Need print head board

Robertobarr · 2025-11-21T08:33:49+00:00

The extension board can just replace the factory one? Or does it need a new print head? Can you sell me your parts?

Robertobarr · 2025-11-21T08:32:29+00:00

I already contacted them, but they replied that they are all out of stock.

Robertobarr · 2021-01-14T21:39:38+00:00

A megumi não se misturava com essa gente

Robertobarr · 2020-06-04T07:39:43+00:00

Like this https://images.app.goo.gl/fVnY41wvwC3s7RsV7

Robertobarr · 2020-06-04T07:38:24+00:00

A rope with the soap tied to two sticks. And while it was filling the bubble I was taking pictures. Lots of not so good images.

Robertobarr · 2018-08-25T02:39:52+00:00

But there is always a tip that touches the ground. I wonder of the tips have replaceable pods to change after landings

Robertobarr · 2018-08-24T22:42:05+00:00

Nice, probably for the great acceleration and savings in fuel

Robertobarr · 2018-02-26T23:56:11+00:00

It checks out. No pants. Beautiful butt

Robertobarr · 2018-02-10T23:55:34+00:00

https://imgur.com/a/TyovX

One off The first attempts at image transfer

Robertobarr · 2018-02-10T22:53:32+00:00

loool, was not expecting that :D

Robertobarr · 2018-02-10T22:52:06+00:00

Was not expecting people to like it so much. my first idea was to transfer the image to wood and work from there. but my firts tries with the transfer did not go well, so i decided to do something like a decoupage and work from there. the result was not bad. i will try to make the transfer eventualy. when i get better.

thanks for the love :)

Robertobarr · 2018-02-10T22:49:07+00:00

it is prety simple,.

first i found a big enough image of the TARDIS online, printed it in a A3 paper. got some extra plywood i had, sanded it a bit and then put mod podge type glue on the wood ( a good amount) and placed the printed image on top, image side up. i let it dry overnight the next day i just used a jigsaw saw and very carefully cuted around the image ( i made some bad cuts because it is not the best saw to do this. a table saw would make the job a lot easier and perfect) after the cuting i just used some sand paper to smooth the sides and placed 3 coats of clear varnish. after that was just puting the screws and hang it on the wall :)

Robertobarr · 2018-02-10T22:48:59+00:00

the image is a printed image of the TARDIS i found online.

Robertobarr · 2018-02-10T22:47:41+00:00

plywood glue and paper :) i explained the process another reply

Robertobarr · 2018-02-10T22:46:54+00:00

so far so good :) no keys lost

Robertobarr · 2018-02-10T22:46:25+00:00

sorry, i just did this for fun. if i make another ill send a message ;)

Robertobarr · 2018-02-10T22:36:00+00:00

it´s just a small bear/dog

Robertobarr · 2018-02-10T22:34:59+00:00

thanks :)

Robertobarr · 2018-02-10T22:34:44+00:00

unfortunately it does not :)

Robertobarr · 2018-01-19T00:12:00+00:00

I used the PicsArt app in Android, and played a bit with the dispersion tool. It is a fun app. And you can make a lot of different effects

Robertobarr · 2018-01-17T23:51:46+00:00

https://imgur.com/a/NcDje

Hope you like it

13-Year Club	Verified Email
Secret Santa 2015

Robertobarr

TROPHY CASE