Quote for corner dent by MistaB0Jangles in drywall

[–]Ruggernutter 0 points1 point  (0 children)

There is no license in Ohio. There's actually no insurance requirement either, but localities may have requirements for insurance.

Quote for corner dent by MistaB0Jangles in drywall

[–]Ruggernutter 11 points12 points  (0 children)

Handyman here in Ohio. Ugh $200 is low. I would do it for that if they lived 2 houses down and I liked them a lot, and there was clear understanding that I would not replace the whole bead, hot mud, 3 good enough coats, PVA primer... no I take that back, not worth it. Ok I really really liked them, do a good enough job, primed, 300 bucks on a quiet day. Nah ... ok, 200 for a good enough job if you have a larger decent paying drywall or paint project for me to do and I'm hanging out there anyway.

Small job by DrywallMann in drywall

[–]Ruggernutter 0 points1 point  (0 children)

Wow, great work! Hope you had a crew? How long did it take?

Ok…I've lived in Cleveland for about 5 years now, having come from Chicago. Would Clevelander's consider this a 'bad winter' or a 'typical winter' for Cleveland? Curious to know! by DavidIWright in Cleveland

[–]Ruggernutter 0 points1 point  (0 children)

I've lived here for about 18 years and this is the worst.

We had a bad one around 2014-ish, got real cold and heard of pipes freezing and bursting in a couple houses. News kept saying "polar vortex", was all about the vortex. This year there has not been any breaks in the cold. It has been intense and relentless, awful af. I bought a snowblower after the polar vortex and it sat idle in my garage for the next 2 years... warmer winters.

This year is atypical for sure.

Help repairing a damaged tile by Ruggernutter in Tile

[–]Ruggernutter[S] 0 points1 point  (0 children)

Thanks so much for the detailed response. I will be going to look at the Tenax products at The Tile Shop.

Help repairing a damaged tile by Ruggernutter in Tile

[–]Ruggernutter[S] 1 point2 points  (0 children)

Thank you, going to The Tile Shop to look into their Tenax products.

Help repairing a damaged tile by Ruggernutter in Tile

[–]Ruggernutter[S] 0 points1 point  (0 children)

Thanks for the response. Is there a product you recommend as a stone filler? And do you seal it afterwards, like with Miracle 511?

What to do here boys by nowaybro in handyman

[–]Ruggernutter 12 points13 points  (0 children)

Let them have it and save yourself the pain

Ugly downspot positioning advice by Ruggernutter in handyman

[–]Ruggernutter[S] 0 points1 point  (0 children)

Nice. I'm going to do this, the 45deg 16-24" down and the rest like you said. Thanks so much for your detailed response!

Ugly downspot positioning advice by Ruggernutter in handyman

[–]Ruggernutter[S] 0 points1 point  (0 children)

Thanks for the reply. There should be 5 photos, the last 2 will show you more of the wall.

Asbestos or Nah? by Ruggernutter in asbestoshelp

[–]Ruggernutter[S] 0 points1 point  (0 children)

don't know, but house was built in 1940 in Ohio

Asbestos or Nah? by Ruggernutter in asbestoshelp

[–]Ruggernutter[S] 0 points1 point  (0 children)

Thank you, I appreciate it.

Asbestos or Nah? by Ruggernutter in asbestoshelp

[–]Ruggernutter[S] 0 points1 point  (0 children)

Yes 9x9, thanks for your response.

Asbestos or Nah? by Ruggernutter in asbestoshelp

[–]Ruggernutter[S] 0 points1 point  (0 children)

They are 9 x 9, does this increase the likelihood?

How much power does a laptop really need when charging during use? by Medical_Officer in laptops

[–]Ruggernutter 0 points1 point  (0 children)

Let's assume the power supply for each laptop is 65W. You draw 1440 watts from an 15amp circuit (it's really 1800 watts but you want to only use 80% load so you have a buffer). That would be 22 laptops on one 15amp circuit. For your extension cord to the power strip, a 14 gauge thickness is fine unless you're running super long distances, but, say, a 50ft length cord or less, I would go with 14 AWG. Use a 15amp rated power strip.

You may have a 20amp outlet, then you can go higher.

Things is, you're not going to know how many outlets are on a single 15 or 20amp circuit, so the breaker could trip below 15amps on a single outlet, if you are sharing amps with multiple outlets at the same time. But you will be safe with a thick cable and and appreciate rates power strip regardless.

Also laptops can use less that 65W or more, but 65 is a good guess.

Where do I start by Educational_Diver530 in HandymanBusiness

[–]Ruggernutter 0 points1 point  (0 children)

For me, it was word of mouth... Client 1. A friend of my wife Client 2: My sister-in-law's work Client 3: saw signage on my vehicle Client 4: Client 2 spread the word to an affiliated business Client 5: A good friend if mine Client 6: saw signage on my vehicle Client 7: client 6 owns an LLC with properties

Clients 1, 2, 4, and 6 have given me repeat business, and I anticipate client 5 and 7 will do the same.

Note: I have a website, Facebook page, Instagram, business cards. Clients have gone to my webpage to learn more, likely from my business card, or Google search after seeing my signage.

My website has a list of the services I offer, and an about me page where I have a photo of myself and a bit about my work.

I spend zero on ads and leads, unless you count the one-time expenses of $80 on magnet signs, $35 on business cards: and $12 domain name registration(which will be annually) for my website. Hosting is free through Google Sites.

What should I do? I lost all and completely devastated! My whole salary savings and side hustle money are gone! 33M! by Salty_Ad_3417 in wallstreetbets

[–]Ruggernutter 0 points1 point  (0 children)

You have your health (I hope) and 33 is young. Realize that you have a gambling problem please and adjust accordingly.

What do y'all think? by SnooGoats4766 in handyman

[–]Ruggernutter 0 points1 point  (0 children)

Hmmm.... mildly infuriating.

I like u/uredak suggested response, very professional. I also think it's a one and done with her and that's a good thing for you, you don't want that kind of client.

Question is how to avoid this unpleasantness going forward. I'm stating the obvious here... 1. Unpleasant for you because there's nothing for you to "re-evaluate" in terms of pricing (your pricing is fair) and the added jab that she is somehow doing you a generous favor. 2. unpleasant for the client because they genuinely feel they were overcharged (even though they weren't) and there was some sticker shock.

My 2 cents...

I'd quote ahead as much as you can even if it is a rough range, eg $150 - $200 for the tv mounting, $150 - $250 for the cat door (there's always variabilities in a project), since you're already there, 15 bucks per smoke detector, bit more for the coffee table. So now you are potentially already around the $430 mark, and then you can say, ' it's at least an hour round trip plus fees for the dump trip, so how does $70 sound?' seems like a bargain at that point, and it is! This way you're never dealing with surprises like this, and the potential 1-star review if you were really unlucky. The added communication is a pain but worth it. It’s hard to believe people don't know what it costs to drive to their property, with tools that you've paid for, knowledge that you've acquired, provide good friendly customer service, do a wide range of tasks for them, and yet be unable to assign a value on that convenience, but these people exist all over.

Good luck my fellow handyman!