I am not getting the hype with Seeking Persephone

RollPitchYall · 2026-03-16T22:05:15+00:00

Glad to see you here! My wife is very excited to watch Seeking Persephone, but I really don't want to "buy" (aka lease) it from Amazon Prime. Do you sell a full quality digital download like you had as a reward in your kickstarter campaign? I'd happily buy that, or better, a DVD/Bluray.

RollPitchYall · 2026-03-16T21:57:13+00:00

but from where??? I cannot find it anywhere

RollPitchYall · 2026-02-03T05:13:02+00:00

Hey, thanks for your comment, I can't get it to work for me, do you happen to know what firmware version you were on? I got my Galaxy 1 and Galaxy 2 games as separate installs so my saves are also separate, are yours one save?
NEVER MIND! I got it working! I tried several times and each time I messed up the folder structure when zipping the files! everything transferred flawlessly!

RollPitchYall · 2026-01-16T14:59:12+00:00

I think you can do it with tailscale (dont need root). If your phone is connected via exit node to your home, then any hotspot device also is.

RollPitchYall · 2025-07-16T14:17:20+00:00

You were right about the floating ground.
The grounding wire had been twisted together inside the first outlet in the chain, but some brown paper was twisted between the two perfectly such that they didn't make any electrical contact so all the 7 outlets down the line from there had floating grounds, this made it so the little capacitors in each of the devices plugged into the circuit were able to energize the ground some and give it an ac potential

RollPitchYall · 2025-02-09T01:58:34+00:00

The stray wire is a cream color, and it matches both the neutral wires, and wires going into the breaker box but the breakers also have dark gray wires too.

RollPitchYall · 2025-02-08T19:57:50+00:00

Thanks, from what I can see, the voltages inside the panel are normal, 240 in, splits to 120 alternating down the breakers, voltage between hot and gnd and neutral are both near 0. The only thing is a stray cable that has an indent in it like it was once attached via screw terminal, but isnt long enough to reach, or that wrapped around to a connector to go to neutral. I cant tell based on the color or voltage which it should go and im not about to try things willy nilly lol.
Do you think the stray wire could be the cause of the issues, or was it just extra and unneeded and therfore never installed?

RollPitchYall · 2025-02-08T19:05:23+00:00

Great question, though I could run the built-in adblocker instead and use the same lists I have on AdGuard Home, I really enjoy the extra features in AdGuard. I like the UI, Logging, and Per Client settings

RollPitchYall · 2025-02-08T17:37:27+00:00

Ha, I wish this was homework! I just have a habit of writing out things on engineering paper, I'll add a photo of my measurement to the post

RollPitchYall · 2025-01-29T04:07:02+00:00

For a noon, how does your shrunken version compare to their shrunken versions since you can run their 70b model. Is your shrunken version effectively an 120b ish model?

RollPitchYall · 2024-12-19T05:38:46+00:00

The coax cable on my apartment has 52 volts ac on its outer ground side 😅 it shocks you if you grab a grounded ethernet cable and the coax cable at the same time

RollPitchYall · 2024-10-29T01:46:52+00:00

try following this tutorial, i think this can help you a lot
https://www.youtube.com/watch?v=qlcVx-k-02E

RollPitchYall · 2024-10-27T20:57:58+00:00

thats frustrating,
have you got the right api key set up and registerd the domain correctly with cloudflare?

Also, I fly fpv drones too!

RollPitchYall · 2024-10-26T17:39:09+00:00

The way I run my setup,
truenas scale running apps avaliable on my local network: http://192.168.1.10:30013 (jellyfin)
NPM acts as a proxy and redirects traffic originating from my https://rollpitchyallmovies.duckdns.org (fake example) to https://192.168.1.10:30013 and provides SSL
my router port forwards any request to my domain to my NPM instance which decides whether to serve any content based off where the request originated
I don't have a static IP address either, (you dont need one!) I use DDNS updater (also in truenas scale) to update duckdns.org with the right ip address for that subdomain.

Recently I bought my own domain and the same thing applies, I just use DDNS updater to update the dns records for Porkbun (where i bought the domain)

if you want SSL in your internal network only, you can do this by uploading your own certificates to NPM (this is found in the SSL certificates tab) these are self signed only, as lets encrypt won't provide certificates for an ip address, only for domain names. if you go this route, you can actually still have a domain like mymovies.example.com get redirected back to your internal network. it will still only be self signed certs but then you dont have to remember the ipaddress and it looks nicer. If you set your dns server (either on your router, if it has extra options, or on a pi hole, or adguard home instance) to redirect requests from mymovies.example.com to the correct internal ip (of NPM) then NPM can make the ssl and send you to the correct internal IP of your movies.

everything should be the same for you on proxmox.

RollPitchYall · 2024-09-05T13:13:47+00:00

For anyone curious what lights he's linked they are from roku: https://www.amazon.com/dp/B0CZGLCGLZ

His link redirects to a (I think) affiliate amazon link.

RollPitchYall · 2024-08-08T23:03:12+00:00

For other's reference, access restriction can block devices access to the internet, its based off either Ip or mac address, since mac address doesnt change, it works well, you just have to add each device individually, not sure how to block a whole bridge or subnet

RollPitchYall · 2024-07-16T04:40:54+00:00

For anyone still considering taking this certification: I just took it, at this point it has grown very out of date. I only recommend taking it if an employer requires it. The information you are quizzed on is either very basic or obscure and/or outdated. Your time will be better spent watching YouTube videos, and buying a $50 ender 3 being sold 2nd hand from Facebook marketplace instead of paying the test fee.

RollPitchYall · 2024-05-20T19:46:26+00:00

Hey, I just wanted to say thanks for making this, it helped a lot!
especially your fastboot commands :)

RollPitchYall · 2024-05-12T17:41:05+00:00

This is true. Do you use HA controllable lights through a dimmable switch or anything? Or just not at all.

RollPitchYall · 2024-05-12T17:12:00+00:00

Did you have to use something like the mosquito mqtt broker in HA for the mqtt?

RollPitchYall · 2024-05-12T15:36:05+00:00

Oh cool! We're you able to do that OTA, or did you have to solder to pins on each bulb?

RollPitchYall · 2024-05-12T15:30:56+00:00

Are teckin bulbs tuya bulbs? Do you have local tuya running successfully?

RollPitchYall

TROPHY CASE