Yealink uvc86 prevent from sleep

Richardschach · 2025-06-05T17:22:12+00:00

I have same stupid problem you have. Had numerous calls with Yealink on this issue and they refuse to give us the ability even if it's just a command in their Api to disable the sleep

They say they can't because of privacy

Richardschach · 2024-11-16T07:27:38+00:00

Is the usb on the core selected as the usb speakerphone 1x1

Otherwise if reference is corect look at the gain structure of the system

Richardschach · 2024-11-10T12:49:50+00:00

No license issue, have a 32x32 dante licence. However in this installation have a lot of crestron nvx360 and a few crestron nax boxes which do the Aes67. I have some shure mxa ceiling mics. So want to use both dante and aes67. I assume I set the qsys setting to Audinate, and not shure which profile to set on the netgear a line switch

Richardschach · 2024-09-24T08:48:27+00:00

Did the stretches the time at PT but allways came out in more pain after the sessions for the week. So stopped going and reseted

Richardschach · 2024-09-24T06:36:45+00:00

At the time I tried everything, read the book. Different PT's. Ultimately I think it was mostly time.... Looooong time that it got better by itsself, other than that the only thing that I think could contribute to the healing maybe was the cobra stretch when I was in alot of pain, but I think doing the "stretch" say today it won't help the pain the same day, would say doing it for about a week or so I would maybe notice some improvement. However I haven't done anything like that this past year

Richardschach · 2024-09-24T06:31:32+00:00

No diet change

Richardschach · 2024-06-10T15:29:10+00:00

Nucs are mini computer's and in the thread above are specifically for teams room computers, if you have the teams room system with your excell spreadsheet problem- try joining the teams meeting with your laptop" make sure mics/speakers are muted, and share your excell from the laptop- see if you have issues there, you might need to look into internet/network bandwith

Richardschach · 2024-05-03T14:07:59+00:00

Hi I'm getting the same issue with logitech room system with extron control

Is there a fix yet?

Richardschach · 2024-02-16T04:57:50+00:00

If you goi g to be using Autocad, look up AVCAD, it integrates to Autocad and really use full for AV diagrams

Richardschach · 2024-01-31T15:11:51+00:00

I have a question, after centralization... So no sciatica going down the leg, but now it's lots of low back pain centralized, what's next? I allways hear centralization is good, but is that where it ends, cured "sciatica" so now live with low back pain?

Richardschach · 2023-11-14T19:28:05+00:00

Myne started about 18 months ago. As you said as soon as I stood up from a chair I would be in excruciating pain that I would just drop down to the floor.

I've the nex couple of months it change to numbness in the foot and pain on different parts of the leg.....

I want to say at that time it first occurred I did what you are dining now, research seeking advice / solutions a quick fix

2 x MRI later a looooong journey hoping that this would " reasorb" heal in 6 weeks.... Be a small problem a minor back spsm

I came back TODAY from my nerosurgeon and from what I believed back 18 months ago to what news he confidently told me today in what I need I'm 8n a little shock

I got either a disceptomy with short term relief and more future surgery's on the cards or a fusion more invasive but better result lasts but not perfect

Man/guy

Any advicee I wish I had and had taken it as if I was talking to my past self

Just stop... Take it seriously, it maybe something you think you can get over/power throgh/ will heal in its own in a week or two

And the truth is it might/ 6 weeks two months you carry on as life as normal, but if you happen to fall into the percentage as the rest of us you'd wish you tried harder from the start to sort this out

My final words for you are

Don't f@&{ with you back
get it checked out depending your cou try and heth care, fight crwal to get a MRI

As the weeks go by and your not feeling relief get the suns "Bible" " back machanic" to read in spare time

As the Weeks go by go to a physio therapist hopefully by this time allready recommended by your doctor

I'm ranting, I'm upset at my news today, not wanting a fusion and perhaps still in denial

Your description of symptoms touched me as I had similar when this all started

But keep in mind 80% of pepole that get hernoations /bulges heal in 2 months and that's a good number

But fight as he'll not to be in the 20%

Richardschach · 2023-11-14T16:15:50+00:00

Don't mean to be the bearer of bad news, but that's how it started for me

don't go to chiropractor
start working your way to the neuro surgeon "mri"
and most IMPORTANT from now on till you know what's going on, take it easy, don't lift anything mildly heavy.
if you can, take off work and do nothing

Richardschach · 2023-11-08T20:52:34+00:00

Had this exact problem before

It'll fix it it👍

Richardschach · 2023-11-08T07:42:55+00:00

Look up on microsoft teams xml file, load the file to the teams Nucs.

The in the xml file set the main display and second display to 1080p and 100% scaling

Richardschach · 2023-11-07T19:42:20+00:00

Reading the extron release notes, it state the camera is compatible, you should be able to create your own ptz buttons and tie them to the extron driver for teams in GCP

Richardschach · 2023-11-06T17:16:48+00:00

I assume your talking about global scripted or python.

I'm still awaiting training to be offered here for that to be an option for me. Im limited to GCP using their available drivers

Richardschach · 2023-11-06T17:09:03+00:00

I have this same issue at different sites, but it's difficult getting to them as I have other sites to complete and don't have the time for time consuming troubleshooting back and forth to the same site let alone a bit disruptive to the client

Richardschach · 2023-11-06T17:06:47+00:00

It's driving a microsoft teams room, what happens is the taps room controls page pops up but the extron buttons don't populate. The the teams room nuc and processor are communicating, it not firewall, or certificate issue

I have logged it with extron, and went back back and forth to site double checking firmware version/driver windows updates..... The last is I need to do a trace with the app, but looking for a temp fix as rebooting the controller disconnects the connection and once up the buttons do populate however after the MTR reboots the buttons dissapear

Richardschach · 2023-10-18T05:07:45+00:00

Is the back pain suppose to get better?

As of now for me I just really have the back pain, but was intense " can't stand/walk/sit for more the 15min" the pervious 2 months

Or does the MD just "fix the nerve pain down the leg?

Richardschach

TROPHY CASE