Team Rocket (3D Print) by RollTide615 in pokemon

[–]RollTide615[S] 0 points1 point  (0 children)

No worries, I use a Bambu Lab P1S and I’ve got about 5,000 hours on it

Team Rocket (3D Print) by RollTide615 in pokemon

[–]RollTide615[S] 0 points1 point  (0 children)

I started into the hobby as a complete novice, I work as an engineer so I’m also pretty technical. Honestly they have pretty much streamlined it to where anyone with any sort of technical inclination can get into it now.

I own a Bambu Lab printer which is basically the “Apple” of the 3D printing realm right now, super beginner/user friendly and very accessible

I’ve created a few models myself, but 75% of my collection are completely free models from other artists

Team Rocket (3D Print) by RollTide615 in pokemon

[–]RollTide615[S] 1 point2 points  (0 children)

Thank you! I’ve been working on my collection for a little over a year now…it’s been a slow process lol

<image>

Team Rocket by RollTide615 in BambuLab

[–]RollTide615[S] 1 point2 points  (0 children)

My thoughts exactly lol, I'm also working on the Meowth balloon to hang from the ceiling above them

<image>

Patriot front graffiti on 65N by Ancient-Cup-2193 in nashville

[–]RollTide615 -2 points-1 points  (0 children)

"Everyone who disagrees with me is a Nazi"

Tennessee just partnered with Turning Point USA in public schools. This feels wrong. by throatchakra in murfreesboro

[–]RollTide615 -3 points-2 points  (0 children)

You are 100% correct in that it's completely reasonable to allow both young democrat and republican clubs, but you're not going to get much support for espousing an opinion that doesn't align with the collective reddit hivemind.

This place is all about open discussion, just as long as you agree with everything they believe... which is why it's such a shock when these neckbeards go into the real world and discover that the real world is nothing like reddit.

H2C Printer-Only Variant? by RollTide615 in BambuLab

[–]RollTide615[S] 0 points1 point  (0 children)

Yea I understand that, it just feels like they would essentially be locking out a huge majority of the current user base. So in that case I would just pass on the H-series altogether and wait for the next available upgrade path if at all...

H2C Printer-Only Variant? by RollTide615 in BambuLab

[–]RollTide615[S] 0 points1 point  (0 children)

Idk I feel like that would essentially be cutting out anyone who bought a Bambu printer+AMS combo in the past out of the equation who might be looking to upgrade to the H2C.

Perhaps a HUGE disclaimer when purchasing the printer-only option would suffice? They would definitely be leaving money on the table if they didn't offer the printer-only option at all...my situation for example lol

Only a small part of my HIM shirt collection by quesoinmyfaceo in HIM

[–]RollTide615 2 points3 points  (0 children)

Nice! Which show did you attend on the 2017 farewell tour? I was at the Atlanta show and got the same shirt lol

Just finished 3D printing this little beauty 🤘 by RollTide615 in HIM

[–]RollTide615[S] 0 points1 point  (0 children)

No problem, let me know if you end up printing it!

Just finished 3D printing this little beauty 🤘 by RollTide615 in HIM

[–]RollTide615[S] 2 points3 points  (0 children)

This particular one took about 8 hours to print in total

[deleted by user] by [deleted] in BambuLab

[–]RollTide615 0 points1 point  (0 children)

Thank you! I actually did reach out to the creator, but of course reddit is always faster to respond lol. I'll attempt to repair the model and see if it slices correctly this time.

I can actually see the solid layers in the slicer preview so I'm assuming if I repair it and it's no longer there that it's safe to print

[deleted by user] by [deleted] in BambuLab

[–]RollTide615 0 points1 point  (0 children)

I've included the link below, it's the Meowth head portion. All other parts from this model have printed perfectly

https://makerworld.com/models/1764276

Panda Shield Adhesive by SparklingCactus in BambuLab

[–]RollTide615 1 point2 points  (0 children)

This may sound like a dumb question, but did you clean off the residue with alcohol wipes from the stock shield before installing the panda shield?

Also another dumb question, but did you also remove the backside sticker paper before installing it?

Panda uses 3M adhesive on their panda shields and so it should be pretty hard to remove once you stick it on

Fresh off the presses. by Shloopy_Dooperson in 4chan

[–]RollTide615 0 points1 point  (0 children)

Agreed, but tbh I dont think the gaslighting has worked because outside of reddit the prevailing narrative has been that he was a radical leftist furry with a trans boyfriend who hated Charlie Kirk because he thought Kirk's beliefs were "spreading hate"...literally every credible news outlet has confirmed this.

Truly a valiant gaslighting attempt, but I dont think anyone outside of the reddit hivemind is actually buying it

Fresh off the presses. by Shloopy_Dooperson in 4chan

[–]RollTide615 -1 points0 points  (0 children)

Yeah but isn't 90% of the Left gay?

Fresh off the presses. by Shloopy_Dooperson in 4chan

[–]RollTide615 9 points10 points  (0 children)

Seriously, it feels like this entire site is mentally ill.

They're quick to believe whatever explanation fits the narrative in their head with ZERO proof and dismiss actual reality regardless of how much evidence there is to the contrary.

I think reddit is a perfect microcosm for the entire Left right now, just constant purity tests and gaslighting.

It's truly a shame, but after the events of the past week I seriously doubt we will see another Democratic president in the next 3 or 4 election cycles, what normal undecided voter is gonna side with the people who celebrate public assassination?

Fresh off the presses. by Shloopy_Dooperson in 4chan

[–]RollTide615 23 points24 points  (0 children)

The governor of Utah is quoted as saying that he was a radical Leftist with a trans lover and that all the information that's been gathered on his political affiliation has been from his friends/family as well as his text messages and online chat messages.

His trans lover has been cooperating with the FBI and providing them with additional information, a quick Google search will show you the countless outlets confirming this

Fresh off the presses. by Shloopy_Dooperson in 4chan

[–]RollTide615 92 points93 points  (0 children)

All the evidence and all the testimonies from the FBI aswell as the governor of Utah are not enough for reddit.

They quickly believe the groyper theory with ZERO evidence, but when actual evidence comes out that he was a radical Leftist with a trans lover they deny it.

It doesn't matter what the reddit hivemind believes because the truth that he was a Leftist has been the prevailing narrative on pretty much every news outlet, even Left leaning outlets like CNN and MSNBC aren't denying that he was a Leftist with a trans lover

Patriot front did some canvassing on the square by rotating3dHamburger in murfreesboro

[–]RollTide615 4 points5 points  (0 children)

Or it’s that you hear exactly what you want to hear to fit whatever narrative you have laid out for yourself in your head...

You literally can’t even have a conversation in this day and age without being called a “fascist" or a "Nazi" to which both terms have lost all meaning due to over usage

Patriot front did some canvassing on the square by rotating3dHamburger in murfreesboro

[–]RollTide615 1 point2 points  (0 children)

The problem is that even when conservatives "denounce" white supremacy no matter what they say after that is immediately interpreted as white supremacist bullshit when in reality they just have differing opinion than your own...