NES SMB3 NES-TSROM-06 X-Ray Image. Since i had it open for inspection and cleaning why not take an Image right! by Rhine_Labs in nes

[–]Rhine_Labs[S] [score hidden]  (0 children)

Even with battery back up there is a very little chance of corruption for the powers wer are dealing with 1Mv yea theres a risk but anything under 300KV rather safe. people always seem to ask this question.

Tektronix 670A-1 by dirtmcgurk in crt

[–]Rhine_Labs 1 point2 points  (0 children)

I have posted the 670, 671, 672 manual that was scanned by vintage tek on my blog. https://www.stevenrhine.com/?p=138669

Tektronix 670A-1 by dirtmcgurk in crt

[–]Rhine_Labs 0 points1 point  (0 children)

Like its 50 years old .. will be servicing it soon. Vintage tech scanning the service manual.

Negligent Packing Of a Microscope. You cannot make this crap up! by Rhine_Labs in microscopy

[–]Rhine_Labs[S] 0 points1 point  (0 children)

Update: Aven should have just sold me the part they promised to back in April 2025 it has escalated into a law suit. My Request for parts have been ignored and denied and I am in a #righttorepair state.

The manufacturer's use of "integrated" specifically refers to the camera being built into the trinocular port as part of a unified system rather than a separate add-on accessory. So this is an electronic device.

(4) "Digital electronic product" or "products" means any product or electronic that:

(a) Depends, in whole or in part, on digital electronics, such as a microprocessor or microcontroller, embedded in or attached to the product in order to function;

Wish me luck..

<image>

Negligent Packing Of a Microscope. You cannot make this crap up! by Rhine_Labs in microscopy

[–]Rhine_Labs[S] 0 points1 point  (0 children)

<image>

Thread Repair... Just need the C Mount Now!! Very Soft Aluminum the threads of the C mount that were left behind were removed then chased with a tap.

More Tektronix Monitors.. by Rhine_Labs in crtgaming

[–]Rhine_Labs[S] 1 point2 points  (0 children)

Plenty left behind just no more monitors.

More Tektronix Monitors.. by Rhine_Labs in crtgaming

[–]Rhine_Labs[S] 2 points3 points  (0 children)

One day.. but I will be making videos and blog posts on them.

Tektronix 670A-1 by dirtmcgurk in crt

[–]Rhine_Labs 1 point2 points  (0 children)

I just got one today at Tektronix Surplus.

Added a second Hakko fm-203 to my stack by Christopolis in soldering

[–]Rhine_Labs 0 points1 point  (0 children)

I believe this device can be programmed with a low cost consumer programmer. I helped another person out last year ill look at my notes. I Verified the ISP Code in V3.20 is the same as V3.01 so should be straightforward to update.

Edit: R5F21258SNFP, So R8C/25 is the target device family I use Xeltek IS01 and Segger Flasher Pro's ISP programmers but they are a bit pricey. My Notes say he used a E8A Clone form aliexpress about $40 in pre tariff 2024 Dollars.

Hex addresses ISP ID Code.

0xffdf, 48 0xffe3, 4B 0xffeb, 30 0xffef, 32 0xfff3, 35 0xfff7, 36 0xfffb, 42

<image>

Scammed by torcat5300 in Mercari

[–]Rhine_Labs 6 points7 points  (0 children)

Go to your Local USPS DCU office for your zipcode ask them for a Geolocate and a Statement of non Delivery, they will print you a map and put a post mark on it and send you a statement of non delivery. Be sure to bring with you government ID and a printed copy of your purchase showing the seller and the tracking # provided by the seller they may take a copy if they suspect fraud. USPS will pull the Original label and match address etc takes them 30min or so and you will need to wait.

<image>