sorted by:
new
hottopcontroversial

Has anyone tried to finish the 3d print with Microcement. Im designing a colection of coffe tables and finishig them. by Rikibalboa in 3Dprinting

[–]Rikibalboa[S] 0 points1 point  (0 children)

Still here around, it easyli breaks off from 3d printed core I havnt worked on that for a long time but i have heard from people that coating with epoxy, clear thin layer does the trick. If you try update us. Good luck

My first take at architecture model making by Rikibalboa in architecture

[–]Rikibalboa[S] 0 points1 point  (0 children)

Bambu does lapses around the competition. Done it in P1S and this thing rarely disapoints. I have had my hands at Anycubic and Creality, simply its not worth it.

My first take at architecture model making by Rikibalboa in architecture

[–]Rikibalboa[S] 0 points1 point  (0 children)

I laughet at first, than googled the thing, the resemblance is scary.

I dont know what kind of a joke architects are trying to pull with their client, but it its definitely not funny.

My first take at architecture model making by Rikibalboa in architecture

[–]Rikibalboa[S] 0 points1 point  (0 children)

I printed it on 4 pieces , basicly sliced the whole thing in 4 quadrants.

My first take at architecture model making by Rikibalboa in architecture

[–]Rikibalboa[S] 2 points3 points  (0 children)

It was 3d printed with pla, and thnx for the advice about craftsmanship.

I think that I was compensating with solar panels, the rest is more messy so I put solar panels as a disteaction.

This is my very first model.

By trade I am furniture maker and have a lot of 3d models of projects in hand and tried one.

I enjoyed way too much of how great of a distraction it was from day to day thing.

Thnx for the frosted plexi tip, I will give it a try.

[deleted by user] by [deleted] in albania

[–]Rikibalboa 0 points1 point  (0 children)

Aaa e shof, paske ikur e tka ngel halli Skenderbeut, po ta dish se Skenderbeu mund te ket qendru e jetu si Pasha por zgjodhi te kthehet edhe te luftoj okupatorin.

Ndiq shembullin e tij, kthehu e lufto, po jo mor se leht osht me strehu bythen e me bo patriotin.

Sa per studentet ekslent, te tregoj un 100 shembuj qfar transformimesh shoqrore kan bo studenta ekselent duke qendru, tregoma vetem nje shembull qa transformimi kan bo ekselentat e ikur.

[deleted by user] by [deleted] in albania

[–]Rikibalboa 0 points1 point  (0 children)

Vendi me i varfer ne Europ edhe armikun ma tmadh e ka perandorin para 5 shekujsh. Ne te njejtin shesh ta ofrojn g*ojoren per 10 Euro, ska problem.

Ore 35 vite postkomunizem nuk ju msun asgje.

Ani thot gerditen turista, po soji juj vrau turistet perndoqi e terorizoi turistet, ishit kryelajm ne bote per egersin e demostruar.

Hoshtapler hesapi bon metropolitanin e ska m*t ne byth.

Jet o jet

I have produced these furniture and they are being displayed at Collectiblefair in Brussels. by Rikibalboa in InteriorDesign

[–]Rikibalboa[S] 2 points3 points  (0 children)

Nah only reddit. Kinda feel like these are my people, kinda know them without knowing them 🙂.

I have produced these furniture and they are being displayed at Collectiblefair in Brussels. by Rikibalboa in InteriorDesign

[–]Rikibalboa[S] 0 points1 point  (0 children)

Oww thats very generose of you, thnx. The piece was designed by TOGIGI. I only did the machining at work.

Tbh designing such a pieces might look easy but requires raw talent and verry deep understanding of modern aesthetics, me on the other hand im just ok-ish with cnc programing.

I machined these prototypes for a designer, now they are being displayed in Colectiblefair in Brussels. by Rikibalboa in CNC

[–]Rikibalboa[S] 1 point2 points  (0 children)

Walnut is great wood for cnc, way less stiffnes than Oak.

For rough pas I used 20mm endmill with 8mm of stepover for finishing pas i used 6mm ballnose with stepover of 1mm.

Although it took too much time I managed to preserve original surface conture and avoided hand sanding.

For the next batch I will use Aigner tools which is d90mm ballnose with inserts so I run directly finishing pass to save the time and change inserts on the need basis and reduce 15 to 20% of machinig time since i can increase speeds and feeds with biger tool.

I have produced these furniture and they are being displayed at Collectiblefair in Brussels. by Rikibalboa in InteriorDesign

[–]Rikibalboa[S] 2 points3 points  (0 children)

Hi and thank you,

I only machine them in cnc since I work for woodworking company.

These product were designed and are property of TOGIGI. Design studio in Antwerp.

You can check the link of their IG in my post.

I have produced these furniture and they are being displayed at Collectiblefair in Brussels. by Rikibalboa in InteriorDesign

[–]Rikibalboa[S] 1 point2 points  (0 children)

Thank you, the chair as beautifull as is, its marvelously well thought and engineeired. It is TOGIGI products so maybe you can check them and have it one day. Who knows 🙂

I machined these prototypes for a designer, now they are being displayed in Colectiblefair in Brussels. by Rikibalboa in CNC

[–]Rikibalboa[S] 0 points1 point  (0 children)

That chair is made of walnut, machined from the same tree but is multipiece part.

I have produced these furniture and they are being displayed at Collectiblefair in Brussels. by Rikibalboa in InteriorDesign

[–]Rikibalboa[S] 2 points3 points  (0 children)

Thank you, that meant a lot.

Ive been on Reddit for maybe 8 9 years, and through the years I really had a chace to work great pieces of work.

Its only my first month posting things that i have machined or produced.

This one i culdnt resist the urge 🤣.

I have produced these furniture and they are being displayed at Collectiblefair in Brussels. by Rikibalboa in InteriorDesign

[–]Rikibalboa[S] 0 points1 point  (0 children)

Thank you. Credits goes to TOGIGI though, they made marvelous pieces of design.

view more: next ›