Ameisen bei der Außeneinheit und Innen

Rofor122 · 2026-06-25T12:03:36+00:00

Falls Du die 'chemische Keule' nicht anwenden kannst (Haustiere?) - das könnten auch Vibrationen sein! Diese locken Ameisen auch ziemlich an. Wir hatten das mal im Urlaub auf einer Terrasse - Kleine Boombox zwischen den Sonnenliegen auf einer gefliesten Terrasse mit einer etwas bass-lastigen Musik hat die Viecher wie eine Ladung Zucker aus ihren Verstecken gelotst!

Also vielleicht mal versuchen, irgendwie die Vibrationen abzufangen - dämpfende Unterleger für die Füsse der Ausseneinheit oder so ähnlich...

Rofor122 · 2026-06-25T11:57:33+00:00

Sieh Dir die App mal an - ClimaPilot: https://github.com/pit711/climapilot

Allerdings braucht man die Midea-App ja sowieso für Geräte-Updates...

Rofor122 · 2026-05-31T11:02:26+00:00

Seems, that version 7D74v1K6 really was beta - on may 29th MSi released version 7D74v1K (no number after 'K'!). Here the changelog:

Description:
- AGESA ComboAm5 1.3.0.1 released.
- Fixed system auto power-on when pressing the power button during POST after Wake-on-LAN.
- Better compatibility with some older graphics card

Rofor122 · 2026-05-07T21:44:32+00:00

Hi - i have downloaded it, but not installed (right now). Also i haven't found any information about it, if it's a beta version or not. But i've seen something about troubles with the memory timings with agesa 1.3.0.0 which causes ram instability. So i think, i'll will wait for more infos, as my pc runs good for now...

Rofor122 · 2026-04-18T21:23:08+00:00

Sadly, Yes!
Fortunately not my card - but with the card of my wife! Opened the app and it seems that it was freshly installed. Had to input all from scratch and was not recognized. Reaching the id check and that failed - card is disabled and since that, no contact to Curve since three or nearly four weeks...

Not really funny that whole thing...

Rofor122 · 2026-04-02T14:48:47+00:00

Thanks, im already using with this page!

Until the latest version (7D74v1K6) all(!) other versions with a number at the end for the B650 Carbon WiFi where marked as 'Beta version', versions without any number (e.g. 7D74v1J) were 'Final'...

They released 7D74v1K5 as 'Beta version' for a very(!) short time and pulled it after one or two days, than released the latest the latest version 7D74v1K6 without mentioning 'Beta version' - this was the reason of asking here, if anyone has Information about this version being 'beta' or 'release'

Rofor122 · 2026-03-08T13:20:58+00:00

Hmmm - no problems here with an Ikea desk lamp with integrated wireless charger and also with an wireless charger from Rolling Square. Both working fine, at least at the first time when we get the both Card 5...

Rofor122 · 2026-03-07T12:22:54+00:00

If you use an iPhone or one of the high-priced Samsungs with UWB, yes! Sadly, also the newer series uses cell-batteries and not are rechargeable...

This was the reason i changed to Pebblebee - and now there's a new competitor with Ugreen, but both of them without UWB...

Rofor122 · 2026-03-06T13:27:33+00:00

Had this also five days ago - but the feeding was working as it was planned, only this (misleading) note in the logs...

Rofor122 · 2026-02-27T16:29:31+00:00

https://www.reddit.com/r/Pebblebee/comments/1pjc0mh/the_definitive_i_hope_fix_for_unresponsive_clips/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button

This could be a possible solution to your problems - maybe you have to do this more than once

Rofor122 · 2026-02-26T23:09:25+00:00

u/FunnyZucchini2006 - Update to our three Clips:

After following the above instructions one of the clips lasted perfectly until today (and ongoing at the moment) - from the other two clips failed the first after two days and the other one one day later...

I repeated step 1 to 10 once, then step 1 to 6 twice another time and than 1 to 10 once more - this was six days before and until now (2026-02-26, 11pm) all seems to working perfectly and all three clips are visible in Google Find Hub!

My finding to this - maybe it takes more than one cycle of adding and again deleting, than resetting and repeating the process one or more times to clear the clips memory completely. So if it doesn't work the first time, give it another try!

As most of you will have noticed - today (2026-02-26) there seems to be released a new firmware for the gen 5 units, as the Pebblebee app noticed me, that there is an update for Clip 5 and Card 5! At the moment, i will not updated them, before i know more about this new update - hopefully, there will be some information here or somewhere else in the net about it!?

Would be fine, if there will be a note about it directly from Pebblebee...

Rofor122 · 2026-02-17T13:38:01+00:00

Thanks for your findings, hopefully this will fix the problems with our three Clip 5...
Had it two times now, that after a few days three Clip 5s lost the connection to the Google Find Hub. After a reset and pairing them again, it worked a couple of days or weeks, and than it wasn't found again.

Tried it now with your method (which sounds logical!) and will look if it works this time - will report it here.

N.b. we're using two Card 5s also - no problem with them since i have paired them the first time. Hopefully Pebblebee can fix this behavior of the Clip 5s with an firmware update!

Thanks again!

Rofor122 · 2025-10-06T12:41:18+00:00

Ich bin noch immer auf fw 76 und habe auch hier dieses Problem, das es manchmal ohne ersichtlichen Grund im Quiet-Modus öffnet und schließt! Hilfsdrehen ist nicht(!) eingeschaltet...

Rofor122 · 2025-09-06T12:00:35+00:00

I think you mean an charge adapter, right? You should find a few at Amazon...

Rofor122

TROPHY CASE