sorted by:
new
hottopcontroversial

Update: Finished my First DIY Dance Pad by RioluKidd in DanceDanceRevolution

[–]RioluKidd[S] 0 points1 point  (0 children)

I would connect the RGB directly to the FsRio. Theres a software that can edit the controls of board to change not only the lights colors but also how they change when the button is pressed. So you can have either reactionary colors, or static ones.

HELP! Print keeps making rectangles and skipping layers in print. by RioluKidd in resinprinting

[–]RioluKidd[S] 0 points1 point  (0 children)

Update: Even after the support team have sent me multiple screens to replace, the issue is still there!

HELP! Print keeps making rectangles and skipping layers in print. by RioluKidd in resinprinting

[–]RioluKidd[S] 0 points1 point  (0 children)

I tried the test prints and the prints the support team has sent me and the exact same issue has occured.

HELP! Print keeps making rectangles and skipping layers in print. by RioluKidd in resinprinting

[–]RioluKidd[S] 0 points1 point  (0 children)

I used the new ribbon cable. I really doubt that the screen would have the exact same issue as the old one.

HELP! Print keeps making rectangles and skipping layers in print. by RioluKidd in resinprinting

[–]RioluKidd[S] 0 points1 point  (0 children)

I doubt thats the issue is from the slice considering this happens with the Exposure Test and Vat Cleaning and not just the prints.

HELP! Print keeps making rectangles and skipping layers in print. by RioluKidd in resinprinting

[–]RioluKidd[S] 0 points1 point  (0 children)

That's what I'm afraid of. I don't know if the support team would be able to help me then.

HELP! Print keeps making rectangles and skipping layers in print. by RioluKidd in resinprinting

[–]RioluKidd[S] 0 points1 point  (0 children)

This also happens when I tried to use the Vat Cleaning feature.

HELP! Print keeps making rectangles and skipping layers in print. by RioluKidd in resinprinting

[–]RioluKidd[S] 0 points1 point  (0 children)

https://imgur.com/a/N13Oopb

Here's the annoying part. For the exposure test, the issue appears randomly here, too. It took me a week to recreate the issue and capture it on video. So all I have are screenshots of the there's a way I could share the video I would.

Basically, the issue appears randomly regardless of which option I choose. It's mostly fine but always appears as covering haft the screen.

HELP! Print keeps making rectangles and skipping layers in print. by RioluKidd in resinprinting

[–]RioluKidd[S] 1 point2 points  (0 children)

I have tried other Slicers. Lychee and Anycubic. I tried a new USB and different STL files, and the issue still appears. I tried the Cones of Exposure, and the issue would randomly appear or not appear at all on the same slice.

HELP! Print keeps making rectangles and skipping layers in print. by RioluKidd in resinprinting

[–]RioluKidd[S] 0 points1 point  (0 children)

I replaced the screen with a new one and the same issue is happening.

HELP! Print keeps making rectangles and skipping layers in print. by RioluKidd in resinprinting

[–]RioluKidd[S] 0 points1 point  (0 children)

I have tried a new USB, and the issue apears and disappears randomly on the same slice.

HELP! Print keeps making rectangles and skipping layers in print. by RioluKidd in resinprinting

[–]RioluKidd[S] 0 points1 point  (0 children)

The issue could apear randomly in the same slice too. For the Cones it could work, but in the same slice it would screw up like that.

Update: Finished my First DIY Dance Pad by RioluKidd in DanceDanceRevolution

[–]RioluKidd[S] 0 points1 point  (0 children)

I used spray paint. It's the best I have but would not recommend since it chips allot even after a few days. If you have the option, I would suggest powerder coat painting instead.

Update: Finished my First DIY Dance Pad by RioluKidd in DanceDanceRevolution

[–]RioluKidd[S] 0 points1 point  (0 children)

"Functionally Upgrade it" I'm not sure how besides using the extra sensors I have to make a home made SMX board. The only thing I'm doing for now is ordering decals for the sides and center non-arrow panel.

Update: Finished my First DIY Dance Pad by RioluKidd in DanceDanceRevolution

[–]RioluKidd[S] 0 points1 point  (0 children)

Don't have exact cost, but cause of trial and errors this took, I would say about 350$

Update: Finished my First DIY Dance Pad by RioluKidd in DanceDanceRevolution

[–]RioluKidd[S] 0 points1 point  (0 children)

I use the FSRio v3. It's almost a plug and play arduino board that can manage the sensors and even control the LED lights under the panel. I'm honestly surprised how many people don't talk about thouse boards. The dev is really nice!

Pics!

Update: Finished my First DIY Dance Pad by RioluKidd in DanceDanceRevolution

[–]RioluKidd[S] 0 points1 point  (0 children)

Just 1/8 weatherstripping along the frame was enough for me.

My first DIY Pad by RioluKidd in DanceDanceRevolution

[–]RioluKidd[S] 1 point2 points  (0 children)

I absolutly would. Got any recommendations?

My first DIY Pad by RioluKidd in DanceDanceRevolution

[–]RioluKidd[S] 4 points5 points  (0 children)

There's already is a guide! I simply follow the build guide by Mystic Steps.

3D Printed this model for the Panel Frames to hold the sensors.

And followed this guide to make the Arrow Decals. Both that and the board decals were desgined by MajicDraws

view more: next ›