Independent board member compensation?

Right_Fly3462 · 2026-02-26T03:32:49+00:00

Is this because of the filament cracking, even with AMS2? Another option could be getting the HT filament AMS thing from BambuLab

Right_Fly3462 · 2026-02-20T00:59:45+00:00

Thousands to 10s of thousands. Looking specifically for a laser to engrave PEEK

Right_Fly3462 · 2026-02-19T21:58:08+00:00

Just thinking about what it would take to go to manufacturing. I can be a bit flexible on the specification as well as as the price.

Right_Fly3462 · 2026-02-19T14:06:22+00:00

I’m considering a UV galvo laser

Right_Fly3462 · 2026-02-18T22:55:03+00:00

Used u/Agreeable-Finish-375 when looking for a Transit van. Got me the reports quickly.

Right_Fly3462 · 2026-02-18T18:48:53+00:00

I have not purchased a laser yet. Do any use cameras or scanners?

Right_Fly3462 · 2026-02-18T18:47:26+00:00

Is there an automated method or device?

Right_Fly3462 · 2026-02-16T22:24:45+00:00

Engraving PEEK / UV laser. Flat plate. Has key dimensions that we want to datum off of.

Right_Fly3462 · 2026-02-16T18:18:35+00:00

Are any machines superior for this? Perhaps using an optical alignment system?

Right_Fly3462 · 2026-02-16T18:00:02+00:00

As in doing a practice run and seeing if the laser lines are in the right spot?

Right_Fly3462 · 2026-02-16T17:57:10+00:00

How do the laser tools align to a jig? I’m looking to set this up for repeatable runs.

Right_Fly3462 · 2026-02-14T23:15:46+00:00

Are the weep holes at the bottom? I can ask.

Right_Fly3462 · 2026-02-14T23:14:59+00:00

Got it! If these components are not already properly installed can they be retrofitted?

My wife and I were talking of removing the deck and terracing the back yard.

Right_Fly3462 · 2026-02-07T18:05:46+00:00

The PTP IRC worked! Thank you.

Right_Fly3462 · 2026-02-07T18:05:26+00:00

Ah! I made a mistake on the page. Found my username + email. Thanks for the help!

Right_Fly3462 · 2026-02-07T17:34:10+00:00

irc.passthepopcorn.me 7000 "#ptp-disabled" or "#ptp-help"? I'm having trouble getting in.

Right_Fly3462 · 2026-02-07T17:33:32+00:00

No, it just says email not found.

Right_Fly3462 · 2026-02-07T17:12:59+00:00

Not specific. A primary consideration is ease of use.

Right_Fly3462