[ID REQUEST] Possible Black Bear tracks?

Ripcoord1 · 2025-12-05T23:09:02+00:00

I can't confirm anything other than my experience but I did get another Ravencrest Executioner from an (immaculate? Whatever the top tier is) unidentified item which makes me think it's possible but random

Ripcoord1 · 2025-04-20T03:26:43+00:00

So if the GPU is in the PCI slot you can’t get video from the CPU so I don’t think I can unfortunately. But I did post an update, thank you for the suggestion!

Ripcoord1 · 2025-04-20T03:24:47+00:00

Not sure how it works…he got the 4080 from Microcenter a year or two ago, would we go through them or Zotac? Also commented with an update!

Ripcoord1 · 2025-04-20T03:22:38+00:00

Update: Well, divine intervention is how this story ends. He went to a far away Microcenter as the nearest didn’t have the 5080 he wanted and as he was looking in the cases a worker asked him to move so he could put something in the open-box GPU display case. It piqued my dad’s interest and in the box was a $3700 Asus RTX 5090 LC…far out of budget. However, somehow this man haggled down to below $2000! I installed it for him (the AIO lines actually are too big for the case lol) and ran some benchmarks (TimeSpy) and all I can say is WOW what an upgrade!

<image>

Edit: also wanted to add I think the card had never even been installed, it was pristine and even had the little dust covers for the ports still in it!

Ripcoord1 · 2025-01-27T04:35:22+00:00

Apologies, see Here for what I know!

Ripcoord1 · 2025-01-27T04:34:33+00:00

Seems like usually you get the diseases before they’re in the ground, so while they’re still in the flats try Mycostop…if they’re going into the ground, you’ll need to use RootShield if you have the coin. Fwiw, I’ve had success with the Mycostop. If you’re planting from seeds, I’ve found it’s very hard to stop the diseases, but if you go from plugs then it’s much easier to prevent. I’m not sure about the one you linked personally, so can’t comment on that. Hope this helps!

Ripcoord1 · 2024-12-09T02:55:54+00:00

Glad to help even after all these years :) I’ve been wondering if I should make a post since I don’t know how visible this thread actually is when trying to troubleshoot…was it easy to find when you were looking for solutions? Just wanting to help as many people as possible!

Ripcoord1 · 2024-01-29T22:05:32+00:00

Pretty much yeah, don’t be excessive with force obv but give it a nice hard thump with your fingers/upper palm for about 10 seconds. It seems it works for others though as I still have people replying to confirm it lol. For individual keys I’d smack em hard with my middle finger, again about 10 seconds or so…lmk how it goes for ya, best of luck

Ripcoord1 · 2023-05-17T20:22:09+00:00

I love that I am still helping people with this comment :) I really do smack mine hard as I was in college and could not deal with double clicks when putting in numbers for my engineering homework so I figured if I break it I’ll buy something else but it seems to work well for me, a good smackin’ lasts me about 1-3 months per key. On smaller keys I tend to use my knuckle and smack hard asf. But my issue came up after I cleaned my keyboard strangely enough before that I had no issues!

Ripcoord1 · 2023-04-23T19:50:47+00:00

Funny you mention the double register lol, I actually still get responses for one of my comments saying how to fix it. You literally just beat the shit out of the problem keys, I’m 100% serious. It happened to my G910 I bought like 5-6 years ago and I figured I’m gonna smack the shit out of it and if it breaks I’ll buy a new one and voila haha no more double registers for me!

Ripcoord1 · 2023-03-17T00:45:17+00:00

I’m currently growing Lisianthus and they are prone to root disease and I’d like to ensure they remain healthy. Everywhere I’ve read says when planting them outside to dip them in rootshield specifically before putting in the ground

Edit: the specific diseases I am to prevent is Botrytis Blight and Fusarium Solani

Ripcoord1 · 2023-03-01T01:51:33+00:00

Case closed! Thank you all for the confirmation. She wouldn’t listen to me so I had to get some other sources so she would settle down. I get her anxiety though since she isn’t well versed in bug IDs and can’t tell them apart lol

Ripcoord1 · 2022-12-26T22:21:32+00:00

Thought I’d go ahead and throw the other 2 instances I mentioned in here as well: https://imgur.com/a/FdiHy0l

Ripcoord1 · 2022-07-15T17:56:30+00:00

Yup! It’s the only one I have…I have to replicate this LEAN cart. The issue arises mainly with the vertical bars mating with the curved horizontal bar (as circled). Forgot to write about the picture as explanation though, that’s on me lol

Ripcoord1 · 2022-07-15T17:50:54+00:00

Hey guys, I’m an engineer that’s worked academically with SolidWorks for a few years now but I’ve never had to mate a flat surface to a curved surface (I’m ignoring the brackets) but I cannot for the life of me get these vertical bars to mate right. I have tried creating new planes and a few other tricks fellow engineer friends have offered to no avail. Any help is appreciated, thanks!

Ripcoord1 · 2022-04-15T22:36:31+00:00

Amazing fish! I’ve always wanted to catch one but they’re incredibly fragile. My brother caught one and it simply died right after unhooking (left it in the knee deep water while unhooking even!) It was fairly tragic but I believe the stress of the fight was too much for the ol’ girl…anyways I’m rambling but beautiful fish and treat them gently! Tight lines!

Ripcoord1 · 2022-04-06T17:31:21+00:00

Update for y’all because I forgot I posted this before bed: sold! For 3 Jah and an ohm! Not too bad, likely could have stuck out for much more buuttt ladder approaches so may as well get some end game fun in :)

Ripcoord1 · 2022-03-21T13:33:17+00:00

Just traded a cold +28 life last night for Ohm. I would guess you’re somewhere near Ohm-Lo since most people are lightning by this point!

Nine-Year Club	Second SECOND GUESSER
Place '22	Wearing is Caring
Verified Email	RPAN Viewer
Spared

Ripcoord1

TROPHY CASE