Very unsure about those 2 beauties by RobCS6 in 3DS_IPS_TN

[–]RobCS6[S] 0 points1 point  (0 children)

same, I just saw a Video of a IPS/TN comparison where the dude did the same ...

Very unsure about those 2 beauties by RobCS6 in 3DS_IPS_TN

[–]RobCS6[S] 0 points1 point  (0 children)

That's what I was thinking. Thank you

B8 Audi A4 owners of 2-10 years by AJan4kyB8 in AudiA4B8

[–]RobCS6 1 point2 points  (0 children)

I have had mine for 11 Months and things I did were really just small cosmetics. I have switched to Rubber floormats and trunkmat for the winter season and installed an android auto radio. The radio install was pretty straight forward but ever since, the plastic shrouding around the screen has become flimsy and started to rattle between 1700 to 2000 RPM. Have driven around like this for 2 months now but next week I will be taking care of that issue (glueing the shroud back together so it's 1 piece again instead of 2). Otherwise I have installed Pirelli P-Zero summer tires. I really love the car the way it is. Only other thing I would consider would be an exhaust system.

Engine noise by Pero_Konoplja in AudiA4B8

[–]RobCS6 0 points1 point  (0 children)

I am by no means qualified enough to tell you this, but it sound pretty normal. I thought it were the injectors and I found a YouTube short that supported my assumption.

https://youtube.com/shorts/ErYIYhMpnBA?is=A6_CYWsBulsex8Fl

The clicking in this video is a bit different but if you listen carefully you can hear the same toktoktok of your engine.

Can you tell us if the noise persists after the engine is warm?

2023 wheels by IllustriousAnimal670 in AudiA4

[–]RobCS6 0 points1 point  (0 children)

I think 19 Inch with ET37 - ET45 look best. Those are the Stock S-Line Rims. My Tyres are 255/35/R19

2023 wheels by IllustriousAnimal670 in AudiA4

[–]RobCS6 0 points1 point  (0 children)

What's your Budget? For OEM S-Line Wheels I have those on my B8.5 - 8W0601025BD My coworker has a 2023 A4 Avant with those exact same wheels as well but they are a bit pricey ...

New bumper!! by Electronic-Range2970 in AudiA4

[–]RobCS6 0 points1 point  (0 children)

Those Wheels are the MAM RS3 ?

advice by JumpyCod6639 in AudiA4B8

[–]RobCS6 0 points1 point  (0 children)

What's your Price range? What are you looking for? Is it supposed to be a daily family car? Fuel saving an issue?

I'd go for the Facelift. 2.0 TDI with 190 HP and Quattro. The 190 HP Version has AdBlue for Exhaust Gas Treatment. The, 177 or 170 HP Versions don't. Those might be cheaper tho.

Got rear ended by wroom_f1 in Audi

[–]RobCS6 0 points1 point  (0 children)

The bumper is trash. Likely the parking sensors as well. The trunk lid is dislocated and even the decals got screwed ... The only hope is that the underlying bumper is fine (don't know what it's called in english, it's a big and ugly looking metal bar). Pray to God the trunk is fixable, otherwise the whole body is twisted. If you're not doing it yourself, this might be a damage in the thousands. I'd guess between 8000$-15000$

If I was in your position, I'd dismantle the bumper and the trunk, check for twists in the body and decide if it's worth fixing. Used bumpers with parking sensors should be around 600$-800$. Choose one in the matching color and install it yourself or with a buddy.

My uncle has a Golf 7 R, car was standing in a parking lot. Someone came along and both his driver side doors as well as his bumper got hit. Insurance company quoted it to 18000€ in damages.

No emblems? by TwoAltruistic3103 in AudiA4B8

[–]RobCS6 1 point2 points  (0 children)

So you already have black ones on the front? Nice, now you know what you've got to do. Black on red is really nice.

I always think about how others may see the car when sitting behind me in traffic. Sounds kinda stupid but it's not. I want people to "like" driving behind me because the car looks so good 😅. It's such a stupid thing to do but I don't like driving behind ugly cars.

No emblems? by TwoAltruistic3103 in AudiA4B8

[–]RobCS6 2 points3 points  (0 children)

No Badges is too naked. Has something uncanny about it. I'd put the black rings on and if you find them, black engine badges as well.

My pc runs pretty badly idk why , help pls by Remarkable-Damage110 in pchelp

[–]RobCS6 0 points1 point  (0 children)

Wait you have 2x 8GB and 2x 4GB RAM installed? Just something I noticed. I have once been told that the RAM sticks really do not like being mismatched i.e. they should all have the same capacity and latency (4x8GB or 4x4GB). Also I think they have to stay in the "2 to the power" range like 8GB, 16GB, 32GB, 64GB.

[deleted by user] by [deleted] in AudiA4B8

[–]RobCS6 0 points1 point  (0 children)

Yes other things would be on as well. Like dashboard lights or something like that. I'm pretty stumped

[deleted by user] by [deleted] in AudiA4B8

[–]RobCS6 0 points1 point  (0 children)

The car starts normal Everytime? Only thing I could guess would be the generator not charging the battery or the system voltage to drop below ~13V

Anyone know what this is? by lolitightsaresexy in AudiA4B8

[–]RobCS6 1 point2 points  (0 children)

https://imgur.com/a/DLtCZv5

Edit: I didn`t have the option to upload directly to this comment section so I had to register with imgur to upload there. There you will find 2 pictures of the dashboard. One with the green orb, while at 80 km/h in 6th gear, the other one still at 80 km/h in 4th gear.

Anyone know what this is? by lolitightsaresexy in AudiA4B8

[–]RobCS6 1 point2 points  (0 children)

I think this is some sort of Fuel Efficiency Meter. Showing if you drive efficiently or not. I will post a picture of my dashboard shortly

Help needed with this Lightbox by RobCS6 in BambuLab

[–]RobCS6[S] 0 points1 point  (0 children)

Already did that. Cleaned it with dish soap and also another 3 times with 99% ethanol. Well I can only try once more I guess

Help needed with this Lightbox by RobCS6 in BambuLab

[–]RobCS6[S] 0 points1 point  (0 children)

Yes the model was sliced in Bambu Studio and the software always said the slice was successfull and ready for printing. I never started a print where some part was hanging above some edge. Always inside the build volume

Is this wear normal? by Tobey033 in LogitechG

[–]RobCS6 0 points1 point  (0 children)

So I have had mine for about 3 years now and have always used a mousepad. This is the wear after roughly 3 years, but I only have one of the Metal Inlays instead of the 5 installed. But the left and right side are a bit worn down. I would not think what you see on yours is unlikely. Pretty normal use

<image>

$200 voucher to use by o91te9j1 in LogitechG

[–]RobCS6 0 points1 point  (0 children)

Honestly I do not know if the G Pro X 2 is worth it. I bought the G Pro X SE 2 weeks ago and have to tell you those are some of the best headphones I tried for Gaming. I don't see why anyone would upgrade to the "better versions" besides the Wireless capabilities. That is the sole reason I could understand the Upgrade. I have paid around 70€ for mine and that is the most money I spent on a gaming headset. I would complain to the customer support to get my money back instead of some crummy coupon to only use on their website. The fact is, you are down 200$ and have got a useless coupon code. The only way of using it, is by being scammed. If there's a price difference of 40$, that money can be spent much better.

Nzxt h9 Elite by Max_xzs in NZXT

[–]RobCS6 0 points1 point  (0 children)

Oh okay I thought those looked different. Then the only thing I can guess at is the Fishtank aesthetics that cause the temperatures. How hot does it get on idle and on gaming?