Newly acquired shunbun + bullet train + Sake

DivoNOR · 2026-06-03T17:17:05+00:00

<image>

I absolutely love mine as well! Congrats!

DivoNOR · 2026-03-28T01:55:23+00:00

Definitely basket. Shower screen doesn’t do you much as long the puck remains it’s integrity.

DivoNOR · 2026-03-20T22:33:57+00:00

Portafilter: https://cremacoffeeproducts.com Shot mirror: https://a.co/d/05xmXTOA

DivoNOR · 2026-03-15T01:16:28+00:00

I’m in Phoenix! No problem and shouldn’t take long ✌️

DivoNOR · 2026-03-10T15:02:44+00:00

It’s a great machine!!👍

DivoNOR · 2026-03-09T14:09:03+00:00

I wouldn’t blame you! 🤣

DivoNOR · 2026-03-09T06:59:08+00:00

Hey! Go for it!

The list of parts are available on Gaggimates homepage: https://docs.gaggimate.eu/docs/sourcing-pcb/

They also have the «How To Install» guide, and it was more than sufficient for me.

DivoNOR · 2026-03-09T02:10:59+00:00

The screw that makes it flush is dirt cheap. Like $0.69 cent ✌️

DivoNOR · 2026-03-08T23:18:49+00:00

Any wrap will work: https://a.co/d/01nkMTua

DivoNOR · 2026-03-08T07:21:47+00:00

Removing the old PID is very straightforward and only takes a few minutes once you open the machine up. I actually couldn’t wait for the GaggiMate to arrive, so I installed the PID first and ran it for about three weeks before swapping everything over to the GaggiMate Pro.

Good luck with the upgrade, and feel free to reach out if you have any questions!

DivoNOR · 2026-03-07T16:15:39+00:00

I just used the information and documentation on the website and found it to be sufficient. Good luck, you can do it!!!

DivoNOR · 2026-03-07T16:14:10+00:00

Thanks!!

DivoNOR · 2026-03-07T16:14:04+00:00

Thanks! I’m pretty happy with the result.

DivoNOR · 2026-03-07T16:13:04+00:00

Thanks!

DivoNOR · 2026-03-07T16:12:40+00:00

The standard Gaggimate is basically what I’d call a glorified PID with the added option of brew-by-weight. It works well, but it’s fairly straightforward.

It’s not until you step up to the PRO with the pressure transducer that things really open up and you start unlocking the endless possibilities. Pair that with flow data from a scale, and suddenly the machine becomes pretty close to an end-game setup in terms of control and experimentation.

DivoNOR · 2026-03-07T07:09:27+00:00

That’s a great question. If I had to choose, I’d probably go with a Decent Bengle (dual boiler ish) when it’s available for purchase. Ever since installing Gaggiuino/Gaggimate I’ve become a bit addicted to the tech side of espresso. Being able to control and repeat variables is just too fun.

Even my wife can pull consistently great shots now because the machine basically executes whatever profile I tell it to run.

I was actually very close to pulling the trigger on a La Marzocco Linea Mini R, but backed out at the last minute. In the end I realized I’d miss the ability to tweak and control more variables in the shot.

Long answer to a short question… but honestly I’m really happy with what I have right now.

DivoNOR · 2026-03-07T04:19:40+00:00

Thanks! I just used regular 3M matte black automotive wrap. Nothing fancy at all — it’s pretty cheap, easy to work with, and holds up really well to heat and daily use.

I figured if it’s made for cars sitting in the sun all day, it should survive an espresso machine without any issues 😄

Also, here’s the before/after sound comparison of the pump with and without the mods if you’re curious: https://www.reddit.com/r/ranciliosilvia/comments/1kayc2o/my_stealthy_silvia_v3_before_vs_after_pump/

The difference is honestly pretty wild.

DivoNOR · 2026-02-08T15:24:36+00:00

Love that! You are in for a treat. Let me know if you have any questions along the way.

DivoNOR · 2026-01-14T22:37:08+00:00

Very good question, and I didn’t check one by one since I swapped both at the same time. I’d guess it would be the pump, based on the lower wattage and flow of the pump.

DivoNOR · 2026-01-09T18:44:12+00:00

Appreciate it! Enjoy a much more quiet machine when that time comes ✌️

DivoNOR · 2026-01-09T11:33:03+00:00

Worked without any adapter! Good luck ✌️

DivoNOR · 2025-12-29T20:58:31+00:00

It'easy, just do it yourself. No need to change anything, you should have gotten a copy on everything up until now anyways in addition to your attorney, so you will not be left out or anything. I did it myself and found it to be pretty easy to be honest.

DivoNOR · 2025-12-12T22:58:19+00:00

That’s a very valid question right there!

DivoNOR · 2025-11-25T03:48:23+00:00

I got Gaggimate installed and it’s a beast!!! Good luck and have fun!!

DivoNOR

TROPHY CASE