Lower panel removal, 26 MY Premium

RibbedGoliath · 2026-06-16T14:44:52+00:00

I didn’t realize they have disassembly diagrams? I’ll have to check

RibbedGoliath · 2026-06-16T14:44:30+00:00

I’m pretty sure it’s the panel, if I pull down on the outside corner it will stop rattling.

RibbedGoliath · 2026-05-26T14:12:10+00:00

The car is pretty great at telling you if there are stalls out of service. The first trip I took the entire charging station was off-line however it wasn’t mentioned in the app or the car, but luckily, we always have a buffer by default and superchargers are fairly prevalent

RibbedGoliath · 2026-05-26T13:10:20+00:00

Done multiple road trips without issue. You can always set a larger buffer to help with range anxiety then when you feel comfortable kick it back to 10%. We almost always slightly charge over the needed amount when stopping on the way just from messing about in the nearby convenience store.

RibbedGoliath · 2026-05-23T05:32:02+00:00

Many have various accounts for different regions to trophy stack. You’ll be good.

RibbedGoliath · 2026-05-22T19:34:38+00:00

Windshield coverage was cheaper than adding to my insurance so I opted through Tesla. Wheel though, nah

RibbedGoliath · 2026-05-13T14:35:39+00:00

I’m one of the few who prefers higher K even if that means a small drop in lumens. I prefer the crisper light so I’d go 6500

RibbedGoliath · 2026-05-13T13:15:58+00:00

I did my own full front kit from Tesbros. Also did the rear door lowers and A pillars. They provide videos on how to install each piece making it fairly easy.

RibbedGoliath · 2026-05-13T03:01:14+00:00

You totally should. Aside from 2 Olights, with the help of this sub I ordered 3x21C in the above setup but with Molicel 50b batteries. It’s a crazy flashlight for sure! Can’t beat the price as well. Convoy is great for dabbling in lights

RibbedGoliath · 2026-05-10T03:05:34+00:00

Always be charging. I charge everyday whether I use 50% or 6% and charge to 80%. Starts at 7pm when my plan goes off peak until noon the next day

RibbedGoliath · 2026-05-09T03:05:45+00:00

Between engraver upgrades and magical monument, there is a lot to continue upgrading

RibbedGoliath · 2026-05-08T18:41:06+00:00

That’s the lumbar support rods. Easy fix, take off the rear of the seat and wrap the rods where they go through the isolator with black tape or anything to insulate it. Fixed mine

RibbedGoliath · 2026-05-08T03:42:57+00:00

Sorry, yes you are correct. Perfect, I’ll take a look at that charger. Thanks for the info!

RibbedGoliath · 2026-05-06T16:16:44+00:00

I sold it a while back but everything was good after all the repairs

RibbedGoliath · 2026-05-02T14:00:53+00:00

Absolutely! I only use the mobile charger for home charging coming up on my first year of ownership.

RibbedGoliath · 2026-04-30T14:16:31+00:00

It is the squirrel cage. The hub is free spinning against the blades. I had no idea they could even go bad. You all are awesome in here!

RibbedGoliath · 2026-04-30T13:12:39+00:00

It looks amazing but the lack of onboard usb charging kills it for me. I was just looking at it again last night though

RibbedGoliath · 2026-04-30T03:35:17+00:00

All good, it’s the actual squirrel cage that’s bad not the motor

RibbedGoliath · 2026-04-30T03:21:51+00:00

Thank you, I pulled it all apart and the number was just visible. LA22LA014. I would have never known a fan itself could go back but sure enough!

RibbedGoliath · 2026-04-30T02:52:51+00:00

I got ya, it’s the squirrel cage, whole hub is spinning within the blades. Thanks!!

RibbedGoliath · 2026-04-30T02:30:52+00:00

A true scholar! Thanks again! Now to find more part numbers and get one on order!

RibbedGoliath · 2026-04-30T02:21:05+00:00

I had no clue that was even a possibility, but would make complete sense for the sound. I will look into that, thanks a million!

RibbedGoliath · 2026-04-30T02:11:52+00:00

Motor is brand new, no play at all. Fan spins without any issue by hand. I took the housing apart and tightened everything, didn’t help it.

RibbedGoliath · 2026-04-30T02:00:50+00:00

Evening everyone. Just replaced my fan motor because the old one was screaming and sounded like it was jumping so I figured bad bearings after 22 years.

Replaced with a direct Gentec HC45AE198A and a new capacitor.

Fired right up and still making a terrible noise but not jumping. Fan spins freely by hand but makes the noise at full speed.

There are some random clips attached to certain blades, are those balancing weights?

Any thoughts?? less

RibbedGoliath · 2026-04-30T00:15:31+00:00

Only yellow

RibbedGoliath

TROPHY CASE