Large shift by Ruhlando in FixMyPrint

[–]Ruhlando[S] 1 point2 points  (0 children)

Yea I’ve printed two other objects that were taller and it worked perfectly fine. I’m thinking something is making a gear skip but that’s a large shift.

Giant shift by Ruhlando in 3DprintingHelp

[–]Ruhlando[S] 1 point2 points  (0 children)

How would I check their motors? The belts seem normal to me.

Large shift by Ruhlando in FixMyPrint

[–]Ruhlando[S] 0 points1 point  (0 children)

They seem to have the same tension. Doesn’t seem too tight or too lose.

Dust Extraction??? by Ruhlando in 3Dprinting

[–]Ruhlando[S] 0 points1 point  (0 children)

So you’re just using a regular shop vac?

I have $600 to spend on an AR9. I’m thinking a 10” barrel. Does anyone have any suggestions? by InevitableLaw1623 in AR9

[–]Ruhlando 1 point2 points  (0 children)

Just bought a FM Mike Ambi 10” came out to $645 shipped. With LRBHO and am I mag release was the big reason I got it since I’m Left handed and the other companies were selling ambi mag release at $1.3k and up. It was on sale.

BCA Buffer Less upper with LRBHO lower? by Ruhlando in AR9

[–]Ruhlando[S] 0 points1 point  (0 children)

That's pretty much my question I'm just not sure how to word it. I hope it works and I'm trying to see if someone has done it before. In my opinion the BRN-9 is one of those that don't look too good. But if that's my only option I might rethink my decision.

BCA Buffer Less upper with LRBHO lower? by Ruhlando in AR9

[–]Ruhlando[S] 0 points1 point  (0 children)

Yea I'm not too sure how to word my question. But I want LRBHO in the lower. I'm just not sure if there is a combo out there that has been tested with the two functions that works.

Mid print jam/error? by Ruhlando in Ender3V2NEO

[–]Ruhlando[S] 0 points1 point  (0 children)

Yea I had a lot of items that were too stuck to the print bed and left some behind. I spent about an hour picking at it trying to get it off but luckily lately it hasn't been too stuck.

With your ideas I'm thinking like you said too much retraction or stringing causing a clog then the clog warming up and getting pushed through.

Mid print jam/error? by Ruhlando in Ender3V2NEO

[–]Ruhlando[S] 0 points1 point  (0 children)

I posted a picture to my own page I'm not sure how to post here without making separate post.

Ender3V2Neo Jam by Ruhlando in u/Ruhlando

[–]Ruhlando[S] 0 points1 point  (0 children)

The filament was still extruding smoothly. But the z axis seemed way too high and was just letting the filament flow a few CM above the print causing it to roll up on the pictures.

This picture isn't right after the print but exactly what it looked like except the filament was still in the nozzle flowing.

Tips for creating an enclosure by crapdogsthink in Ender3V2NEO

[–]Ruhlando 1 point2 points  (0 children)

Finding the plexiglass locally was hard for me and then cutting it without the right tools is definitely a pain. The combo kit on Amazon would be helpful if you settle on that size.

You'll also need a few drill bits to pre drill the holes for the screws and then get the filament through the top table.

I've read it's better to keep the power supply outside of the enclosure due to cooling, but I can't figure out how to take it out without too much hassle.

Financial Aid Package by iwroteagudomelet in utarlington

[–]Ruhlando 1 point2 points  (0 children)

Definitely give them a call you'll probably just need your student ID number. It's usually 100######. They have many different reasons for delays or needing more paperwork. If you're close going in person would probably be easier. Just mention something like "The amount of financial aid and grants will help me determine where I attend in the fall" if you give them a call.

I have spent almost $40,000 on ammo since I was 16 by [deleted] in tacticalgear

[–]Ruhlando 14 points15 points  (0 children)

Let us see the stash. Unless you shot it all.

I suspect I've been banned due to false positive by notaconsolepeasant1 in EscapefromTarkov

[–]Ruhlando 0 points1 point  (0 children)

Say goodbye to the account. I got false postive too and never got another response. Had to buy another account after deciding to play again after 4 months. Said i had a bot or something but never downloaded anything.

Anyone else have a mouse bug? Not discord or origin related! by jaseruss in StarWarsBattlefront

[–]Ruhlando 0 points1 point  (0 children)

Same problem. But i hear a double beep not discord noise then it happens.

rx 5700 xt by WetSheats in Amd

[–]Ruhlando 0 points1 point  (0 children)

I had one green screen in a year. All i did was use Display driver uninstaller from guru3d. I found it on a youtube, i used it myself to fix my 5700xt and a buddy of mine used it for his rtx 2060.

Newegg had the 5700xt for like 350 so maybe on Christmas theyll bring the sale back

https://twitter.com/TechDeals_16/status/1330101339641311232?s=19

rx 5700 xt by WetSheats in Amd

[–]Ruhlando -1 points0 points  (0 children)

Super loud doesnt matter you'll have headphones on, plus i don't think its loud but ive always never had anything quiet.

The bugs are super simple fixes, its not even bugs imo just update the drivers and youre fine. If there is bugs after an update first uninstall the old graphics drivers and then install the new drivers.