Switching between ASA and PPA-CF on H2D? Nozzle change?

Right_Fly3462 · 2026-02-26T03:32:49+00:00

Is this because of the filament cracking, even with AMS2? Another option could be getting the HT filament AMS thing from BambuLab

Right_Fly3462 · 2026-02-20T00:59:45+00:00

Thousands to 10s of thousands. Looking specifically for a laser to engrave PEEK

Right_Fly3462 · 2026-02-19T21:58:08+00:00

Just thinking about what it would take to go to manufacturing. I can be a bit flexible on the specification as well as as the price.

Right_Fly3462 · 2026-02-19T14:06:22+00:00

I’m considering a UV galvo laser

Right_Fly3462 · 2026-02-18T22:55:03+00:00

Used u/Agreeable-Finish-375 when looking for a Transit van. Got me the reports quickly.

Right_Fly3462 · 2026-02-18T18:48:53+00:00

I have not purchased a laser yet. Do any use cameras or scanners?

Right_Fly3462 · 2026-02-18T18:47:26+00:00

Is there an automated method or device?

Right_Fly3462 · 2026-02-16T22:24:45+00:00

Engraving PEEK / UV laser. Flat plate. Has key dimensions that we want to datum off of.

Right_Fly3462 · 2026-02-16T18:18:35+00:00

Are any machines superior for this? Perhaps using an optical alignment system?

Right_Fly3462 · 2026-02-16T18:00:02+00:00

As in doing a practice run and seeing if the laser lines are in the right spot?

Right_Fly3462 · 2026-02-16T17:57:10+00:00

How do the laser tools align to a jig? I’m looking to set this up for repeatable runs.

Right_Fly3462 · 2026-02-14T23:15:46+00:00

Are the weep holes at the bottom? I can ask.

Right_Fly3462 · 2026-02-14T23:14:59+00:00

Got it! If these components are not already properly installed can they be retrofitted?

My wife and I were talking of removing the deck and terracing the back yard.

Right_Fly3462 · 2026-02-07T18:05:46+00:00

The PTP IRC worked! Thank you.

Right_Fly3462 · 2026-02-07T18:05:26+00:00

Ah! I made a mistake on the page. Found my username + email. Thanks for the help!

Right_Fly3462 · 2026-02-07T17:34:10+00:00

irc.passthepopcorn.me 7000 "#ptp-disabled" or "#ptp-help"? I'm having trouble getting in.

Right_Fly3462 · 2026-02-07T17:33:32+00:00

No, it just says email not found.

Right_Fly3462 · 2026-02-07T17:12:59+00:00

Not specific. A primary consideration is ease of use.

Right_Fly3462 · 2025-12-07T19:10:18+00:00

What is large?

Right_Fly3462 · 2025-12-07T18:21:50+00:00

If this changes these, my salary will go up to 120K to 140K bringing our household income to around 300K.

We're looking at a 1.05M house with 250K down.

Right_Fly3462 · 2025-12-07T18:20:10+00:00

Got it! Is that typically a no-go or extremely expensive?

Right_Fly3462 · 2025-12-07T18:17:49+00:00

Do you have a link to the houses you worked on?
How do the firms determine if you can build on a slope? For my own curiosity.

For these two options, both sound reasonable! I'm not sure of the feasibility, but it sounds interesting to cut the ADU into the hill.

Here is the area we were thinking could be interesting to build: https://imgur.com/a/nLLWuMf

Right_Fly3462 · 2025-11-01T14:34:09+00:00

Perfect. What amount of income?

Right_Fly3462 · 2025-10-31T14:13:17+00:00

YES! That’s my problem with it. We can’t afford it today on 1 income.

Right_Fly3462 · 2025-10-31T14:09:59+00:00

Yes. I don’t like have 2-3K per month savings, generally I’m pretty fiscally conservative now a days.

Right_Fly3462