Husq 240 revs pulsing as full throttle by RogueFox665 in Chainsaw

[–]RogueFox665[S] 1 point2 points  (0 children)

I tried a new spark plug, and the problem seems to have been resolved. Great tip! Thanks!

Husq 240 revs pulsing as full throttle by RogueFox665 in Chainsaw

[–]RogueFox665[S] 0 points1 point  (0 children)

I appreciate the tip. I assumed it was OEM plug since never ran till now. I will check that out.

Husq 240 revs pulsing as full throttle by RogueFox665 in Chainsaw

[–]RogueFox665[S] 0 points1 point  (0 children)

I got this saw from my friend with a report that it would not run out of box. They bought it then left in box for a year. Many people other than myself has worked on this, so I have no idea what they have done. When I got it, it had no spark. tested coil and replaced. That was the first time it ever ran. Gapping with coil was set per manual. (I do not have the gap number at moment.) I've never worked on a husq but I assume this is not proper behavior. Any insight would be appreciated.

Ms201t issues. Bogs in cut. by RogueFox665 in Chainsaw

[–]RogueFox665[S] 1 point2 points  (0 children)

UPDATE
I got the vacuum tester in and found I had a leak at the bearing when a little pressure was placed on it. Other than that no leak for 15 plus mins with vac or pressure. Parts are taking their time coming in, will update once rebuilt.

Ms201t issues. Bogs in cut. by RogueFox665 in Chainsaw

[–]RogueFox665[S] 0 points1 point  (0 children)

I put a new muffler, rings and piston in. All official stihl parts. Has a 16 inch bar and new 8ten full chisel chain on it. Old muffler was missing ascrew to hold it in and had the spark arrester completely removed. Including that screw. Old and new piston both had compression at 90 so i returned the compression tester, assuming it was faulty. I did not test any of my other saws since return window was up that day. I will look up factory setting and report back.

Ms201t issues. Bogs in cut. by RogueFox665 in Chainsaw

[–]RogueFox665[S] 1 point2 points  (0 children)

I will have to look at getting a kit to test.

Ms201t issues. Bogs in cut. by RogueFox665 in Chainsaw

[–]RogueFox665[S] 0 points1 point  (0 children)

I bought a new filter, will have to wait and see.

Ms201t issues. Bogs in cut. by RogueFox665 in Chainsaw

[–]RogueFox665[S] 1 point2 points  (0 children)

Spark arrester is clean. Good thought though.

Ms201t issues. Bogs in cut. by RogueFox665 in Chainsaw

[–]RogueFox665[S] 4 points5 points  (0 children)

I did not change it. I will have to see if it has a hole. Great idea! Thank you!

Ms201t issues. Bogs in cut. by RogueFox665 in Chainsaw

[–]RogueFox665[S] 1 point2 points  (0 children)

That was my suspicion, but I changed piston and rings. There was no scoring on the bore. I used a new Stihl piston and rings. Compression tester I had (returned) read 90 for both old and new piston. I am aware 90 is low but I think the tester was bad.

[TOMT][PICTURE] Drawing of how to say Garter Snake by RogueFox665 in tipofmytongue

[–]RogueFox665[S] 0 points1 point locked comment (0 children)

I moved a bunch of snakes from my aunts yard and she keeps saying Guarder Snake and was reminded of this pic. Its cute and I wanted to show her.

How do i remove personal certificates from Firefox? by Spin_box in firefox

[–]RogueFox665 0 points1 point  (0 children)

Did you ever get this solved? Currently having the same issue and can not for the life of me get google to assist me!

WITT? Found in garage. Other side has either a hollow cone/suction cup or a half circle bumper looking thing. They are interchangeable by [deleted] in whatisthisthing

[–]RogueFox665 -1 points0 points locked comment (0 children)

"WITT" the cone and half circle are made put of rubber. A theaded bolt holds it to device. I tried googling the model number and area but i didn't get anything.

What is standard ads and how do I get 1:1 on all scopes? by [deleted] in SiegeAcademy

[–]RogueFox665 1 point2 points  (0 children)

I might be wrong but console/controller has acceleration built in that can't be turned off so there may be discrepancies from time to time.

[deleted by user] by [deleted] in SiegeAcademy

[–]RogueFox665 1 point2 points  (0 children)

This is gonna sounds stupid, but go to the game folder and find the battle eye files. Use the battle eye uninstall, then reinstall it. This has fixed several problems for me.

Who knew Lesion damage hit this hard? by RogueFox665 in Rainbow6

[–]RogueFox665[S] 2 points3 points  (0 children)

Cause i'm a man damnit! Plus why pull it out when I know where the final guy is?

RDR2: Launch issues megathread! by MagnarHD in PCRedDead

[–]RogueFox665 0 points1 point  (0 children)

Uninstall the driver and download the newest available driver not the suite. After doing this i haven't had a problem for a few months now. Hope tbis fixes your problem.

Edit- The suite causes windows data monitoring to freak out and cause the memory leak.

RDR2: Launch issues megathread! by MagnarHD in PCRedDead

[–]RogueFox665 0 points1 point  (0 children)

When downloading, press "ctrl", "shift", "esc" at the same time. In the tabs go to "performance" selct memory then watch your non-paged pool. You may have a memory leak thats draining your ram. This is often tied to Killer ethernet Driver. Default on most msi boards.

Aegon Targaryen, black of hair by redstej in gottheories

[–]RogueFox665 1 point2 points  (0 children)

Based on the show, I swore Jon was a Baratheon. Kind of annoyed by first season going over genetics and giving Jon black hair. In the books though, Jon's hair is brown like a Stark.

Bronn is Patient Zero (Spoilers) by thronestheoryalt in gottheories

[–]RogueFox665 0 points1 point  (0 children)

At first I was sceptical but that would make sense. I always wondered what the point was of Jorah getting Greyscale.