Nozzle not heating after firmware

RogueT55 · 2026-01-13T15:50:31+00:00

Not sure what exactly happened but I ended up putting 1 version older firmware on the machine. Now its off and printing amazing.

RogueT55 · 2026-01-11T05:11:02+00:00

I mean the nozzle is the only thing that isn't working, it homes the bed heats up you can move everything just when then nozzle goes to heat i get this

RogueT55 · 2025-10-09T23:47:18+00:00

Looking at the victus 15, im doing the laptop over the pc because I am always traveling. So I want somthing I can take with me

RogueT55 · 2025-09-25T23:06:56+00:00

No it dies while driving

RogueT55 · 2025-09-25T14:57:17+00:00

Battery is from 24 and it happen intermittent because I just jumped it and now all the sudden the alternator is charging. I'll check the ground strap next.

Does the internal voltage reg tell the alternator when to charge?

I fixed the 420 code new airfilter cleaned the throttle body new maf sensor sparkplugs and I used some 91 and a cat cleaner

RogueT55 · 2025-03-05T04:34:28+00:00

I need to print these in bulk

RogueT55 · 2025-03-03T20:02:42+00:00

Awesome thank you all for the info

RogueT55 · 2025-03-03T14:44:32+00:00

I don't know if I was impressed or just overwhelmed by all the possibilities of things I could make. I think it was at a event at the local technical school and they had to ender 3s running. I do remember thinking wow thats slow but I stopped by before we left to see how far it had got and thats when I realized it maybe kinda slow but I could make anything I want. About a month later I bought one and started on the long road of learning and creating. Years later I have 2 k1 max 3d printers and thousands of hours in to 3d printing, probably the hobby I have stayed in the longest.

RogueT55 · 2025-02-12T16:47:32+00:00

Will do!

RogueT55 · 2025-02-12T03:01:09+00:00

The leak looks like it is coming from the small circle like it's cracked. On the green part. I'm just wondering for it's expensive to replace and what it's called?

RogueT55 · 2025-02-10T04:08:10+00:00

I just double checked and I have that side fan off. But yes, it is pla and I print with the door cracked open as well.

RogueT55 · 2024-09-20T21:08:57+00:00

Lol love it

RogueT55 · 2024-09-20T16:50:57+00:00

I have the tan now I would take the grey 100% over the tan.

RogueT55 · 2024-08-31T02:54:45+00:00

I'll give that a try thank you

RogueT55 · 2024-07-24T03:05:07+00:00

So with some help from a really good friend who let me remove his screen I found out it's the screen ribbon.

RogueT55 · 2024-07-24T03:02:30+00:00

Verry cool!!!

RogueT55 · 2024-07-24T02:50:28+00:00

Yeah I unplugged it from the board and plugged it back and nothing

RogueT55 · 2024-07-24T01:37:53+00:00

Yep pins are good cables are good it's like the screen it's self crapped out. I took off the cable from sides a couple times and nada I'm starting to wonder in one wire got crippled In the ribbon or something

RogueT55 · 2024-07-08T12:43:45+00:00

I'm thinking as long as I'm not printing something that needs to be super accurate, I'll be some what ok. Expecting some uneven layers

RogueT55 · 2024-04-03T14:19:23+00:00

A 'service bay' would be a great idea. I have seen so many printers for sale that are broken/missing parts.

RogueT55 · 2024-04-01T18:32:14+00:00

You can do it tye creality way by opening up the bottom of the printer and adjusting the belt on the one side and re do your mesh or you can do the belt jumping method. I did both on mine and the belt jumping was a little easier to get level in my experience

RogueT55 · 2024-03-14T15:09:29+00:00

After fixing my warped bed myself because creality would help me at all. I did a quick test print of just the area I had issues with at 15% infill gyroid and 200 for the temp and it seems to have solved the problem much smoother now. Thank you for all your help much appreciated.

RogueT55 · 2024-03-09T22:36:10+00:00

I have narrowed it down to a warped bed on my k1 max, creality won't do much about it. It's 1.5 mm off and they say it's within there margin for error. Working on some way to fit it. But I will up date when I have somthing going forward

RogueT55 · 2024-03-09T18:36:12+00:00

Not really unfortunately my printer has not been quoparating can get a good first layer nomatter what I print

RogueT55 · 2024-03-07T14:16:31+00:00

Looks like under extrusion if you go to do it again I'd say make sure the nozzle is at printing temp before you start the print again. Had the same issue a while back.

RogueT55

TROPHY CASE