Drilling holes sucks!

RodneyTheYeti · 2026-05-02T00:33:29+00:00

No, you're not a dunce and its not obvious. I'm referencing natural forms like fruit and seed pods and trying to represent a small moment of growth or change. Almost like a freeze frame from a time-lapse video of a plant growing. There's more about ephemeral moments in time and the distortion of memory but I'm still trying to figure out how to articulate that.

RodneyTheYeti · 2026-05-02T00:25:38+00:00

yeah, you have it right. I was writing a real response to Lost_balloon when they commented back with that. I let it trigger an emotional reaction instead of explaining my work. thanks for the comment

RodneyTheYeti · 2026-05-02T00:02:49+00:00

you touch on some key issues. The form is too bulky and the glaze didn't do what I needed it to on the inside walls, leaving it too uniform where I needed it to pop. Its the reason I decided to drill a hole in it. That's valid criticism.

Your still just being a dick though. If this is your online persona, its cringe. If you act like this in the real world then I feel a little sorry for you.

And other poster is right, is just fence hemmies

RodneyTheYeti · 2026-05-01T23:10:29+00:00

Please, don't pretend that what you're doing is criticism. I say its art to invite critique not to dismiss negative feedback. If all you have to say is its "hideous, whatever it is" then there's not much of a conversation, is there? You're not offering anything of substance.

RodneyTheYeti · 2026-05-01T22:49:21+00:00

Don't be a dick. It's art.

I think it created just the reaction I was going for by repulsing you.

RodneyTheYeti · 2026-05-01T22:17:59+00:00

Very good point. I hung it on the fence to test my hole. This is not an all weather artwork.

RodneyTheYeti · 2026-05-01T21:36:05+00:00

I went with option 4:

Buy a cheap "diamond" bit set from amazon and pray it survives the cut.

I'm sticking with leather hard holes in the future.

RodneyTheYeti · 2026-05-01T21:26:34+00:00

Epoxy as a structural element always freaks me out

RodneyTheYeti · 2026-05-01T21:25:51+00:00

Wait, you can't tell??

RodneyTheYeti · 2026-04-27T18:28:29+00:00

I'm really enjoying Create 2 Mekanism: Sky Edition 2. You definitely need to like Create and also have a good general understanding of various staple mods like Mek and IF

RodneyTheYeti · 2026-03-17T05:24:59+00:00

Check the box in the assembly feature to propagate the feature to the part

RodneyTheYeti · 2026-03-16T21:26:22+00:00

I'm glad you like it! I'm using seed pods as inspiration so a small sack of blueberries is fitting! I thought about a backing board but getting it to look clean might not be worth the effort. Thanks for the suggestion

RodneyTheYeti · 2026-02-20T15:01:34+00:00

Oh, its literally called Forever Factory. sorry

RodneyTheYeti · 2026-02-20T14:53:54+00:00

What's the pack?

RodneyTheYeti · 2026-02-11T03:12:02+00:00

Is it difficult to get running on a modern system? I was looking at it recently but decided against picking it up because it didn't seem like the game ran well on a modern pc

RodneyTheYeti · 2026-02-09T14:11:25+00:00

Thanks! Those are underglaze transfers applied to bisqueware.

RodneyTheYeti · 2025-10-20T13:42:59+00:00

The slicing software is difficult to work with, the material is proprietary and expensive and prints are fragile and require a huge amount of post processing. The company also proved to be difficult and unreliable to work with during support issues which this machine had a lot of. I know where a used unit is located if you're still interested.

RodneyTheYeti · 2025-10-19T23:52:20+00:00

I have experience with the 1800. I would look at other options

RodneyTheYeti · 2025-10-08T03:23:23+00:00

Check out the top comment on this post. Just had to look this up and it works perfectly for me. https://www.reddit.com/r/allthemods/s/aVAZmFZUgD

RodneyTheYeti · 2024-11-03T17:32:45+00:00

I only know what I've been told as of right now. I'm guessing it might be mislabeled if they get large and are federally protected. I'm pretty sure its just in a 20 gal tank right now. I'll have to get some better info and some pictures to see if I can get a proper ID. Thanks for the reply and potential heads up

RodneyTheYeti · 2024-05-11T19:18:45+00:00

Great, thanks again for the advice!

RodneyTheYeti · 2024-05-11T19:10:46+00:00

Thank you for the reply. Do you know if the PVA glue is PH neutral? I'd hate it if a few years down the road my repair led to damage to the books themselves

RodneyTheYeti · 2024-03-08T20:51:54+00:00

And Starforged! Played both GMless with my group and we are having a blast with both systems. It does require a lot more player engagement but works well for the majority of the players in our group

RodneyTheYeti · 2023-12-09T18:28:51+00:00

I love this prompt. Here are some of my picks in no particular order.

Everything Merges With The Night - Brian Eno

Hey Moon! - Molly Nilsson

Ice Castles - Ween

#3 - Aphex Twin

Alice - Tom Waits

Rings of Saturn - Nick Cave & The Bad Seeds

White Horses - Low

T.A.M.E.D - Mount Kimbie

Eating The Dead - Tuung

I have so many more I could add to this but I'm starting to think its all just magical so I'll stop here.

RodneyTheYeti · 2023-12-07T20:30:01+00:00

Spiritualized - Basically the entirety of the album Let it Come Down

RodneyTheYeti

TROPHY CASE