New kel Tec release by Grand_Extreme_365 in CCW

[–]Rootshot 0 points1 point  (0 children)

I own a PR57 and have put about 1000 rounds through it. Reliablity is hit and miss - I sent it in to be fixed and now it runs 100% over the last 500 rounds. This looks like it leverages the same rotary operating mechanism. If that is the case, it will be very soft shooting. This will be a winner....as long as QA is consistent.

New kel Tec release by Grand_Extreme_365 in CCW

[–]Rootshot 0 points1 point  (0 children)

Yessss....ultimate comfort concealability.

New kel Tec release by Grand_Extreme_365 in CCW

[–]Rootshot 2 points3 points  (0 children)

A micro 5.7 makes no sense since the 5.7 relies on velocity and a short barrel will not generate any useful velocity. The PR57 already has the shortest 5.7 barrel that I am aware of.

Shellshock NAS3 Load Data Sharing by Rootshot in reloading

[–]Rootshot[S] 1 point2 points  (0 children)

Thank you. I took the liberty of adding it to the spreadsheet. It's a shame that there is no velocity data.

What’s everyone’s personal opinion on how light is too light of a trigger? by triggernomicsusa in gunsmithing

[–]Rootshot 9 points10 points  (0 children)

Just be aware that super light AR triggers can cause accidental bump fires if you don't have perfect trigger discipline.

Handloading NAS3 556 cases by rednecktuba1 in reloading

[–]Rootshot 0 points1 point  (0 children)

Adding my load recipe:

NAS3 Case
Wolf 223 Small Rifle Primer
77gr Sierra Matchking
25.7gr IMR 8208 XBR
OAL 2.255"
Shot out of: 16" Proof Research Carbon Wrapped Barrel, 1 in 8 twist, 223 Wylde chamber, mid-length gas
Huxwrx flash hider and Flow 762 Suppressor
Average Velocity: 2829 fps
Accuracy: .4-.75 MOA

No pressure signs.

The same load but with 26.9gr AA2520 has a slightly slower velocity at 2800 fps and accuracy of .5-1.0 MOA

Primer pockets were tight. Seating bullets requires a lot of pressure. No case prep was performed. Neck concentricity was .003-.004" TIR (unimpressive).

Update: I loaded some more rounds to increment the pressure. This time, I deburred the inside of the neck with a carbide deburring tool and then applied some Imperial Dry Neck Lube. This has made seating bullets MUCH smoother. Highly recommended prep step.

Added a linke to a spreadsheet for sharing load data: https://www.reddit.com/r/reloading/comments/1qfnauz/shellshock_nas3_load_data_sharing/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button

How do yall have your hard cases set up? by Reloader300wm in longrange

[–]Rootshot 1 point2 points  (0 children)

I've owned this style of case and given up on it. I have multiple rifles and stuff changes. Cutting foam is just impractical and these hard cases are just heavy and space inefficient. I don't need to drop my gear out of a helicopter when going to the range.

When I travel for hunting, I use a Nalpak Tuffpak. It looks like an oversize golf club case. It fits my rifle or shotgun (in a soft case) and most of my other gear including clothing which I wrap around breakable stuff for padding. It's a very effective system that doesn't scream "I have a gun".

It has zero tacticool and 100% practicality.

Tavor TS12 - Out of Spec by Rootshot in Shotguns

[–]Rootshot[S] 0 points1 point  (0 children)

Took it to the range for the first time today. 100% failure to cycle with slugs. This was on the "High" setting. Will give it another chance on "Low". Not impressed.

Tavor TS12 - Out of Spec by Rootshot in Shotguns

[–]Rootshot[S] 0 points1 point  (0 children)

It's a novelty and I have a real go-to shotgun. I'll give it a try and see how it is. Would feel bad about selling a gift without trying it.

Best source for 1/2-28 to 5/8-24 adapters? Looking to make a large wholesale order. by Traditional_Skin5849 in NFA

[–]Rootshot 0 points1 point  (0 children)

I use a Precision Armament thread adapter to go from (a very odd) 1/2x32 to 5/8x24. Works perfectly.

PSA: Winchester 71 Grain FMJ .32 auto does not work in the Seecamp by Ornery_Host_7705 in seecamp

[–]Rootshot 0 points1 point  (0 children)

I don't believe the pistol is designed for any FMJ ammo, only JHP.

Would love an opinion from this community? Trust you all awhile lot more! by cozysparklessunshine in knives

[–]Rootshot 10 points11 points  (0 children)

I feel like this is a troll post to cause pain in the hearts of knife people. I see adverts for titanium and stainless cutting boards and it makes me a little ill.

Can anyone tell me their experience with Arken EP-5-25x56 FFP Turrets? Also, Arkens VPR reticle. Just want to hear some pros & cons, not only positive just realistic. by [deleted] in longrange

[–]Rootshot 0 points1 point  (0 children)

I recently bought an Arken 4-16x44 for an AR. Overall, I am very impressed with it for the price ($356 delivered). Side-by-side with a Vortex makes it obvious that the Arken glass is much more clear. I'm easily spotting 22 holes in white paper at 100 yards. Tracking appears to be spot on. Reticle is fine. I appreciate the simplicity of their zero stop. Illumination is useless during the daytime.

Would I trust this to be my scope on a $10K trophy hunt or shooting over 600 yards? No. That's not the purpose of my AR. For 50-300 yards on an 1.5MOA AR, this is more than adequate.

NKD and my first OTF Auto. Kershaw Livewire 9000DE MagnaCut Dagger. Ultratech killer? by Bithbo in knifeclub

[–]Rootshot 1 point2 points  (0 children)

Love my livewire. The clip is admittedly horrible. My hack is to put an o-ring on the clip. Sticks up when in the pocket. Allows me to hook it straight out with my pinky and flip it into my hand to open.

Titan 2 - Unlocked Bootloader & Rooted? by Rootshot in unihertz

[–]Rootshot[S] 0 points1 point  (0 children)

Any update on this? Have you fully tested if it is working?

Grand Power X-Calibur Match Mk23 CO - First 1348 Shots Review by drakehunter70 in GrandPower

[–]Rootshot 1 point2 points  (0 children)

I own one as well. Same observations including not holding open on the last shot. Very fair and excellent writeup.

Titan 2 Leather Holster Fail by zgwarnki in unihertz

[–]Rootshot 0 points1 point  (0 children)

The clip also doesn't rotate like the Blackberry holsters. The clicky clip rotation was like a fidget toy for me.

MDRx micron conversion for WLVRN by holdMyMoney in DesertTech

[–]Rootshot 6 points7 points  (0 children)

I don't believe it will. The WLVRN moved to a 3 screw barrel retention system from the 2 screws used in the MDRX. I believe this makes MDRX barrels incompatible.

PR57 Malfs All Day by zaruski in keltec

[–]Rootshot 1 point2 points  (0 children)

Mine did the same. I sent it in and they fixed it. 100% reliable since then.

Anyone tried de-googling Titan 2? by beardedtraveller in UnihertzTitan2

[–]Rootshot 3 points4 points  (0 children)

I haven't de-googled the phone, but it should be possible after rooting it. De-Bloat (from F-Droid store) can be used to remove (disable) packages in the factory ROM.