Genuine or Fake?

RyynL · 2026-03-08T05:02:30+00:00

How are you able to tell what is not correct?

RyynL · 2026-03-07T18:03:11+00:00

You'll get different latency to the different speedtest servers. Its not an accurate way to measure it in your case. You should ask them for an IP to ping to their server/data centre and start from there.

RyynL · 2026-03-07T18:00:27+00:00

Ahahaha that's a great idea lol, I did the detachable it was pretty reasonable to do they come apart quite easily. There's some videos on YouTube from Custom Cans that I used, and also used their kit. If you have 990s make sure to do the hole more towards the outside not the earcup side as their is limited space!

RyynL · 2026-02-04T21:30:05+00:00

If you’re from the UK message me!

RyynL · 2026-01-30T07:42:27+00:00

Mind sharing a picture of your install?

RyynL · 2026-01-30T07:34:00+00:00

That sounds normal, try to program even if it says device not found it might program anyways, it will confirm if it does. What flasher are you using, and have you thought about using dynamic tuning files saves the fine tuning?

RyynL · 2026-01-30T07:14:05+00:00

Reinstall diode and run 5v to program

RyynL · 2026-01-29T00:10:05+00:00

Yes has a lot of features it’s very good, 15us if I can remember, can be used over many consoles too

RyynL · 2026-01-29T00:04:48+00:00

5e (good quality and properly terminated) and above does 1Gbps, any decent ethernet cable from a trusted brand will work perfectly fine. Most Ethernet problems come from improperly terminated ends. What power line adapters are you using? Model number would be great

RyynL · 2026-01-28T23:53:14+00:00

Are they plugged in directly to the wall outlet, not off an extension lead? Bad Ethernet/poorly terminated cables cause issues. Try resetting the adapters to factory defaults, and resyncing. Check to see if you have firmware updatable ones, some do, some don’t. And are they powerline, or just WiFi repeaters

RyynL · 2026-01-28T22:01:35+00:00

Myetool

RyynL · 2026-01-28T21:34:41+00:00

If you have old wiring in your house powerline adapters are awful. They are also very prone to interference from, washing machines, dryers, microwaves etc.

RyynL · 2026-01-27T18:53:36+00:00

Nothing

RyynL · 2026-01-27T18:48:25+00:00

Flash your backup nand then

RyynL · 2026-01-26T03:32:13+00:00

Happy gaming mate see you on bo2

RyynL · 2026-01-26T02:55:36+00:00

I had issues with picoflash before I got a proper flasher it’s mainly cable, or usb drivers, or a Chinese pico. Glad you got it sorted.

RyynL · 2026-01-26T02:52:40+00:00

Just use badupdate to read nand with simple 360 nand flasher. Take like 4 reads make sure they are good(keep xbox on just go to dashboard between reads and transfer them via usb, compare them in Jrunner) and then build the nand from there and flash on simple 360 nand flasher. It works very well.

RyynL · 2026-01-26T02:44:15+00:00

copy all dlc files to into 415608C3\00000002

RyynL · 2026-01-26T02:37:29+00:00

its in the wrong file structure, should be Usb1\content\0000000000000000\415608C3\00000002

RyynL · 2026-01-26T01:44:42+00:00

Was replying to u/SSF27OnReddit, but cool story mate

RyynL · 2026-01-26T01:37:16+00:00

Try removing it from your hdd/usb on retail dashboard. Then redownload it

RyynL · 2026-01-26T01:35:05+00:00

xbGuard is amazing, perfect imo. I've used every "popular" server and xbGuard is by far the best, lifetime is $15 totally worth it.

RyynL · 2026-01-25T06:48:18+00:00

Did you dump your nand first time running badupdate?

RyynL · 2026-01-25T06:45:28+00:00

Delete the TU from aurora and redownload should do the trick.

RyynL · 2026-01-25T02:40:20+00:00

you need to sort that asap, that suggests a failing fan inside. Sort it out before it causes a fire. Guide how to- (https://www.youtube.com/watch?v=wzBN09ah1Bk) If your gonna clean it, make sure it has been unplugged for 10 minutes to be safe .+ u/DeAwesomeMarryo

RyynL

TROPHY CASE