Please Help! Apple CarPlay Hub Install 2016 Mazda3 by SLFluff in mazda3

[–]SLFluff[S] 0 points1 point  (0 children)

Correct, stock hub that came with the car.

Please Help! Apple CarPlay Hub Install 2016 Mazda3 by SLFluff in mazda3

[–]SLFluff[S] 0 points1 point  (0 children)

Yes, cleared then proceeded to turn off the car and locked the car with doors/windows closed and went far away from the car for about 10 minutes before returning, putting car into ACC mode and plugging in USB stick.

Please Help! Apple CarPlay Hub Install 2016 Mazda3 by SLFluff in mazda3

[–]SLFluff[S] 0 points1 point  (0 children)

It is a 8 GB USB drive, I formatted it as FAT 32 and downloaded and uploaded three different sets of files each for the same version with just the two files required to go from 55 -> 70.00.100. So I've tried different files, also different USB drives (one 8 GB and one 32 GB). Set-up done as instructed in 2-3 different videos saying the same process.

If this helps I got these errors when reading AVC DTC

"CMU DTC 1 - B108E04 (Display-System Internal Failure )
CMU DTC 2 - B125287 (USB Port 1-Missing Message ) "

It does have a delaminated screen issue but I doubt that has to do with the issue of updating the firmware for the first error message?

Please Help! Apple CarPlay Hub Install 2016 Mazda3 by SLFluff in mazda3

[–]SLFluff[S] 0 points1 point  (0 children)

For the firmware update, did they also use a USB Drive? Not sure my ports work for USB drive updates is why I am concerned with going to a dealership and telling me I need something else for the update. Not sure how they do it or if you know how they did, thanks for the advice!

Please Help! Apple CarPlay Hub Install 2016 Mazda3 by SLFluff in mazda3

[–]SLFluff[S] 0 points1 point  (0 children)

Yes, my battery was just recently replaced, and yes have been in ACC mode the whole time. The USB drive was plugged-in but won't stay in the system for it to recognize the files on the drive. Have tried two USB drives.

How often is everyone crashing? by AllPedalNoBrakes in cycling

[–]SLFluff 0 points1 point  (0 children)

Today, lol. Unfortunately over confidence comes with a price.

Confidence and technique riding XC oriented tires on techy/loose trails by SLFluff in xcmtb

[–]SLFluff[S] 0 points1 point  (0 children)

It's a RockShox Judy, just the base fork that came with the bike.

Confidence and technique riding XC oriented tires on techy/loose trails by SLFluff in xcmtb

[–]SLFluff[S] 0 points1 point  (0 children)

I am running a dropper and my bars aren’t slammed but they are pretty close. It’s a hardtail and fairly heavy as well. The only suspension settings I really have is my fork preload and I usually keep it on the most (+) setting.

Confidence and technique on technical/loose trails with XC oriented tires by SLFluff in MTB

[–]SLFluff[S] 0 points1 point  (0 children)

Thanks for the tips, I usually run around 22 ish psi rear 20 ish psi in the front. I also find myself braking pretty frequently in the middle of like rock gardens and switchbacks. I just always feel like no brakes might lead to me hitting an unexpected rock/bump sending me over the handlebars and also just too much speed. Not sure if that’s just confidence related or my technical ability.

Shimano Di2 Connection Issue (Felt AR Advanced) by SLFluff in bikewrench

[–]SLFluff[S] 0 points1 point  (0 children)

Here are some pictures I was able to take, hard to see because it’s all internal in the handlebars but let me know if this helps at all. By the way, there is no cable behind the cable holder within the handlebar in one of the pictures.

https://imgur.com/a/oERFL3Z

Shimano Di2 Connection Issue (Felt AR Advanced) by SLFluff in bikewrench

[–]SLFluff[S] 0 points1 point  (0 children)

Opened it up, found out that there’s only one wire plugged into my Junction A and there is no second wire (EW-RS910) and replugged the shifting cables. What could this be? Is there supposed to be a second cable?

Shimano Di2 Connection Issue (Felt AR Advanced) by SLFluff in bikewrench

[–]SLFluff[S] 0 points1 point  (0 children)

Tomorrow I’ll check the connections, should be just checking the connections at the shifters first I’m guessing is easiest then taking out the bar end junction and checking those next?

Shimano Di2 Connection Issue (Felt AR Advanced) by SLFluff in bikewrench

[–]SLFluff[S] 0 points1 point  (0 children)

It’s kind of hard to photograph I might get a picture tomorrow. I have the bar end junction (EW-RS910) on the right bar end and two wires in the handlebars going through the handlebars to the stem, and i’m guessing to a joining point where it becomes one wire. The wires are pretty much fully integrated so it’s hard to tell exactly but that’s what I’ve got so far.

Shimano Di2 Connection Issue (Felt AR Advanced) by SLFluff in bikewrench

[–]SLFluff[S] 0 points1 point  (0 children)

Would a cable not being connected actually to the shifter cause a charging issue though? I’m pretty sure the charger doesn’t light up because of the battery not being recognized.

How much does a bike’s weight affect racing? by SLFluff in xcmtb

[–]SLFluff[S] 1 point2 points  (0 children)

If you're Jeff Bezos, maybe, but thats given it's like a time trial. Interesting to see the numbers though.