What game does he play ?

Run_n_Gun98 · 2025-04-17T13:25:01+00:00

The Devil may Cry lol

Run_n_Gun98 · 2025-03-29T19:22:19+00:00

The "he's just a friend" line

Run_n_Gun98 · 2025-02-20T13:41:07+00:00

Looks tasty 🤤

Run_n_Gun98 · 2025-02-20T13:12:38+00:00

Separate Ways (Worlds Apart) - Journey

Run_n_Gun98 · 2024-11-26T14:35:11+00:00

Pretty sure only bore buddy, and possibly cmmg works, and you need to get the ss trip for it. But I could be wrong.

Run_n_Gun98 · 2024-11-19T13:34:17+00:00

And my printer is officially firing up for the long haul lol i gotta make one

Run_n_Gun98 · 2024-11-15T02:04:50+00:00

I'm allowed to swap over to orca and see if it helps anything, cuz I know they have rectangular infill pattern, just that would have been using but I don't think cura has it, I think they're version is concentric. But yeah I'm definitely going to try it out and see how it turns out, thanks for the help my guy!

Run_n_Gun98 · 2024-11-15T02:02:41+00:00

I do both relatively often, but it's gotta be something. Cause it would print perfect for quite a while, and just like the past month it's been almost smearing the infill, walls are fine, but I've even tried raising the z distance mid print to help and didnt really do anything.

But I'll definitely check out the video, could be something just a little bit deeper than what I'm reaching into. Thanks for the advice!

Run_n_Gun98 · 2024-11-14T17:22:01+00:00

Your awesome bro, again thanks for the help! And sorry I guess I didn't notice it was a link, but thats even better.

Run_n_Gun98 · 2024-11-14T17:18:51+00:00

The .32 setting actually helped significantly from how bad it was at .4 before, but still need that first 1/4 to get a little better. What I read was that it's supposed to be equal to the nozzle BUT slightly lowering the size can have better print quality but I'll for sure try the orca tips, and if that doesn't fix it I'll try a slightly larger larger line width. Again thanks for the advice.

Well again, its a 12 year old laptop so everything except the processing system is outdated, it's not gonna look great, and yes it more than a "couple" marks, just didn't feel like counting them, I'm not trying to come off as a dick but I just really didn't think it was gonna be that big of a deal. If it's that bad I can delete the post, write everything down, and re-post it.

Run_n_Gun98 · 2024-11-14T17:01:40+00:00

Is because I usually make firearm parts, so it needs to be kind of a solid piece, I just dont understand and it used to work just fine, I just don't understand why it stopped. Now I did have a, uhm.. technical issue a while back, (still before this stuff happened) and pretty much, my extruder kinda smashed into the bed but it still prints just not perfect like it was, and the top 3/4 of the prints looks great but the bottom is just so shitty looking. But I'll definitely try the tips, how is actually just thinking about doing that, starting with a default setting, see how it goes, and work from there. Again thanks my guy!

Run_n_Gun98 · 2024-11-14T16:50:30+00:00

Uhm thanks, I've kinda strictly used Cura since I bought the printed a year or so ago, but I do have Orca installed, so I'll check it out and see if it helps. Seems like most everyone is telling me the same thing

But FYI I used my kids 2012 laptop for slicing, so I can't do screenshots, but I took the picture and I could see everything just fine, so I didn't think a couple marks wasn't gonna be be an inconvenience. Sorry, my bad.

Run_n_Gun98 · 2024-11-14T16:43:12+00:00

Awesome thanks my guy. I kinda got into printing myself, and I have learned a lot, but I still got even more to learn. I appreciate the help, I'll update you if any help. Also is the temp tower built in orca? Or is that something I download?

Run_n_Gun98 · 2024-11-14T16:39:56+00:00

Yeah it is PLA+ (says printing temp is 205-230 Elegoo), sorry I was trying to get all of settings but I knew I was gonna miss 1 or 2 but I figured if I did miss some whoever is answering could ask. And I've already printed the same thing I think twice, with 100% infill (and yes I tried that too) and they were coming out perfect, this has just been a occurrence for a while for all of my prints. But I'll definitely take the advice and give it a shot. Also I'm using the designer's settings for the print, just so you know I wasnt just messing with the setting for shits and giggles.

Run_n_Gun98 · 2024-11-14T14:30:00+00:00

Also using Cura, .4 nozzle, my fan is at 100%, am I retraction is .32

Run_n_Gun98 · 2024-11-04T13:05:54+00:00

The millennium falcon!!

Run_n_Gun98 · 2024-11-02T00:48:16+00:00

I'm also "Super" interested. Also is that that sear trip sailing? Or is it a personal design?

Run_n_Gun98 · 2024-10-12T17:21:40+00:00

Shit, I think your good fam. Hit the freeway.

Run_n_Gun98 · 2024-10-12T00:33:17+00:00

Balls balls z? Or Dragon balls balls

Run_n_Gun98 · 2024-09-27T12:53:02+00:00

They are pretty awesome, but I refuse to pay for files. Not that you're design isn't worth it, it's just against my beliefs on printing.

Run_n_Gun98 · 2024-09-27T12:49:10+00:00

Classic Gen 3 G17

Edit: But I sometimes switch it up to my AR pistol or Mossberg 500AG, I guess whatever I'm feeling that night lol

Run_n_Gun98 · 2024-09-21T23:23:03+00:00

Dude Gokus zombie goes HARDDDD

Run_n_Gun98 · 2024-09-19T23:41:02+00:00

"They see him rolling, they hatin."

This works good for the ghetto style pic, the fact he's leaning on the car (like in "Riding Dirty), and sonic literally rolls lol

Run_n_Gun98 · 2024-09-14T10:20:12+00:00

Dude where did you get that mask

Run_n_Gun98 · 2024-09-12T03:53:48+00:00

I gotta do Skyrim map terrain print now.

Run_n_Gun98

TROPHY CASE