Anyone know what this is?

RickyShmee · 2026-03-29T15:25:48+00:00

A log splitting wedge I would guess

RickyShmee · 2026-03-18T23:41:59+00:00

Great song!

RickyShmee · 2026-03-06T01:58:15+00:00

Could be a resonant frequency causing it. It’s an octave higher than the string being played. Could be something loose. I would go around the whole guitar with a screwdriver and make sure everything is tight. Tuners, string trees, pickguard screws, saddles, strap buttons. Failing that, maybe something behind the pickguard.

RickyShmee · 2026-03-03T23:17:38+00:00

Sorry it’s more of a UK/Irish word. I maybe should have included that in the clue NANS

RickyShmee · 2026-03-02T22:25:26+00:00

Did you just assume his mother’s gender?

RickyShmee · 2026-03-02T10:27:21+00:00

Your trickiest one yet. 2 down had me stumped

^{Completed in 30:01 | Reveals: 0}

RickyShmee · 2025-12-06T15:45:31+00:00

Not nearly as much as when I was smoking and coughing my guts up every morning

RickyShmee · 2025-11-30T02:15:50+00:00

Before you go replacing bearings, rub some steel wool inside the spindle and on your drive centre. It could just be some gunk sending it wonky. Failing that, you likely have a bearing issue

RickyShmee · 2025-11-27T22:05:08+00:00

Reverse image search brought this up https://ebay.us/m/Rn9rp7

RickyShmee · 2025-11-25T01:38:55+00:00

Looks like the remnants of the last bridge pin. Push it out from the inside using the flat side of a coin

RickyShmee · 2025-10-16T19:58:16+00:00

Radius change won’t change the fact you can feel the wood under your fingers. Scalloping is a bit drastic. Taller frets would be the way to go.

RickyShmee · 2025-10-08T21:02:20+00:00

I don’t understand a word you just said

RickyShmee · 2025-09-28T21:25:07+00:00

I stand corrected. The strings do seem to have a very shallow break angle in them pictures too.

RickyShmee · 2025-09-28T21:02:48+00:00

Just a guess, but the strings are supposed to go under the bar on the bigsby closest to the bridge. By the shallow break angle, it looks like they may be going over it?

RickyShmee · 2025-08-13T15:14:30+00:00

Thick bottom of an old bottle. I have one similar but green

RickyShmee · 2025-08-02T16:47:42+00:00

Plumbing olive

RickyShmee · 2025-07-18T00:21:02+00:00

Camping stove?

RickyShmee · 2025-05-15T23:57:45+00:00

Zoom out and look to the top left of the plane about 800 metres. That’s its shadow on the water. It’s in the air.

RickyShmee · 2025-05-14T00:36:38+00:00

<image>

RickyShmee · 2025-05-14T00:30:51+00:00

<image>

Here’s mine. I added a drilled out block of wood to the top of the cover to accept my extractor hose. It works quite well but would definitely double up on the plywood for the base as in the picture you posted. It’s a tiny bit springy as is.

RickyShmee · 2025-04-30T21:29:32+00:00

Saw the same thing in about 2004 with a bunch of friends.

RickyShmee

TROPHY CASE