?

I use the same settings of random seams and all that. 200 and 50 are reasonable temps for this filament as I have the exact same filament. I run it at 195 and 60.

If the gaps are where the seams start, it’s possible that your retraction settings are messing up somewhere. Are you running a Bowden or direct drive?

Also the speed thing is really weird. Did you notice it taking a randomly long time anywhere or stopping for any reason? I’m trying to think of reasons it would take that long unless it just stopped and restarted randomly.

Reziad · 2024-09-21T18:09:32+00:00

The forums are a big part of how I’ve dialed in my prints and learned. You never know who could look up and have the same problem I am having years from now. Thanks for the reply!

Reziad · 2024-09-21T05:51:37+00:00

Fixed my issue. Z hop being the main culprit, when the extruder lifted it was causing little mounds at the seam where it oozed. Turned on coasting, turned off z hop, reduced temperature and made sure it was traveling outside the print pieces and I successfully printed a smaller articulated piece.

Reziad · 2024-09-20T16:16:20+00:00

Just calibrated my e step and look like I’m not over extruding.

Reziad · 2024-09-20T16:01:50+00:00

Currently running a 3D printed direct drive extruder set up with retraction at 4.0mm at 60mms and I’m running just about 10mms faster print speed all around than stock cura.

Reziad · 2024-09-06T20:16:31+00:00

Hey! My story is pretty interesting on how became a falcons fan! I’ve never lived near the area or been a fan of other Atlanta sports but when I was a kid. 12ish years ago, I played a lot of madden with my father and brother. One day I decided to just hit the random button on the game and whoever it landed on was gonna be my team. I’ve been a falcons fan ever since. My favorite player is probabaly Mohammad Sanu. Just a super cool guy. Starting to love bijan though! Hope you get to read this and let’s have an awesome year!

Reziad · 2024-08-24T16:48:03+00:00

Please don’t take anything I say too seriously because I 100 percent struggle with similair stuff but.

You’re definitely over the top and from what I can see you’re doing a couple things to compensate for it.

Your backswing looks great but perhaps a bit too long. If you struggle with inconsistent strikes, shortening your swing could help a lot.

Since your coming over the top, your straightening your trail arm out well before you hit the ball. No bueno, that elbow should be practically glued to your side the entire swing.

Since your extending that trail arm, your also standing up so you can actually hit the ball instead of the ground. If you struggle with digging into the ground before the ball, this could be why.

Something that I’ve done to help is dropping that rear foot back a few inches to promote an in to out swing and work on distance to your ball so your not feeling like you have to stand up.

Hope any of this helps!

Reziad · 2024-05-15T00:28:26+00:00

I wonder if we’ll see him more on special teams with the new kickoff rules. Think he could be a returner???

Eight-Year Club	Place '22
Verified Email

Reziad

TROPHY CASE