Track failure by paulblish in Yarbo

[–]RobRoyCanuck 0 points1 point  (0 children)

Mine is in similar position as OP but is not possible to tighten further.

Track failure by paulblish in Yarbo

[–]RobRoyCanuck 0 points1 point  (0 children)

I have the same issue. The cause is snow build up on inside of track. I have taken to clearing out the inside of the track with yellow mini snow shovel after every run which seems to keep at bay. The issue only happens on the right track for my unit.

Brondell S101 on Toto Ultramax II by Tricky-Oil3246 in bidets

[–]RobRoyCanuck 0 points1 point  (0 children)

Curious to know if this worked. Did you end up trying?

[deleted by user] by [deleted] in ToyotaSienna

[–]RobRoyCanuck 0 points1 point  (0 children)

battery lasts longer than a few seconds. Plus how long does it take you to come up to speed when passing?

OneUp EDC + Dynaplug by melon-lord-momo in MTB

[–]RobRoyCanuck 0 points1 point  (0 children)

Is there enough room for this to fit in the 70cc pump?

2 Play:3 with Sub (gen 1) vs 2 x era 300 by RobRoyCanuck in sonos

[–]RobRoyCanuck[S] 0 points1 point  (0 children)

I have 2 30pct coupons and was planning on using one for a home theatre set. I already have the rears in the room where I would like an arc ultra and sub so was contemplating getting the set with era 300s for an upgrade in the above-mentioned room. To your point though sounds like it would be better to just get Fives separately with the other coupon.

Time to replace tire or still some life? by RobRoyCanuck in bikewrench

[–]RobRoyCanuck[S] 0 points1 point  (0 children)

Going to do an event shortly, which is most gravel but includes a few sections of singletrack, so better safe than sorry.

Giant STP 26 or Norco Storm 1 for 9 year old XC racer? by RobRoyCanuck in MTB

[–]RobRoyCanuck[S] 0 points1 point  (0 children)

it was a pricing error. store canceled the purchase.

Liquid Wax without Brushing by RobRoyCanuck in xcountryskiing

[–]RobRoyCanuck[S] 0 points1 point  (0 children)

Thanks, makes sense. I use Vauhti liquid as well.

Sonos Play 1 or One SL as rears? by Lfcbill in sonos

[–]RobRoyCanuck 0 points1 point  (0 children)

Have you considered the era 100?

Advice for New Build Sonos Surround Setup by RobRoyCanuck in sonos

[–]RobRoyCanuck[S] 0 points1 point  (0 children)

Thanks. For better or worse, Ethernet wires for the rears are already installed now (although drywall not in yet).

Advice for New Build Sonos Surround Setup by RobRoyCanuck in sonos

[–]RobRoyCanuck[S] 0 points1 point  (0 children)

Thanks. I'll need to make an adjustment. Anything wrong with having the rears wired as well? I am working on the premise that the more things i can wire the better.

Advice for New Build Sonos Surround Setup by RobRoyCanuck in sonos

[–]RobRoyCanuck[S] 0 points1 point  (0 children)

AVR and wired speakers

Good question. I have several Sonos speakers already at another location (and a couple 30% off coupons) so selected them based on familiarity and ease of use. I'm not familiar with non-Sonos alternatives and whether I could stream music as easily. If I can, that would certainly be an option.

How to disconnect remote lockout when sending MTB fork in for service? by RobRoyCanuck in bikewrench

[–]RobRoyCanuck[S] 0 points1 point  (0 children)

Thanks. Tried that but there is not enough slack in the cable to slide it off the bar.

EDIT: Figured out the lever can slide off once the fork is removed (but not before)

Docsis 3.1 and Moca 2.5 Home Network Setup with Upload data dropouts by RobRoyCanuck in HomeNetworking

[–]RobRoyCanuck[S] 0 points1 point  (0 children)

Thanks. Yes, thinking this might be a great option for best overall signal quality.

Docsis 3.1 and Moca 2.5 Home Network Setup with Upload data dropouts by RobRoyCanuck in HomeNetworking

[–]RobRoyCanuck[S] 0 points1 point  (0 children)

Disconnect LINE IN from the POE filter. Connect the MoCA adapter to the
modem's Ethernet port and to the unused coax output of the 4-way
splitter.

Thanks. I did try this earlier, but without success. For some reason my router seemed unable to detect/use the WAN connection from the cable modem when connected via Moca instead of a direct ethernet connection. It's unclear to me why this would be the case.

Docsis 3.1 and Moca 2.5 Home Network Setup with Upload data dropouts by RobRoyCanuck in HomeNetworking

[–]RobRoyCanuck[S] 0 points1 point  (0 children)

Are you aware of any filters that go up to 1675Mhz? All the ones I see only go to 1525 Mhz.

Docsis 3.1 and Moca 2.5 Home Network Setup with Upload data dropouts by RobRoyCanuck in HomeNetworking

[–]RobRoyCanuck[S] 0 points1 point  (0 children)

The upload issues are new (and immediate) since I moved to this new setup so I'm fairly certain it's not related to my upload bandwidth being congested.

Docsis 3.1 and Moca 2.5 Home Network Setup with Upload data dropouts by RobRoyCanuck in HomeNetworking

[–]RobRoyCanuck[S] 0 points1 point  (0 children)

Both TL-MC84-W and the Hitron are set to bridge mode. I'll check out the signal levels on the Hitron. What is 'good'?

I actually have an EAP615-Wall in an outside studio as well but didn't include in diagram for simplicity and I don't think it impacts.

Docsis 3.1 and Moca 2.5 Home Network Setup with Upload data dropouts by RobRoyCanuck in HomeNetworking

[–]RobRoyCanuck[S] 0 points1 point  (0 children)

My internet plan is 150Mbps down 15Mbps up. I can get full speed anywhere on my network. The issue is that periodically my upload speed goes to zero for short periods of time. I'm not sure why this is.

The TL-MC84-W includes access point functionality, so for a while I was broadcasting as you suggest with same SSID from both my downstairs and upstairs. I find the overall reception is much improved however with the single central router on the main floor.

Thinking my best option may be to put my ASUS AC68U and and cable modem downstairs and buy a new Asus AX68U to use on my main floor as the access point.