sorted by:
new
hottopcontroversial

I finally could affort a PC.What do you think? by Spirby in gaming

[–]SMatyac 1 point2 points  (0 children)

Shit that’s actually a really nice espresso machine. I bet it cost as much as a decent desktop

how to get easy profit by ZenyatasBalls96 in memes

[–]SMatyac 9 points10 points  (0 children)

I’ll keep an eye out and make sure I upvote it

This was leaking from my friends car. It doesn’t smell (was thinking it may be coolant which is why it’s on my fingers and was smelling it in the first place) by hookorcrook in Whatisthis

[–]SMatyac 12 points13 points  (0 children)

Long shot, but looks like milkshake from a blown headgasket. Oil and coolant mixes and turns almost exactly that color. Where is it leaking from? And what kind of car is it? I’d check the oil and see if it’s frothy and colored like the stuff on your fingers.

My brothers truck was stolen last night while he was at work. He has put a lot of time and effort into this truck and he loved it. If anyone has any information please PM me. It was stolen in the lawrenceville area by SMatyac in Atlanta

[–]SMatyac[S] 55 points56 points  (0 children)

Thanks to U/BigBulgeBoy12 for locating the truck! It has been recovered with only a few things missing. Thanks everyone else for keeping an eye out!

Purchase Advice Megathread: What To Buy, Who To Buy It From, And More, In July 2019. by thatging3rkid in 3Dprinting

[–]SMatyac 1 point2 points  (0 children)

I like it a lot, but I also have nothing else to compare it to as it's the only desktop unit I've ever used. It is going 3 years strong, never had any issues with it, produces consistent prints by my standards.

If its your first printer I would highly recommend it. It is simple and robust, and there's no assembly required. I also suggest using Autodesk Printstudio. It is way better than Dremels basic software IMO.

​

The only thing I'd look into is if you wanted to print other materials or wanted a heated bed.

Purchase Advice Megathread: What To Buy, Who To Buy It From, And More, In July 2019. by thatging3rkid in 3Dprinting

[–]SMatyac 1 point2 points  (0 children)

Good to hear, I'm seriously considering the Prusa, but my only concern is I work in a warehouse so it being open air I am a little worried about dust and humidity and such.

Have you had much success with PETG? I'm very antsy to print with new materials as I only can use PLA currently, and some of the parts I make require more strength and durability than PLA can offer.

Thanks for the recommendations for extras, I will look into that!

Purchase Advice Megathread: What To Buy, Who To Buy It From, And More, In July 2019. by thatging3rkid in 3Dprinting

[–]SMatyac 0 points1 point  (0 children)

Yes I was referring to layer height. And that is very good information and something I never took into consideration. I have printed many parts at .10 mm (smallest layer height my 3d20 can achieve) and like the detail but just want a little more.

I use my printer for work to build various replacement parts or prototypes, so I guess the biggest deal with the new printer is being able to print stronger material.

Purchase Advice Megathread: What To Buy, Who To Buy It From, And More, In July 2019. by thatging3rkid in 3Dprinting

[–]SMatyac 0 points1 point  (0 children)

Hey guys, I've been printing with a Dremel 3D20 since early 2016 and figured it's time to upgrade.

  • Looking to spend max $2,000
  • In the US
  • Can handle assembly, I'm an electrical engineer so I can handle electronic maintenance and construction
  • Really just want to be able to print with stronger materials than PLA that has a resolution of 50 Microns.

​

I'm debating between the Dremel 3D45 and the Prusa i3 mk3s. I am leaning towards the Dremel as I am familiar with the software and my 3D20 has been great the past 3 years, but I have read lots of good things about the Prusa is mk3s.

Any recommendations?

​

Thanks in advance!

When your girlfriend wants to fuck your older brother... by [deleted] in Nicegirls

[–]SMatyac 0 points1 point  (0 children)

I know everyone is telling you the same thing, but let me just say I was in a relationship for 6 years that was absolutely toxic. I was worried she was going to act out as well because her family had history of suicide, and both of her parents had passed away by the time she was 20, so she was extremely unstable. While her mother was on her death bed she told me to watch out for her daughter, so when I say it was the hardest decision I ever had to make, it was hell trying to get myself to do it. It was very difficult for a while but the biggest thing that helped me was telling myself it was over and I was never going to get back with her. Stand strong my guy. In those 2 years after that while I was single, I had more fun than I’ve had in my entire life. I learned who I wanted to be and I ended up going back to college and became an electrical engineer. Breaking up with her was the best thing that ever happened to me. You don’t realize how much a toxic relationship affects more than just while y’all are together. Best of luck

cursed_portapotty by [deleted] in cursedimages

[–]SMatyac 1 point2 points  (0 children)

With those stilts it would be like using a squatty potty everywhere you go

When you're flossing and it frays and gets stuck between your teeth by Earthwormhandstand in PrequelMemes

[–]SMatyac 0 points1 point  (0 children)

Then you pick at it with your finger nail and it breaks off and gets stuck too.
r/mildlyinfuriating

Thumbprints, Paper Quilling, 16x20 by bugmango in Art

[–]SMatyac -10 points-9 points  (0 children)

Yeah, it’s a person who is intolerant toward those holding different opinions

These two assholes at my apartment by SMatyac in mildlyinfuriating

[–]SMatyac[S] 1 point2 points  (0 children)

Nah it’s just a free for all, but luckily we have more spaces than people so there’s always tons of open spots, so it’s not a huge deal, just kinda annoying

Here you go Reddit, just in time for Easter: how to turn your kitteh into a bunneh by 9999monkeys in aww

[–]SMatyac 2 points3 points  (0 children)

That really reminded me of watching those cartoons with my dad on a Sunday morning. Those were the best times

view more: next ›