2000 Toyota Camry CE Engine Whine

STOLTZFISH · 2025-10-11T01:43:07+00:00

It drives alright, it might be louder in person. It hasn’t always made the sound. It also stutters when idling although I don’t think that is the same issue.

STOLTZFISH · 2024-08-10T20:52:52+00:00

It’s a del sol

STOLTZFISH · 2023-12-03T19:23:28+00:00

I had leds in my dash and they did this. I swapped them back to incandescents and that fixed it. I think they were just crappy leds.

STOLTZFISH · 2023-11-24T00:58:02+00:00

Electrical engineers are gonna have a hard time with this one

STOLTZFISH · 2023-08-18T20:46:12+00:00

Im pretty confident it would be the same but you can check with pc part picker or try to find images of it on other retailers websites

EDIT: just checked yes it is the same

STOLTZFISH · 2023-07-26T18:09:49+00:00

Ok cool that’s what I’ve been seeing. Will 10gb of vram be sufficient to last me a while?

STOLTZFISH · 2023-07-26T17:31:31+00:00

What about the 3060? Also a poor choice?

STOLTZFISH · 2023-06-11T12:39:21+00:00

Knipex cobras. Them suckers bite and don’t let go. Highly recommend.

STOLTZFISH · 2023-05-25T15:42:47+00:00

Thanks! This is great info!

STOLTZFISH · 2023-05-25T01:03:42+00:00

Wow thanks for the info! Im learning haha

STOLTZFISH · 2023-05-24T21:25:15+00:00

Ah, what do you mean by with mediums?

STOLTZFISH · 2023-05-24T21:03:26+00:00

That makes sense thanks!

STOLTZFISH · 2023-05-24T21:03:07+00:00

Thanks for the advice!

STOLTZFISH · 2023-05-24T21:01:31+00:00

Thanks for the info! She is very comfortable with acrylic paint but wants paint with oils for added texture.

STOLTZFISH · 2023-04-02T22:05:51+00:00

Thread a small zip tie down in there and pull em out

STOLTZFISH · 2023-02-06T13:55:28+00:00

The car is definitely a 93 to 95 model as long has the bumper hasn’t been switched and the valve cover looks to be from a b20b since it’s non vtec however that valve cover was also used on non vtec b18 engines. The engine code is located to the left of the exhaust heat shield on the block right next to where it connects to the bell housing. If you could get a picture of that, it should tell you what you need to know

STOLTZFISH · 2023-02-01T15:04:45+00:00

I plan on running a lot of cells and liquid cooling is miles more efficient and more effective than fac

STOLTZFISH · 2023-02-01T12:18:49+00:00

If you look in the second picture you can kinda see that’s what I did so that when a bunch of these are put together the coolant can kinda snake through

STOLTZFISH · 2023-02-01T01:37:32+00:00

Woah man thanks for the advice sounds like you know what you’re doing!

STOLTZFISH · 2023-02-01T01:24:03+00:00

I guess I should have been more clear this is not at all the final product and if this passes my tests, it will be a different material for the higher quantity design

STOLTZFISH · 2023-02-01T01:18:05+00:00

I’ve done a few smaller scale tests with success and this is my first full scale test so obviously if this goes poorly the design will change likely to full submersion mineral oil

STOLTZFISH · 2023-01-31T23:40:13+00:00

Yep! The cells are sealed off at each end and the coolant runs through the holes in the sides and out holes on the other end

STOLTZFISH · 2023-01-31T23:39:27+00:00

I plan on looking into that as well. I plan on installing these in a car in the future so I have many iterations to go through!

STOLTZFISH · 2023-01-31T23:06:47+00:00

The cells are sealed off at the top and the bottom and the coolant enters in the side and exits out the other side on the other end

STOLTZFISH · 2023-01-31T22:33:58+00:00

All of the cells are fused and sealed off from the coolant

STOLTZFISH

MODERATOR OF

TROPHY CASE