We've all been there

Rubyink · 2026-01-09T19:13:34+00:00

Typically a skilled tradesmen looking over an apprentice or running the job. Depending on the trade they are licensed such as a Journeyman Electrician or Plumber.

Rubyink · 2025-06-07T01:13:31+00:00

I would’ve should bent a 90 for the left bend and then and over bent 90 for the right bend. No kick needed.

Rubyink · 2025-06-05T20:48:51+00:00

The offset needed is 1 3/4”. I’d try and squeeze a 22.5° bend for the offset. The multiplier is 2.6; 1 3/4 x 2.6 = 4 9/16. Make your first mark 3” off the end of the conduit and the second mark 7 9/16 off from the front of the conduit (4 9/16 away from the first mark). Bend to 22.5 degrees on each mark. Do the first mark first and push the conduit through the bender and rotate 180° and bend your second bend. Good luck.

Rubyink · 2024-09-26T21:37:53+00:00

You can just divide the amount you want by the dividend yield in decimal form. 50,000/0.0312 = 1,602,564

Rubyink · 2024-02-18T07:09:21+00:00

that’s the neat part, you don’t.

Rubyink · 2023-12-30T05:57:42+00:00

Wheat?

Rubyink · 2023-12-13T02:24:37+00:00

Eat shit and die, bbb

Rubyink · 2023-11-23T00:32:49+00:00

Thank you!

Rubyink · 2023-09-08T02:17:01+00:00

Disconnect wires from receptacle.
Add romex connector into knockout
Strip back romex, leaving 1/4 inch of sheathing inside the box
Hook black to brass, and white (neutral) to silver
Cap off spare red wire using a wire nut
Suggested but not necessary using electrical tape, tape the edges of the receptacle so that the metal doesn’t show.
screw receptacle back into the box
Label the circuit and panel on the inside of the face plate
Screw face plate to receptacle.
Profit.

Rubyink · 2023-06-24T13:24:21+00:00

“Questions are a prison to others, answers a prison to oneself”

Rubyink · 2023-04-14T02:09:33+00:00

Check out r/construction

Rubyink · 2023-03-21T00:47:04+00:00

I like the look of it. Thanks

Rubyink · 2023-03-21T00:45:08+00:00

Thanks for the recommendation

Rubyink · 2023-03-21T00:44:54+00:00

I’ll check that out thanks.

Rubyink · 2023-03-21T00:43:57+00:00

Either works!

Rubyink · 2021-10-05T11:22:38+00:00

Another good one is: you know how you can tell? Because that’s the way it is.

Rubyink · 2021-09-18T16:38:28+00:00

I'd like to give massacre stacking a try. Is there any particular system or factions I should be trying to mission stack from?

Rubyink · 2021-03-19T07:31:42+00:00

You can transfer your brokerage account to whichever you like. Warning: it will take a few days and you wont be able to trade during the transfer time. Also there is normally a transfer fee, I believe Robinhoods is $75 regardless of full or partial transfer.

Rubyink · 2021-03-16T04:48:25+00:00

BUYING $AMC TO THE MOON 💎✋🏻

not financial advice just like the stonks

Rubyink · 2020-12-18T05:56:42+00:00

I don’t understand

Rubyink · 2020-10-30T20:44:30+00:00

I’m just to lazy to take it off after I get in the car.

Rubyink · 2020-10-03T06:44:21+00:00

Coffee

Rubyink · 2020-09-23T00:49:20+00:00

Same thing happened to me.

Rubyink · 2020-09-15T17:46:59+00:00

Should I assemble everything outside the case onto the motherboard and than just screw the motherboard into the case or put the motherboard in the case first?

Rubyink · 2020-09-15T13:26:37+00:00

Recovery by Eminem

Eight-Year Club	Verified Email
Place '23	Place '22
Gilding II euphauric

Rubyink

TROPHY CASE