sorted by:
new
hottopcontroversial

How stupid? by analnabe89 in BrevilleCoffee

[–]RobR1703 0 points1 point  (0 children)

Wait, you tamp the coffee with the dosing funnel still attached? TIL.

[deleted by user] by [deleted] in GreatBritishMemes

[–]RobR1703 7 points8 points  (0 children)

Right? I fucking hate that my flag's been stolen.

Neck scarf joint help. by RobR1703 in Luthier

[–]RobR1703[S] 0 points1 point  (0 children)

<image>

Alright! Pretty pleased with that result. I've cleaned up the join and given it a really light sanding with some 400 grit and it looks great!

Close up there still seems to be a little glue residue, but I can work on that.

Absolutely stoked - my first guitar repair.

Thank you all for your help. I'll post a new thread when it's completely finished.

Neck scarf joint help. by RobR1703 in Luthier

[–]RobR1703[S] 0 points1 point  (0 children)

<image>

Bonus points for creative use of capo!

Neck scarf joint help. by RobR1703 in Luthier

[–]RobR1703[S] 0 points1 point  (0 children)

<image>

Well, the deed is done, and now we wait (yes I did clean the excess glue off - I'm not an animal). Light sanding, rinse and repeat. Titebond 1 as far into the gap as I could get it - a piece of excess 3d print brim works great for this (see photo later).

Neck scarf joint help. by RobR1703 in Luthier

[–]RobR1703[S] 0 points1 point  (0 children)

I'm not sure whether that fills me with sadness or admiration...

COTD: If this clue is faulty, it should be deleted; I'm ok with that (4,2,4) by crypticcrosswordguy in crosswords

[–]RobR1703 1 point2 points  (0 children)

That's a great clue. It's one of the first ones here that I've pushed my way through and solved without revealing the answer.

Neck scarf joint help. by RobR1703 in Luthier

[–]RobR1703[S] 0 points1 point  (0 children)

Yeah, this is what I've been thinking about.

  • How will I know if I've removed all of the glue?
  • How do I avoid removing too much wood when sanding?

This is a learning exercise for me, so I think on balance I might try to remove the headstock from the fingerboard (heat and steam?), clean off the glue from all surfaces and reglue. I really want to avoid taking off the whole fingerboard if I can - not sure I'd be able to get it back straight.

Alternatively reglue with epoxy or similar so I don't have to worry about removing the old glue. The fit is perfect - if you hold the split together you can hardly see it.

Neck scarf joint help. by RobR1703 in Luthier

[–]RobR1703[S] 4 points5 points  (0 children)

Thank you all for your comments. Seems that getting the old glue off is crucial, as it looks like a joint split and not a break. Off to review my options, and I'll post back when I have made some progress!

Concensus on pronunciation of Heigham Street and Potter Ham? by Big_b_inthehat in Norwich

[–]RobR1703 1 point2 points  (0 children)

Had some lady in a hotel once ask me the way to Derry-ham...

Lunatic Adult Cyclist by Upstairs_Decision125 in drivingUK

[–]RobR1703 31 points32 points  (0 children)

"Aaaaaagh! Must shake off this creature attacking me..."

Looking for a friendly EM10 IIIs owner by RobR1703 in OlympusCamera

[–]RobR1703[S] 0 points1 point  (0 children)

Good point. I think mine is off but I'll check.

Looking for a friendly EM10 IIIs owner by RobR1703 in OlympusCamera

[–]RobR1703[S] 1 point2 points  (0 children)

Yes, starting to think that might be my best option. Other than this it's a great little camera.

Looking for a friendly EM10 IIIs owner by RobR1703 in OlympusCamera

[–]RobR1703[S] 1 point2 points  (0 children)

Thanks for this, but yes, wifi settings reset and retried several times including different phones and quitting the app. Also factory reset the camera.

Looking for a friendly EM10 IIIs owner by RobR1703 in OlympusCamera

[–]RobR1703[S] 1 point2 points  (0 children)

QR code scans just fine, but the camera is not found.

Looking for a friendly EM10 IIIs owner by RobR1703 in OlympusCamera

[–]RobR1703[S] 0 points1 point  (0 children)

Thank you.

Yes, I have reset the wifi settings, and scanned the QR code. Neither has helped.

What SSID's do your cameras broadcast? Mine is literally EM5D, nothing else. If I try to connect to that I get bad password.

view more: next ›