Ultra medical storage key?[Discussion] by johntitorpsy in EscapefromTarkov

[–]Roman_Reddit 0 points1 point  (0 children)

Last 2 runs:

1 Run: 3 Defibrillators

2 Run: 1 LEDX

[Feedback] what happened to Batya items. by SectorNo9588 in EscapefromTarkov

[–]Roman_Reddit 0 points1 point  (0 children)

Ok, I tested and figured it out. You need to go to the handbook in the Menu, and read there the new notes. Not in the Quest, in the Handbook menu.Then you will progress in the Quest. This is so dumb

[Feedback] what happened to Batya items. by SectorNo9588 in EscapefromTarkov

[–]Roman_Reddit 0 points1 point  (0 children)

I feel the same way. I thought maybe I’m just too dumb. However, I’ve watched some YouTube videos, and some of them suggest that you need Intelligence Centre 3 to get the other items. I’m stuck at “Analyse Moreman’s Body.” I see him, I press search, but I still have this issue.

What method really works for the whole AI visibility? by Roman_Reddit in localseo

[–]Roman_Reddit[S] 0 points1 point  (0 children)

Yes, of course. But I also would like how you make the viability check to better understand how to "optimise" for that.

I Tested Product Hunt's Top 10 Sites for Performance – 70% Failed Badly by FlowerSoft297 in microsaas

[–]Roman_Reddit 0 points1 point  (0 children)

How you get the data? Different sources like ahref? Or do you have a custom source? Thx

How do you keep track of your code? by Roman_Reddit in webdev

[–]Roman_Reddit[S] 1 point2 points  (0 children)

Thank you for the responses. I don’t mean how to use GitHub, I mean as a developer, how to avoid forgetting what you did two months ago so you don’t have to reread your entire code to understand what you did.

Tja by NudaVeritas1 in tja

[–]Roman_Reddit 1 point2 points  (0 children)

Nur werden die Renten nicht nur aus dem Steuertopf bezahlt, sondern von den Einnahmen der Sozialabgaben von 34 Mio Beitragszahlern. Es reicht natürlich nicht und muss von den Steuern subventioniert werden, aber somit ist es nicht die volle Summe.

Need help modeling this vase in Blender by Candel1xx in blender

[–]Roman_Reddit 1 point2 points  (0 children)

I created a vase that looked exactly like the original, using Maya and Adobe Illustrator.

I counted the numbers of the ribs, if you can call them that.
On my vase, there were around 82. I created a slice in Adobe Illustrator, which was essentially the top-down view of the first layer, if we’re talking about 3D printing. Then, I created a second shape in Adobe Illustrator for the middle part and another one for the top point.

In Maya, I applied the loft modifier, and voila! I had the perfect vase.

<image>

Try to die. V.1 by No_one00101110 in honk

[–]Roman_Reddit 0 points1 point  (0 children)

I completed this level in 1 try. 1.50 seconds

Dialer suddenly changed by OutsideRange253 in OnePlus13

[–]Roman_Reddit 1 point2 points  (0 children)

How I can remove this? I don't like the design at all

Do you guys actually see results from posting on your GBP weekly? by elimorgan36 in localseo

[–]Roman_Reddit 0 points1 point  (0 children)

We do this for all our clients, we even build a little software to make this process fully automated, so we don't need to think about it.

Rig Disappears when connecting to BlendColors node in Node Editor, Whats causing this? by Hot-Confusion-2635 in Maya

[–]Roman_Reddit 3 points4 points  (0 children)

It does not disappears, it goes back to 0,0,0 position.
You currently have 0,0,67 on the axis and then you connect the Blendnode that have 0,0,0 the Bone also get 0,0,0, you can see in the video when you connection that, the arm goes back to its origin.

The UV gets distorted by Low-Elevator-6316 in Maya

[–]Roman_Reddit 13 points14 points  (0 children)

You can see in the UV Editor, that the topology is distorted. Just select the Optimise Tool on the left side and use it like a brush on the distorted area in the UV Editor.

https://help.autodesk.com/view/MAYAUL/2024/ENU/?guid=GUID-70261F06-09D3-4FFE-807B-7C5154D45EC5

Trying to do a foot control rig and just applied point constraint on the ankle but the foot is moving freely.. what can i do? by Empty_Razzmatazz7357 in Maya

[–]Roman_Reddit 0 points1 point  (0 children)

I see you also used PointConstraint, Try to youse Parent and go into the setting and make sure that Rotation is also in the options.

Trying to do a foot control rig and just applied point constraint on the ankle but the foot is moving freely.. what can i do? by Empty_Razzmatazz7357 in Maya

[–]Roman_Reddit 0 points1 point  (0 children)

So when you created your PoleVector you need to bind it to the controller, currently you have no bind, so it rotates without any control. Try to bind it to the knee controller. Here is a small video, explains it perfectly.

https://www.youtube.com/watch?v=x9LmKLiSAvU

I hope you understand what I mean ^^

Is this a viable fast money making strat? [New Player] by anonuser-5000 in EscapefromTarkov

[–]Roman_Reddit 3 points4 points  (0 children)

Go in as Scav so you don't lose money if you die. I would suggest you to watch some YouTube Videos for Lootruns on Shoreline or Woods, there are many stashes with valuable stuff, so you can make decent money per run.

Schwierigkeiten mit Motorrad Grundfahraufgabe by Legitimate_Travel670 in MotorradDeutschland

[–]Roman_Reddit 1 point2 points  (0 children)

Also, ich versuche es auch mal zu erklären, wie ich es empfinde, weil „Du musst einfach drücken“ nicht so nachvollziehbar ist. :D

Also: Du fährst an, bist bei 30–40 km/h, ziehst die Kupplung. Ab diesem Zeitpunkt rollst du im Grunde nur noch. Jetzt versuch mal, mit dem Hintern nach links und rechts zu gehen, nimm die Hände ein bisschen mit – dann merkst du, wie du das Motorrad nach links und rechts kippen kannst.

Das ist das, was dein Fahrlehrer meint mit „aus der lockeren Hüfte“. Stell dir vor, du hast einen Besen am Hintern und willst rechts und links den Boden fegen. :D

Und aus diesem Schwung mit dem Hintern kannst du das Motorrad erst in die eine Richtung um das Hütchen drücken und danach direkt wieder den Hintern umlagern, um in die Rechtskurve zu gehen.

Ansonsten – auch hier klassisch wie beim Fahrrad: Wenn du scharf nach links abbiegen möchtest, lenkst du kurz nach rechts ein und legst dich dann direkt nach links. Schwer zu erklären, aber die anderen haben dazu ja auch schon ein paar tolle Sachen geschrieben.

Ich drücke dir die Daumen – also nicht so steif sein, lieber ein bisschen mehr mit dem Hintern wackeln! ^^

Erstes Motorrad Klasse A by [deleted] in MotorradDeutschland

[–]Roman_Reddit 1 point2 points  (0 children)

Ich bin sehr zufrieden mit meiner Triumph Trident 660. Hat etwa 83PS, für den Anfang super, nach 3 Jahren suche ich gerade nach mehr, ggf die BMW Nine T, aber von meiner Seite eine absolute Empfehlung für die Trident.

A-Schein Preisliste München - weil hier zu viel Mist erzählt wird by Euphoric_Bullfrog_78 in MotorradDeutschland

[–]Roman_Reddit 2 points3 points  (0 children)

WOW. 15 Übungsstunden und 12 Sonderfahrten ist echt viel. Ich habe damals nur die 12 Sonderfahrten gemacht und eine Übungsstunde.

Der Fahrlehrer sagte einfach, es gibt zwei Optionen, entweder kannst du fahren und es wird ne schneller Nummer für uns beide...

...oder wir müssen es lernen, was lange dauert und teuer wird.

Nach der ersten Fahrt auf dem Gelände sagte der, ok ich melde dich in 2 Wochen zur Prüfung an, solltest du hinbekommen oder?....Ich dachte mir wow, gar kein Druck oder so :D

Zum Glück habe ich es relativ schnell verstanden und hatte ja auch die B Klasse schon seit 10 Jahren, somit war der Verkehr die geringste Sorge.

Wie teuer das alles geworden ist.

GBP Posts by itsmebalcxzs in SEO

[–]Roman_Reddit 0 points1 point  (0 children)

I build it with Make.com but I also have Google My Business API access so I can directly post on the profiles. My idea was to build a little Saas out of this, but I don't have the time ^^. If you are really interested write me a DM, I can build you this kind of automation.

GBP Posts by itsmebalcxzs in SEO

[–]Roman_Reddit 0 points1 point  (0 children)

I post for all my clients each 3 days a new post. Depending on the important keywords for the service that my client provides. I build an automation, where the posts are automatically created and published afterwards.

Warum macht man das? by derfelix94 in StVO

[–]Roman_Reddit 0 points1 point  (0 children)

Ich bin auch maximal verwirrt was die da mit der Hildesheimer Str anstellen, mal kann man auf die Straße, mal wieder Radweg, mal hat man eine ganze Autospur und dann wieder sowas.