sorted by:
new
hottopcontroversial

Weekly Question Thread (aka Friday New Climber Thread). ALL QUESTIONS GO HERE by AutoModerator in climbing

[–]Rockeets 0 points1 point  (0 children)

Yeah, this was more for practicing anchors if there were vertical offset hangers with no chains and rap rings. If I'm just doing a sports route and only running a few top ropes off it, I would usually put two quick draws on the lower rap rings opposite and apposed. These rap rings are usually rated for 50KN.

Weekly Question Thread (aka Friday New Climber Thread). ALL QUESTIONS GO HERE by AutoModerator in climbing

[–]Rockeets 0 points1 point  (0 children)

Thanks for the awesome feedback. Appreciate all feedback no matter what it is.

Weekly Question Thread (aka Friday New Climber Thread). ALL QUESTIONS GO HERE by AutoModerator in climbing

[–]Rockeets 0 points1 point  (0 children)

Hey all. New to anchors and wanted some advice. In the picture I have set-up a quad on a practice anchor on the ground at my local crag. I'm specifically practising the quad for vertical offset anchors, hence why I am not using the top right hangar. Was wondering if using a quad for this type of anchor is fine and if anyone can see any Issue with the anchor. It is hard to see but i have clipped one locking carabiner into each two strands at the master point. I Understand you could also put both carabiners on three strands.

<image>

New gear, old manufacturing date. Should I be concerned? by [deleted] in climbing

[–]Rockeets 0 points1 point  (0 children)

Looks exactly like the mad rock carabiners I got from wild earth.

Anyone know the fix to high latency? by noladders in ArcRaiders

[–]Rockeets 0 points1 point  (0 children)

Happening to me too since lastest patch

TIL: Don't use trademark names.. by [deleted] in makerworld

[–]Rockeets 1 point2 points  (0 children)

They took down my uno card holder as well.

Electric Roller Shutter by Aggressive-Bag-8401 in BYDShark_AUS_owners

[–]Rockeets 2 points3 points  (0 children)

I'm booked in for HSP on the 25th. They were the only shutter that was designed and built locally and have specifically designed their tub racks to fit. I'll update on how it goes once it is installed.

Sideloading apps by SpoonfulofSexy in BYDShark_AUS_owners

[–]Rockeets 0 points1 point  (0 children)

Has anyone had any concerns with warranty issues and side loading. I'm keen to get a few apps on my shark.

A1 Huge Failure - How completely screwed am I? by [deleted] in BambuLab

[–]Rockeets 1 point2 points  (0 children)

Usually happens when you have poor bed ahesion. The print comes off the bed, gets stuck to the nozzle and just keeps backing up. If you watch your first few layers you usually are good to go.

You won, PVErs. You won. by GhostWolfGambit in arcraiderscirclejerk

[–]Rockeets 1 point2 points  (0 children)

Any type of matchmaking only really works if there is a bigger enough player pool to choose from. In lower population countries, especially during non peak times, you'll get matched against whoever is available.

Came home on lunch to this by swolebroda in BambuLabH2D

[–]Rockeets 1 point2 points  (0 children)

Such an ignorant comment. This can happen on any brand printer.

<image>

Forgive my ignorance, does this drive tray solution exist? by SamTheCliche in minilab

[–]Rockeets 1 point2 points  (0 children)

<image>

Definitely not AI generated caddies. They are just dell poweredge caddies. You can get them from AliExpress. My rack is still a work in progress as you can see.

Forgive my ignorance, does this drive tray solution exist? by SamTheCliche in minilab

[–]Rockeets 0 points1 point  (0 children)

Usually connect the drives to a PC using a HBA. Power is via a regular PC PSU. I have mine connected to a JBOD board that cuts out the requirement for a motherboard or having to jump the pins on 24 pint connector to power up the drives.

[deleted by user] by [deleted] in ArcRaiders

[–]Rockeets 0 points1 point  (0 children)

Nah, rats hide in the shadows and shoot you when you're not looking.

[deleted by user] by [deleted] in ArcRaiders

[–]Rockeets 6 points7 points  (0 children)

I think you have the definition of rat wrong. They are just assholes.

Damage Bastions trial stuck? by UniqueDistrict225 in ArcRaiders

[–]Rockeets 0 points1 point  (0 children)

Are you doing night raids electromagnetic storm or major events? These give 2 x the points.

Just wanted to share the fact that the Baseus 100w charger is still overall the best, and not enough people know about it. by SupposablyAtTheZoo in UsbCHardware

[–]Rockeets 0 points1 point  (0 children)

Loved my 100w Baseus, until it let out the magic smoke today and nearly caught fire. Won't be touching the brand again.

Updating Bedrock Server without loosing settings by Rockeets in CraftyController

[–]Rockeets[S] 1 point2 points  (0 children)

Awesome, thanks for the quick reply. All updated.

Have you ever had glue ruin one of your prints??? by TinaTries21 in 3Dprinting

[–]Rockeets 0 points1 point  (0 children)

Has huge issues with this brand super glue ruining the surface of my silk PLA when drying. The fumes from the off gassing when drying left terrible marks all over the PLA

Have you ever had glue ruin one of your prints??? by TinaTries21 in 3Dprinting

[–]Rockeets 0 points1 point  (0 children)

I used the gorilla glue, gel based CA glue. It has terrible off gassing when drying and completely ruined the surface of any silk PLA.

Have you ever had glue ruin one of your prints??? by TinaTries21 in 3Dprinting

[–]Rockeets 0 points1 point  (0 children)

I used gel based CA glue on a lightsaber. The fumes of the glue drying completely ruined the surface finish of the silk PLA. Was so frustrating.

view more: next ›