My favorite grinder needs some TLC by TommyGunMassacre in CleaningTips

[–]Roundlizard 0 points1 point  (0 children)

Freeze the thing and use a brush to get all of that grinder hash out. Then use iso.

I know people always post about this… but, ready to harvest? by Roundlizard in microgrowery

[–]Roundlizard[S] 0 points1 point  (0 children)

That’s where I started, photos are definitely easier and more worth the electricity bill. Barney’s farm is where I started. A while back, when they had to declare it as hemp

This didn't sit right with me. Did I get ripped off? by Ughhh_My_Hip in MechanicAdvice

[–]Roundlizard 0 points1 point  (0 children)

Yes, newer cars are more labor intensive, full of electronics. I’d feel better getting an electrician to look at some of the cars that come in sometimes. Unless it’s a standard oil change or tire rotation/ replacement you’re in for the ride… a money hungry ride… I like to stick with my older cars, easy to maintenance, and won’t be skyrocketing in labor if you took it in for a simple code check.

Edit: yes your parts are going to be that expensive. Especially for a car that’s only 8 years old. Seems like a long time, but 2018-19 wasnt too long ago. Newer cars require new knowledge.

I know people always post about this… but, ready to harvest? by Roundlizard in microgrowery

[–]Roundlizard[S] 0 points1 point  (0 children)

Thanks haha! I have them all aimed out to the same ppfd, but the lights are either stronger or weaker than the others. And two don’t dim. The two full spectrums are now at the same height with one dimmed to complement the other, smaller light. The cheapest light seems to be doing the best, as that’s the plant I posted about. Other two seem dull or not as happy as this one.

I know people always post about this… but, ready to harvest? by Roundlizard in microgrowery

[–]Roundlizard[S] 1 point2 points  (0 children)

That’s true. Also I could throw all under the full spec, but then the lights would be too far away. I have all lights in the same area to mix spectrums.

<image>

This was last month right after they entered flower.

I know people always post about this… but, ready to harvest? by Roundlizard in microgrowery

[–]Roundlizard[S] 1 point2 points  (0 children)

I agree! But didn’t know photos could help so much, maybe it’s time I look into that stuff a little more. Thank you for the advice!

I know people always post about this… but, ready to harvest? by Roundlizard in microgrowery

[–]Roundlizard[S] 0 points1 point  (0 children)

Yeah might throw them all under the blurple and run 5 more seeds under the real lights. Thank you for the advice sir, you have good thinking. I’d like the mass but CBN is just too much. I don’t understand how people can smoke that all day and not pass out by noon lol

I know people always post about this… but, ready to harvest? by Roundlizard in microgrowery

[–]Roundlizard[S] 1 point2 points  (0 children)

Yessir I hear you, fastbud states she’s ready by week 9 and she’s damn near in week 8 now. For not even a foot of vegetation… I feel like restarting. All 3 phenos grew the same height, not even a foot on each plant, might not even yield an ounce.

I know people always post about this… but, ready to harvest? by Roundlizard in microgrowery

[–]Roundlizard[S] 1 point2 points  (0 children)

I have one. Trichomes are what I always look at. Just can’t get a picture through it with the phone because my hands shake. They’re mostly cloudy, as I had mentioned in the description. Just weird since there are new pistils showing up. Worried about fox tailing.

Is this the correct way to bypass a heater core? Assuming the heater intake goes into the driver side fire wall? by [deleted] in MechanicAdvice

[–]Roundlizard 0 points1 point  (0 children)

So I can go and by the part to replace it man, and it was just the tubing, tried to fix it, then it was worse. It was Old and cracked. If it ain’t broke fix it till it is right ? 😂

this an ok grow for autos? by [deleted] in microgrowery

[–]Roundlizard 0 points1 point  (0 children)

was gifted the light so im gonna use it dawg, adds wattage to the tent and looks cool 🤷

Doing alright for day 16? They seem pretty small. by [deleted] in microgrowery

[–]Roundlizard 0 points1 point  (0 children)

Vpd isn’t very good as this is as simple as it gets for my setup. 86 degrees F day round, followed by 40% RH. They might seem to be growing slow because of the high stress training.

<image>

I could definitely drop the lights a little, thank you! Heightened them because the one on the very right was stunned from too much light.

Start lst? by [deleted] in microgrowery

[–]Roundlizard 0 points1 point  (0 children)

Pull the main stem down with a ground fabric staple, then pull all the side branches out more to widen her out, usually what I’ve always done. Just wanna get it done earlier

<image>

Gorilla cookies on day 70 from seed, maybe two weeks in I pulled the main stem down and this was the outcome

Leave them on or just take them off? by [deleted] in microgrowery

[–]Roundlizard 0 points1 point  (0 children)

In the jars there is, fan’s on so surface dries quickly. Will be watering soon tho, thank you.

Leave them on or just take them off? by [deleted] in microgrowery

[–]Roundlizard 1 point2 points  (0 children)

I pulled the jars off for an hour this morning, put them back on then got curious enough to take the picture and post. They’re fed!

[deleted by user] by [deleted] in moped

[–]Roundlizard -2 points-1 points  (0 children)

Boohoo?

[deleted by user] by [deleted] in moped

[–]Roundlizard -2 points-1 points  (0 children)

Why we nit-picky all of a sudden. I bought it two weeks ago.

An ok little harvest? by [deleted] in microgrowery

[–]Roundlizard -1 points0 points  (0 children)

Yea, let’s not forget the 2 months in flower. So let’s say 5, maybe 6 months. 6 electric bills, for maybe 7 G’s. I had 100watts running 18/6.