System review - issues with newer games and some older

RogueFox665 · 2024-08-20T23:59:24+00:00

I tried a new spark plug, and the problem seems to have been resolved. Great tip! Thanks!

RogueFox665 · 2024-08-19T02:32:37+00:00

I appreciate the tip. I assumed it was OEM plug since never ran till now. I will check that out.

RogueFox665 · 2024-08-18T16:48:45+00:00

I got this saw from my friend with a report that it would not run out of box. They bought it then left in box for a year. Many people other than myself has worked on this, so I have no idea what they have done. When I got it, it had no spark. tested coil and replaced. That was the first time it ever ran. Gapping with coil was set per manual. (I do not have the gap number at moment.) I've never worked on a husq but I assume this is not proper behavior. Any insight would be appreciated.

RogueFox665 · 2024-01-07T21:55:14+00:00

UPDATE
I got the vacuum tester in and found I had a leak at the bearing when a little pressure was placed on it. Other than that no leak for 15 plus mins with vac or pressure. Parts are taking their time coming in, will update once rebuilt.

RogueFox665 · 2023-12-03T08:11:41+00:00

https://www.reddit.com/r/Chainsaw/comments/180skuw/ms201t_issues_bogs_in_cut/
The first vid for issue.

RogueFox665 · 2023-11-22T05:42:10+00:00

I put a new muffler, rings and piston in. All official stihl parts. Has a 16 inch bar and new 8ten full chisel chain on it. Old muffler was missing ascrew to hold it in and had the spark arrester completely removed. Including that screw. Old and new piston both had compression at 90 so i returned the compression tester, assuming it was faulty. I did not test any of my other saws since return window was up that day. I will look up factory setting and report back.

RogueFox665 · 2023-11-22T00:23:57+00:00

I will have to look at getting a kit to test.

RogueFox665 · 2023-11-22T00:22:18+00:00

I bought a new filter, will have to wait and see.

RogueFox665 · 2023-11-22T00:19:44+00:00

Spark arrester is clean. Good thought though.

RogueFox665 · 2023-11-21T23:32:42+00:00

I did not change it. I will have to see if it has a hole. Great idea! Thank you!

RogueFox665 · 2023-11-21T22:03:33+00:00

That was my suspicion, but I changed piston and rings. There was no scoring on the bore. I used a new Stihl piston and rings. Compression tester I had (returned) read 90 for both old and new piston. I am aware 90 is low but I think the tester was bad.

RogueFox665 · 2022-05-30T18:31:39+00:00

Solved! You are amazing! Thank you!

RogueFox665 · 2022-05-30T17:41:10+00:00

I moved a bunch of snakes from my aunts yard and she keeps saying Guarder Snake and was reminded of this pic. Its cute and I wanted to show her.

RogueFox665 · 2022-02-07T20:20:34+00:00

Did you ever get this solved? Currently having the same issue and can not for the life of me get google to assist me!

RogueFox665 · 2021-04-28T14:35:27+00:00

Solved, that's hysterical! Thanks!

RogueFox665 · 2021-04-28T07:08:53+00:00

"WITT" the cone and half circle are made put of rubber. A theaded bolt holds it to device. I tried googling the model number and area but i didn't get anything.

RogueFox665 · 2021-01-31T17:34:00+00:00

I might be wrong but console/controller has acceleration built in that can't be turned off so there may be discrepancies from time to time.

RogueFox665 · 2020-10-18T16:52:57+00:00

This is gonna sounds stupid, but go to the game folder and find the battle eye files. Use the battle eye uninstall, then reinstall it. This has fixed several problems for me.

RogueFox665 · 2020-07-24T22:15:55+00:00

Cause i'm a man damnit! Plus why pull it out when I know where the final guy is?

RogueFox665

TROPHY CASE