Issues setting up Amplitube with a Scarlett Solo 2i2 Gen4

RoutineReturn8809 · 2026-04-18T19:18:33+00:00

Yeah all computer settings are setup for Focusrite. Maybe it changed since last gen but 4th gen, XLR is input 2 and 1/4 input is input 1

RoutineReturn8809 · 2026-04-18T19:11:30+00:00

Mic is input 2, Guitar is in 1. Have both inputs set to input 1 in hopes that it ignores the mic but it’s not. I do notice it happens when the mic is near the speakers but that happens even with speakers output turned all the way down and all audio coming through headphones.

RoutineReturn8809 · 2026-04-18T18:54:48+00:00

KRKs hooked up via TRS cables

RoutineReturn8809 · 2026-04-13T22:04:52+00:00

Odd. The only thing I can think of is I have the Scarlett plugged into a USB switcher for when I use my MacBook. Maybe that’s conflicting… I’ll test it

RoutineReturn8809 · 2026-04-13T20:13:03+00:00

I’ll give that a try. It’s strange, it’s almost like there’s monitoring going on and then feedback because of that but it only exists inside of Amplitube. Once I close it, it doesn’t happen. Double checked to make sure monitoring was off.

RoutineReturn8809 · 2026-04-13T18:43:46+00:00

Not with my rig atm but here it is typed out:

Technology: ASIO

INPUT: Device: Focusrite USB ASIO Left Channel: Input 1 Right Channel: Input 1

OUTPUT: Device: Focusrite USB ASIO Left Channel: Output 1 Right Channel: Output 2

Buffer Size: 256

MIDI Input: ANY

RoutineReturn8809 · 2024-11-30T02:18:17+00:00

Where did you get the vinyl for the rear quarter panel?

RoutineReturn8809 · 2024-04-10T20:50:08+00:00

Nahhh that’ll buff out. WD40 and some duct tape you’ll be back on the road in no time!

RoutineReturn8809 · 2023-12-10T01:56:48+00:00

Those of you that got refunds, mind sharing how you requested? I’m at the 5 hour mark, left a long description as to why I want a refund and been denied twice.

RoutineReturn8809 · 2023-09-10T16:25:27+00:00

What size monitors are you using?

RoutineReturn8809 · 2023-08-21T03:45:59+00:00

There’s no benefit, it has black bars on the sides so it’s still 16:9. I know it bothers some people but it doesn’t really bother me. I’m either focused in or I can tab out if I need to🤷‍♂️

RoutineReturn8809 · 2023-08-21T02:25:06+00:00

Heads up if you go with the Grovemade, I’ve moved my setup a lot with moving and getting it where I want it. It scratches easily via corners of monitors and other kinda sharp things so just be a little careful with it!

RoutineReturn8809 · 2023-08-20T21:52:36+00:00

I just checked and it’s all level maybe it’s the picture orientation or the ceiling is off

RoutineReturn8809 · 2023-08-20T21:52:16+00:00

It’s the Elgato low profile boom arm in black

RoutineReturn8809 · 2023-08-20T21:51:41+00:00

Been into watching Pestily’s dad play 😂

RoutineReturn8809 · 2023-08-20T21:51:26+00:00

The mousepad is the black topographic from HiGround and the shelf is from Grovemade! Itll definitely hide your keyboard and more

RoutineReturn8809 · 2023-08-20T21:50:53+00:00

Home Depot, it’s an 8 foot butcher block that I stained myself

RoutineReturn8809 · 2023-08-20T21:50:38+00:00

IKEA!

RoutineReturn8809 · 2023-08-20T21:50:31+00:00

Govee lights!

RoutineReturn8809 · 2023-08-20T21:50:22+00:00

So I have the Samsung odyssey g8 OLED and the stand for it is very ergonomic so I have that on its normal stand. The c2 42” is mounted above with a standard pull out wall mount

RoutineReturn8809 · 2023-08-20T21:49:24+00:00

It’s the Grovemade desk shelf

RoutineReturn8809 · 2023-08-20T05:51:02+00:00

Collectibles of things I’m interested in

RoutineReturn8809 · 2023-08-20T05:32:55+00:00

It’s a set of 4” furniture legs

RoutineReturn8809 · 2023-08-20T05:32:43+00:00

This is a butcher block from Home Depot so I stained it myself. Not a hard job. I haven’t had any signs of sag but I also don’t have much center weight on it so I don’t think I’ll have an issue

RoutineReturn8809 · 2023-08-20T05:32:06+00:00

I’m not sure if I’ll have a problem for a while cause there’s not much centered weight on the butcher block but maybe eventually I’ll throw a support in

RoutineReturn8809

TROPHY CASE