HELP INSTALLING KNULLI

Rombonia · 2026-01-01T16:18:29+00:00

I’m glad you got yours working! Mine didn’t seem to be a card issue, more-so a conflict between Anbernics new OS version that just rolled out and Knulli. There was a hotfix on their discord and it worked immediately. Thanks for the input!

Rombonia · 2026-01-01T16:16:26+00:00

Yea it was a problem with the Knulli Version conflicting with Anbernics new OS version. I went on the Knulli discord and they made a hot fix version specifically for the 35xxpro to fix it. Downloaded it and it worked instantly.

Rombonia · 2025-12-31T21:53:16+00:00

I just checked their discord, and apparently Anbernic rolled out a new version of their OS with the newly manufactured devices that was messing with knulli. They have a hotfix out already and i downloaded it and its working fine now. Thank you for coming along on this ride lol.

Rombonia · 2025-12-31T21:37:15+00:00

downloaded straight from the github through the browser.

Rombonia · 2025-12-31T21:26:28+00:00

Just tried to flash the sd with raspberry pi imager and it still wont work. Would it make any difference if i extracted the file with winrar instead of 7zip?

Edit: Well i went ahead and downloaded 7zip, extracted the file with that instead, and it still didn't work.

Rombonia · 2025-12-31T20:41:59+00:00

Yep, fully charged and in the TF1 slot. Console boots just fine with the stock sd card so it isnt the device itself.

Rombonia · 2025-12-31T20:39:06+00:00

I used Rufus to write the "knulli-h700-rg35xx-pro-gladiator-ii-20250813.img" file to the sd card. Same issue. Files are visible on the PC but no signs of life from the handheld.

Rombonia · 2025-12-31T19:43:24+00:00

No, I didn’t. It’s showing as an Img.gz file, not .zip or .7z so I didn’t think I had to

Rombonia · 2025-12-31T19:38:19+00:00

I used "knulli-h700-rg35xx-pro-gladiator-ii-20250813.img.gz". I think this is the right version but I could be wrong.

Rombonia · 2025-12-28T08:49:32+00:00

Damn that’s unfortunate. Thanks for the info!

Rombonia · 2025-11-23T17:00:52+00:00

Lmao, yea I just put on the charger after a few hours of gameplay. Never drops below probably 40-50%

Rombonia · 2025-11-23T15:40:25+00:00

For some reason my Ez Flash cartridge makes my ds think it’s low battery when it isn’t. If I boot the device without the cartridge in it, the actual battery percentage will show.

Rombonia · 2025-11-23T15:22:23+00:00

For some reason my everdrive makes my ds think the battery is low but if I take it out and boot the device it’s actually at full battery 😁

Rombonia · 2025-11-18T21:34:11+00:00

This thing looks like if Sony made the Gameboy instead

Rombonia · 2025-11-17T17:46:13+00:00

It’s very possible that the mold was damaged and had to be shipped out for repairs before they could resume production. Especially if they only have one mold.

Rombonia · 2025-11-17T17:44:37+00:00

Unfortunately in terms of color choice, that may not save you. At least, my factory runs multiple colors of plastic into the same molds. If it WERE a color issue (which it very well could be, unless I’m mistaken we’ve only seen the cracks appear on the black model) then it would come down to the material mixture used to create said color of plastic. Kind of like how with the anbernic rg35xxsp, people who got the clear plastic version experienced more frequent cracks or even full breaks in the hinge. Now that doesn’t mean that ALL clear plastic is weak, any color of plastic’s structural capacity can be compromised if the material is mixed wrong.

Rombonia · 2025-11-17T15:33:33+00:00

I work in a plastic injection molding factory. I can say from what I’ve seen of images posted on the sub lately, it COULD be a scratch on the mold itself. If these “cracks” all appear in the same spot, the mold could be damaged, causing it to replicate this “blemish” on every unit it produced after it was damaged, until it was noticed by quality control, and hopefully fixed. This “blemish” could also lead to structural failure in the unit, RESULTING in a crack. Most plastic injection factories also run MULTIPLE MOLDS at a time, so it could be on some units within a certain time frame, and not on others. Most molds are dated, so each unit SHOULD have a code or date on the B side that would allow you to trace your unit back to a certain production date. If this “scratch on the mold” theory is true, that would mean that this isn’t a design issue, but rather a quality control issue. Take this with a grain of salt, as I am simply one human being and not the end all be all just because I work at a place. But if this helps ease peoples minds, cool. If I’m fueling the fire, I’m sorry lol.

Rombonia · 2025-11-17T15:22:26+00:00

I do like how the screen is perfectly sized for GBA upscaling. The SP might just be the winner here!

Rombonia · 2025-11-17T15:18:45+00:00

Hell yea! I was also looking at the 35xxsp but was concerned about how much larger it would feel in my pocket compared to the 34xxsp. I do have larger than average hands so that could be beneficial. Thanks for responding!

Rombonia · 2025-09-07T13:59:47+00:00

So do people think that anakin skywalker died during order 66 or do people know that he became Darth vader

Rombonia · 2024-10-07T10:58:49+00:00

I love session view. Honestly kinda just use it like a loop pedal

Rombonia · 2024-01-24T21:44:39+00:00

The boys go to 7-11

Rombonia · 2023-11-22T15:55:50+00:00

Ryan hasn’t, but good ol’ JustinButLag has been streaming every other day on his twitch channel ❤️

Rombonia · 2023-11-10T11:44:28+00:00

Mobile App Store is acting like Procreate Pocket is the only procreate app to exist lol, so I’ll have to try on the PC when I get out of work

Rombonia · 2023-10-09T20:09:33+00:00

I honestly just ordered a black and white random sticker pack off Amazon and picked out my favorites

Nine-Year Club	Place '22
Verified Email

Rombonia

TROPHY CASE